Project Charade GTi All motor

[yasir_88]

Interior pics please !!!

[starletgt]

In janaab ka Engine Honda D16 Hi-comp ha if I am not wrong .....

HAHAHAHA...
Yes

[starletgt]

There are no factory undersize replacements for the 4EFTE engines, their cranks are nitrided hard at the factory and the bearing shells are hand picked and matched to the rods and crank. If the crank is worn or the rods damaged, you need to replace the crank or get it nitrided again put it up in a high speed crank cut machine to polish the journals with bevelled sides.

The piston rings that you are showing do not seem to be the Cr-moly items that Toyota used. They are pretty expensive, If you do want to install new rings then you should hone the bores in 3 stages. My suggestion would be to run the engine gingerly after this "rebuild" it cannot take any sort of "thrust" from the added pressure and consequent stress from the turbocharger.

Dear engine is not 4efte..
It D16z6 high compression

[starletgt]

^ u mean HIGH COMPRESSION engine THA! :-p

Yep engine THHHHHHAAAAAAAAAA not only THA....

But now.... engine is completed again ....

Knock totally finished......
Compression controlled.....

[Xulfiqar]

man - I want to pull my hair now - this message was for a PM reply - timeouts and copy paste error somewhere here.

Mods please delete my post from here.

[SpoonMotorSports]

no wonder why your inbox is always full ehh?

[Xulfiqar]

tell me bout it.

[mzeeshan]

yes i knw @starlet and it means i have been deceived too , zeeshan yahiya has the pictures of the installation which was going step by step.

Any ways if you need any thing from my side do let me know.

Next time i will make sure " Not to Trust" any body as i have been glinched too.

and you are using the same rod y ? don't take more risk

[starletgt]

no im not using same rods...

[starletgt]

[starletgt]

Here are some pictures of FU***ED UP PISTONS!!!

[starletgt]

Guys Following work has been COMPLETED recently...

1. Complete brake overhauling.(Max Extreem Motor sports)
   a. New Orignal gTti Brake Pads.
   b. New Orignal gTti Break shoe.
   c. New break booster and cylinder.
   d. Break pins and caliper parts.

2. Suspension work.(Shah Jee)
   a. New ball joints.
   b. New excel Boots
   c. Some minor repairs (Bushes etc)
   d. New shock absorbers. (Front and Rear)
   e. Lowering springs.
   Car lowered and completely stiffed.

3. Some Awsome parts.
   a. Orignal GTti front grill.
   b. Rear CHARADE garnish.
   c. Indicators.
   d. Head Lights.
   e. Parking Lights.
   f. Fog lights.
   g. Brake lights

[starletgt]

[starletgt]

[OwaisYunus1]

I hope you arent going with that garnish with the lights that you've posted because they dont match. This is the right garnish for it,

[starletgt]

Only difference in that garnish is "16v".
I will make an sticker of that..
Good point out.

[babarhashmi]

really awesome stuff, where did u get it? is it available in local market or sourced from foreign?

[awadkhan]

Hahahahhahahah.....

TAKKKKKKKKKKKKKKKKKKKARRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR

(H)

[salik990]

Hahahahhahahah.....

TAKKKKKKKKKKKKKKKKKKKARRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR

(H)

gud to see u here after long time

[aqibasit]

really awesome stuff, where did u get it? is it available in local market or sourced from foreign?

Everything is availalble in KHI