Original Iridium plugs FS

[jz]

Please guide me as I am new. I need to know the plugs for my Toyota Corolla 1.3XLi 2003-2008 with the engine 2NZ-FE non vvti and has manual transmission. It had some DENSO K16-U11 plugs and i wish to upgrade them so i added some slightly used K16R-U11 plugs. Now the car is missing so can i add some old K16PR-U11 plugs? We will be replacing our car soon so would like some guidance. Other wise the car is fully maintained. Thanks.

(This is my family car)

if possible what is difference in the upper mentioned plugs ?

i have the same corolla n im using denso ik20 which are oem iridiums for the 2nzfe
the denso u mentioned are copper,theres a lof of difference in copper n iridiums plugs
the iridium plugs willgive u improved milage,strgoner high rpms,improved performance n they have a life of 40k kms so u dont need to change the plugs after everfy 10k kms

[jz]

bump

[DemononWheels]

i have the same corolla n im using denso ik20 which are oem iridiums for the 2nzfe
the denso u mentioned are copper,theres a lof of difference in copper n iridiums plugs
the iridium plugs willgive u improved milage,strgoner high rpms,improved performance n they have a life of 40k kms so u dont need to change the plugs after everfy 10k kms

Brother thank you for your prompt reply but can you also guide me as to what my above plugs and differences are ?

I mean the missing issue on the K16-U11 and K16R-U11. Can i install K16PR-U11 and will it solve the issue, car is fully maintained but just needs plugs. Please read my previous post and guide me as to the difference in the above mentioned plugs and then please guide me on the copper and iridium thingie ... i want to know why my car is knocking.

[jz]

Brother thank you for your prompt reply but can you also guide me as to what my above plugs and differences are ?

I mean the missing issue on the K16-U11 and K16R-U11. Can i install K16PR-U11 and will it solve the issue, car is fully maintained but just needs plugs. Please read my previous post and guide me as to the difference in the above mentioned plugs and then please guide me on the copper and iridium thingie ... i want to know why my car is knocking.

your welcome
the difference is basically that the ik20 are iridium plugs,these are recomended by toyota for the 2nzfe
im not much into copper plugs but the between the k16u11 and k16ru11 is of internal construction the k16u11 is with resistor and the k16ru11 is without resistor
16 is the heat range which is 5,i would recomend u go tof 6 as v live in a hot environment
the knocking can be due to bad plugs or due to bad fuel

[jz]

anyone got any more questions

[a1ms]

anyone got any more questions

yes. where are my plug wires

[jz]

yes. where are my plug wires

hold ur horses Ahmed

[kasaas]

Still have denso sk20hr11 iradium plugs... How much for 3 as i have belta 1000cc

[coolsmart]

My car was missing some time back. I cleaned the plugs and the problem went away.
Later I purchased 8plugs (4 denso irrd + 4 plat ngk) from @jz and satisfied with it.
thanks.

[jz]

Still have denso sk20hr11 iradium plugs... How much for 3 as i have belta 1000cc

can easily arrange on advance payment

My car was missing some time back. I cleaned the plugs and the problem went away.
Later I purchased 8plugs (4 denso irrd + 4 plat ngk) from @jz and satisfied with it.
thanks.

thank u for the feedback buddy

[kasaas]

Same price or lower?..pm me

[jz]

Same price or lower?..pm me

pm'd

[jz]

got equivalent application in brisk ,these are 3 tip copper plugs
http://www.ngk.com/results_fitment.asp?pid=BKUR6ET-10

[nomi700]

what is the difference between Denso Irridium Power, Tough, Plus and racing series. Which series is more suitable for 1300 efi cars?

[roms]

price for ik 20 plz

[jz]

price for ik 20 plz

texted it to u bro

[jz]

what is the difference between Denso Irridium Power, Tough, Plus and racing series. Which series is more suitable for 1300 efi cars?

any one can be used,denso ik20 is recomended by the company and widely used as well as the plug is a balance plug for economy and power
the iridium racing are for puely performance purposes
the iridium touch is for purely economy
only the denso iridium is imported in Pakistan

[roms]

texted it to u bro

got it mate thnkx

[nomi700]

just checked the bar code of denso ik 20 from its website which is 5304 5, whereas the bar code shown in your pic is 5304 4. why is this difference??

[jz]

the website only says ik20

just checked the bar code of denso ik 20 from its website which is 5304 5, whereas the bar code shown in your pic is 5304 4. why is this difference??