Now time will tell about the reliability. Hope they will last longer then expected.
Excellent, i cannot find these for USD 35 on Ali Express and i can only see Front Shocks how did you find Rear Shocks? Can you please provide the link?
Please see below snapshot of my order
Here is the link of the store. As you can see from the order snapshot above, you need to two sizes i.e. B type and C Type.
https://www.aliexpress.com/item/Buffer-in-the-car-2pcs-lot-Car-Auto-C-Type-Shock-Absorber-Spring-Bumper-Power-Cushion/32429284922.html
Well first test passed as I traveled through PWD road to Bahria Town Rawalpindi without hitting any of the breakers (both ways) :).
This post was flagged by the community and is temporarily hidden.
Well you have to measure it. Use any paper or visiting card and put it between the springs and mark the gap. (The car should be standing on normal and even surface).
Once you have measured, match it with the size mentioned on the seller page. The nearest or perfect match is the size for your vehicle.
thanks, one more question,will this cushion buffer effect on smoothness of driving or harmful for suspension. my car is Daihatsu Move 2014.
thanks
Well for me the experience is very good, specially the cornering is improved. There is slight or negligible improvement in ride smoothness. I don't think its harmful for the suspension in any way...
dose buffer make ride soft?
Yes, Marginally.
Bro, are You still happy/satisfied with ur Polyurethane Buffer??
Have You checked material on service deck etc. that whether buffer got any stiffness/ brittleness/hardness?If not then hopefully it may last 2, 3 years in total.
It is still going good. Not sure about the softness but there are no cracks or wear & tear at the moment.
Did you get a chance to test them in Lahore?
Have anyone used these on honda city?
Is there any place in Islamabad/Rawalpindi or online source for these buffers other than overseas(because they won't ship in my area)?.
You may like to check daraz online store.
I did, there was only one Pakistani shop listed with only one size left and not much information about car sizing. Has anyone experienced these buffers with Corolla 2009 - 2014 model?
I installed normal metallic spacers on the rear shockers of my Prius 3rd gen & it’s ground clearance become good. It’s been 2 years now & it’s going absolutely fine with no issues in cornering & height clearance. Much better than replacing the recommended tyres as it may decrease the fuel efficiency.
