Pioneer ip bus pinouts and playback

[mahmood]

earlier i have given aux input to kenwood head unit, following is the link for reference,

https://www.pakwheels.com/forums/d-i-y-projects/22718-diy-kenwood-headunit-aux-adaptor-2#post2507586

here a resistance is inserted to tell the HU for the input from aux source, and we select it from source button from our HU, all good

Now i have a pioneer stereo with ip bus port, pinouts for audio channels wont be a problem, my query is what about the selection of input source slection on the stereo, it had dedicated buttons for CD, Tape, FM and AM, searching on net also doesnt say anthing about that resistance thingy or selection of input source stuff, all DIYs i came acorss also was just connecting 4 pins to 3.5mm jack,

so anybody have any experience of aux in through ip bus port on pioneer and will hitting the CD button will give preference to input from the ip bus port rather the CD in the CD player itself?

couple of pics of ipbus for reference, the bule port is ip bus port

Regards,

[madhouse12]

Good question. I have a similar cable and was wondering about it. I think it should be in cd menu but not sure.

[humza_bilal]

no sir aux menu is normaly present in almost every pre all you hav to do is activate it frm function menu when pre or HU is in standby mode.some pre`s has aux1 or aux 2...otherwise it will show as changer

[mahmood]

no sir aux menu is normaly present in almost every pre all you hav to do is activate it frm function menu when pre or HU is in standby mode.some pre`s has aux1 or aux 2...otherwise it will show as changer

nops nothing like it there, i guess it has to be priority base, if there is changer attached or signal at aux port it have priority over the built in CD rom.

Good question. I have a similar cable and was wondering about it. I think it should be in cd menu but not sure.

sir ji before i start to smell soldering wire why not you give your cable a try and let us know.......