Project EG: Revival of the Glory

[shabbir.1]

Some of the emblems that I have collected so far....

[hamza_xeg]

Great work done so far

[ShahbazBalouch]

Going great guns

[Badpigs]

@Badpigs

Waqas Brother the last picture that you have pointed at has a thin layer of dust over it, as these pictures were taken around 4 to 5 days later after the paint job was done and since then the car was parked in open in the workshop, and I didn't want to use cloth to wipe its surface.
This surfacing matter was discussed in detail with the painter and it has been agreed upon and it is obvious from the result as well that there is no single reason of doing grit work so only polish (compound) will be done and that too with hands, when all the pending work (electrical + mechanical) is finished so as there is no chance of getting any scratches while the car is in the workshop(s).
The paint work if not exactly as like done in the factory, but in no means less in quality form that. It took more than a month to prepare the surface of the car before the paint was applied and the workers daily worked on the finishing of car through the day.

Oh k , its better to take experts advise - if the painter agrees with hand then u should let them do it as they are experts when it comes to hands
And yes u can always get work far better than company provides u - u have already put alot of effort into it
Yes, after all the work is done , then its the best time for polish
Waiting for the happy endings . Allah naseeb karey

[amm]

Awesome job on mirrors too ........best of luck !

[Mubashir97]

Epic work. And updates?

[born_2b_wild]

ma sha Allah..no words to describe how much am inspired by ur effort..very very well done..btw would these dome tweeters fit corolla ee80 ? the shape of the base seems about the same..

[shabbir.1]

ma sha Allah..no words to describe how much am inspired by ur effort..very very well done..btw would these dome tweeters fit corolla ee80 ? the shape of the base seems about the same..

Thank you so much brother......
I think they should fit. They are made to be fixed through a hole and fastening with a nut over the screw stud. I will fit it tomorrow in the side mirror back-fill panel and will post it pictures here.

[ENGINEERzz]

Yes I will put 'em back. They were removed to be colored separately. And yes they were hand made with steel plate as at that time I was short of money so didn't made them on tooling or on CNC machine.

Here is there picture with base coat on.

can u source them for me ?

[born_2b_wild]

Thank you so much brother......
I think they should fit. They are made to be fixed through a hole and fastening with a nut over the screw stud. I will fit it tomorrow in the side mirror back-fill panel and will post it pictures here.

my pleasure bro..kindly share their price with me if possible and their availability

[shabbir.1]

can u source them for me ?

No Brother these are not ready made ones, I give its design to my denter and he made them for me. I will share its 3D design here tomorrow InshaAllah.

[ENGINEERzz]

No Brother these are not ready made ones, I give its design to my denter and he made them for me. I will share its 3D design here tomorrow InshaAllah.

ohk thnx else i will import them;)

[shabbir.1]

3D view

sketch with dimensions

shaded sketch view

[misteek]

this thing at the front is ruining your car's looks.... its way too big and it is never installed horizontally i guess...just my opinion

[Deadly_Flame]

^^ It feels the same to me. Is it supposed to be protruding to that extent?

[shabbir.1]

this thing at the front is ruining your car's looks.... its way too big and it is never installed horizontally i guess...just my opinion

^^ It feels the same to me. Is it supposed to be protruding to that extent?

It is not only the tow hook, in fact the whole car is inclined towards left and it is because of the "Fisheye" effect of the camera lens. The length at which the hook is extended is also all right as it can be judged from the pictures given as reference, moreover it is not an item with OEM fitting so it all depends upon the holes that are drill in the bumper beam.
It may look weird to many as it is totally a new idea here in Pakistan.

On Honda Fit

[madhouse12]

load bearing areas should not have sharp corners. the Nonagon eye has corners which act as stress concentration points and might crack when load is applied. use a round shape eyelet instead.

[shabbir.1]

^madhouse12 brother it is just a garnishing item, though it is strong enough to tow the car as it is made of MS plate of 10mm thickness. You are right, as the number of sides of a polygon increase its holding strength increases as well until it reach an infinite value or become a perfect circle.

[shabbir.1]

@born_2b_wild

The original assembly

the crimped leads are removed from the connector

the left two are the old side mirror internal fill panels, they will be drilled to fit the tweeters

two holes are drilled one for the stud and one for the wires (the third one was drilled at a wrong place but it won't be visible as the tweeter will cover it)

here it is, the final shape (nut is not tightened that's why there is small gap between the two)

[shabbir.1]

Recently bought this Panasonic CY-RC50KD rear view camera (made in Japan) in very good condition with complete accessories.