Project Dhoom YD 70 Upgrade to 110cc

[asjdsm]

sprocket is looking of good quality.Y nt 16 tooth?

i thought the upgrade should be gradual,, so first trying 15 t then i have 17 tooth lying with me,, i will check a 16t if either one doesn't performs well or if got a slight indication that there is a room for improvement ..

also most mechanics were suggesting 15 t

[overspeed111]

i will check exact mileage using a 100ml method to remove any ambiguity,, and will share it,, may be tomorrow or the next day,, but m using it for quitesome time ,, and it seems that its avg is not different from what it used to be, but will test it,,,

yar local so called ustaads and mechanics sa bahoth tang hotha houn as they know nothing an then they talk as if moding is a sin,, anyhow as soon as i get away from them i m ok and energized,, i like it ,, i like doing mods

and ma ciggerate nahi peetha is lia nahi thaktha

hahahah...good
well how to measure 100 ml if someone dosent ve flask to measure it .is there some desi method to measure it.i also want to measure the mileage of my bike.

well good going on the bike and also be thankful to dhoom and local mechanics who made you mechanic...
in mechanics say to ALLAH TALAH he bachaen .
bro from where you brought gauge for tappet adjustment?

[daniyalahmad]

another update is that my bike was with friends and they went to murree on it,, though they enjoyed it but the meter needle is now free it just swings,,

Is it back to normal now?
I dont know what is wrong with Muree?
Whenever I go to Muree on bike, as soon as we cross the toll plaza the speedometer needle of my bike goes crazy.
When we enter Rwp it comes back to normal.
Dont know is it due to the extra body vibrations or what?
A close friend took his CG125 to Deosai and he encountered similar problems with the tachometer of his bike.

[asjdsm]

^^hmm,,

i have just changed the sprockets,,not checked the meter or sprocket response,, i have been to murree quite a few times but never got such issue,,just this time but that's in my opinion just a co incidence,,that it happened in murre,,
will check it,, so is ur normal now?
suppose if mine doesn't returns to normal ,what r the solutions?
tappet gauge can be bought from any hardware shpop,, in raja bazar,and gawal mandi,,, there r 4 tpres of tappet gauges one is just a strip that is i think 1 foot long that gauges up to .05mm and costs 90 rs..
another is the one that mechanics use which has a bend and two sides measurement of .05mm and .08mm ,i couldn't find it easily,,
another is multi values that contains 2 inches strips of thickness ranging from .05mm to 1 mm , i ,mm using it don't re,member the cost but its cheap,, and there is another of the same type but the quality is far superior ,, that wont get any rust, u can bend twist and it wont cut,,
that's a bit hard to come across,,,, just buy either multi valued one,, that's good,,

[daniyalahmad]

^ Yes all is good now.
It could be a co-incidence but this needle thingy always happens to my bike so I felt that something might be wrong with Muree.
The speedometer can be repaired or replaced.
Any guy who repairs speedometers can tell you what exactly went wrong with your speedometer.
Sometimes its the speedometer cable or the hub gear in the front hub that is damaged and causes this vibration.

[asjdsm]

it is working now,,bizarre behaviour,, i haven't done any thing to it,, the gear was ok last time i checked it,,however it was pretty messy as the grease was the default one,, i think i need to really clean and grease it,, what grease should be ok for such purposes? i have one grease that is greenish in colour and its refereed as aalo grease,, really cheapo,, also tell price and brand of good grease that i could use in this motorcycle,,

[daniyalahmad]

^ Check the gear for its free movement the next time you open the hub.
If you feel something is creating problems in its free movement then remove it and clean it then use some good grease for it.
I might have the old gear lying around with me somewhere, will post its pictures if Im able to find it.
It was jammed completely and it broke 3 speedometer cables in 4 months.
I use Caltex Multi purpose lead free grease, works fine for me.

BTW You should contact Xulfiqar.
He must know which grease should be used.

[bravo122]

bro do u still have the 70cc engineand carbourator??
r they in working condition??
i need em for a project??
from where did u get the 100cc engine and how much did it cost??
i need these to fit in a bike whoses engine is goner

[asjdsm]

y i have the carb not for sle.. u can buy from a range of carbs,, get a genuine one that would cost between 1300-1500 buy genuine dyl or honda cd 70,, if uu want to go chinas maal then i have very bad experience with crown lifan carb,, most ppl here recommend future carb,,
u can get a used genuine carb of cd 70 from auto race at 500 ,, that's near commoittee chowk i think,,
i would recommend u a genuine...
i didn't bought the entire engine but just the piston cylinder and head ,, i thin i paid 1800 for cylinder ,, hell expensive,, and 1600 for head i think,, piston was with cylinder,,,

bought from auto race ,,

[bravo122]

ok

[hlharr]

.

So is wrong with a bit right here and little there involving something correspond a essential or section dish? Little or nothing, if condiments are accustomed in small amounts.Use a rediculous amount of, however, and it may adding ideas to your diet that you don't really need

[zleng]

.The freedom to generate.The flexibility to invent.The freedom to arrange chord patterns in how you require.

Does that mean playing by means of written song is not as much important as opposed to playing as a result of chord icon? No.The opportunity to play by means of written music can be an extremely helpful skill, one of which even one of the most famous pros don't maintain

[asjdsm]

today i completed 500 km run on my newly built engine,, and thought to check its mileage,, from observation i noted that on normal ride involving high speeds its giving me better results,, but a true figure was necessary,,so the mileage comes out to be 90km to 2 litre of petrol that is 45 km/ltr,, and this test involved very mix riding ,, speed was always above 60 ,, mostly at 70-80 km/hr,, some time was with double sawari.. the test icludied a ride to chattar park its very hilly area,, so its very good,, i earlier did calculated avg on this rout that was 40 km/ltr when bike was defaullt,,

so awesome result so far,,,

[hidalgo]

like it 45kmph
its great

[asjdsm]

now a test in economy speed is left,, and hope its economy speed will be in 50-60 km/hr range. will do a test involving this speed range,,

[hidalgo]

ahsan bhai wo test kren 100ml fuel wala
so that exact avg pata chalay

[asjdsm]

inshahlah wo bhi karoun ga,, but i like the test of using reserve ,, that is quite perfect,,
the 100ml test is needed when u r damn sure that r bike is not giving good avg,, so the best way then is to make it 100 % sure to get the results which company caims,,and they claim ideal results,, or rather to say very precise results,,

i quoted that i used 2 litre petrol ,, i put two litre petrol because i thought with just one litre precision would not be achgieved,, so went for two litres of petrol..
i m sure the results compare truly to what ihave nnoticed about its consumption,, at least now it is giving me more power with improved avg,

[daniyalahmad]

today i completed 500 km run on my newly built engine,, and thought to check its mileage,, from observation i noted that on normal ride involving high speeds its giving me better results,, but a true figure was necessary,,so the mileage comes out to be 90km to 2 litre of petrol that is 45 km/ltr,, and this test involved very mix riding ,, speed was always above 60 ,, mostly at 70-80 km/hr,, some time was with double sawari.. the test icludied a ride to chattar park its very hilly area,, so its very good,, i earlier did calculated avg on this rout that was 40 km/ltr when bike was defaullt,,

so awesome result so far,,,

45km/litre is very good at the speed and the area mentioned by you.

[N0m1]

45 km\l.Great!
With more power.(H)

[asjdsm]

please need ur suggestions regarding the following issues raised in forst post,, till now no input ,,,c'mon guys

Now, one mechanic suggested me to use the following
1: qinqgi clutch gear..and he said it costs 800-900 rs in new..
2: and also to upgrade to 3 discs/plates clutch boxa...( infer for yourself
what he meant.)
3:someone also suggested me to open the ports ( portain khuli kara lain)
4: replace the paper type filter element with a foam type ,,

also suggest a good mechanic..in pindi islamabad..

thanks..