Project Charade GTi All motor

[starletgt]

looks like someone gapped the rings too small on pistons too loose in the bore then tried a few runs with a lean engine nearing redline rpm.

Dont know any thing about it....
But i didnt get any chance to reach that red line...
because pistons were too loose in the bore:P as u said so.
Ask M.Zeeshan!

[starletgt]

Guys need following stuff
1. Water temp, oil temp, rpm, oil pressure guages.
2. VAFC
3. Turbo timer

[N2O]

just to give you an idea for prices:

1- guages would be anywhere from 3-8k per piece depending which one you go with.

2- with that you need oil adaptor and water adaptor,again prices range from 1.5k to 2.5k per piece.

3- vafc used for about 15k

4- turbo timer for anywhere between 10-12k

Everything is available at optimum motorsports.

[sadiaali]

waiting for new images,,,,,,,,,,,

[SER_GTR]

After Reading All The Happenings...!!
Feels Very Sad And Wish You Good Luck....!!

Never EVER Trust On Stuff Like That Till You Watch It With Your Own Eyes.....!!

So Many People Just Want A SWAP......Don't Know Anything...Ruin It And Then Sell It Silently And Escape From All The Khuari....!!
All The Suffering Goes To The Person Who Got The Car....!! Always RECOMMENDED To Build Motor On Your OWN Till You Know Someone Trustful Or Have Seen Stuff With Your OWN Eyes

Anyways.......Good Luck And Hope You SORT It Out WELL....

Suffering Is LEARNING WE All Did And Learn Great Lessons....!!

Almost Everyone Here Who Swap Suffers Alot And LEARN From It...

[SpoonMotorSports]

stay away from vafc go for chipped ecu

[SER_GTR]

Whatever You Do......Keep An EYE On AFR's And Knock 1st....!!

[starletgt]

Whatever You Do......Keep An EYE On AFR's And Knock 1st....!!

Yep. Sure

[starletgt]

stay away from vafc go for chipped ecu

y???? :S

[starletgt]

just to give you an idea for prices:

1- guages would be anywhere from 3-8k per piece depending which one you go with.

2- with that you need oil adaptor and water adaptor,again prices range from 1.5k to 2.5k per piece.

3- vafc used for about 15k

4- turbo timer for anywhere between 10-12k

Everything is available at optimum motorsports.

yep i know...
But i need it from here.
not from optimum.

[vyrus]

VAFC isn't for such setups bro its basically entry level

[SpoonMotorSports]

y???? :S

if you are willing to set-up for an allmotor project with high compression pistons altering map voltages with vafc will make your ecu read a higher advance ignition map which will lead to insane knocking and before you know its knock - you will be shopping for a new piston/rod

[SER_GTR]

Standalone....................................!!!

[mzeeshan]

i am almost getting a hold on a vafc not a vafc 2 for you. will tell you when i
have it

[vyrus]

Bro either piggyback ecu or standalone. Nothing else OR BE PREPARED FOR FCK UPS.

[salik990]

i wud prefer chipping of p08 ecu......u know Awad he can do it for u

[starletgt]

Man ive HONDATA s200

[N2O]

^^ thats more like it now

[hamza91]

VAFC isn't for such setups bro its basically entry level

bro VAFC can b run on stock setups?????

[vyrus]

Man ive HONDATA s200

yet you still wanted VAFC ? damn bro ....