Project "Laadli" - My Toyota Corolla GLi 2010

Tags: #<Tag:0x007efca6c8fd58>

askhokhar (askhokhar) 2011-06-06 13:12:43 +0500 #6141

First sheet stuck to the outer sheet metal

askhokhar (askhokhar) 2011-06-06 13:13:10 +0500 #6142

askhokhar (askhokhar) 2011-06-06 13:14:16 +0500 #6143

Nobody takes any photos when I work ... Khair .. a self portrait ... LOL :)

askhokhar (askhokhar) 2011-06-06 13:15:10 +0500 #6144

I can bet Madhouse is photographed more than Katrina Kaif ...

askhokhar (askhokhar) 2011-06-06 13:16:40 +0500 #6145

Okay .. back to DIY ...

It is important to stick the Dynamat sheet to the metal using this roller .... first gently, and then push it hard ...

askhokhar (askhokhar) 2011-06-06 13:17:09 +0500 #6146

askhokhar (askhokhar) 2011-06-06 13:17:36 +0500 #6147

askhokhar (askhokhar) 2011-06-06 13:18:35 +0500 #6148

Now this was left of the first sheet ... after doing the top

askhokhar (askhokhar) 2011-06-06 13:19:37 +0500 #6149

It is important not to waste any bits of Dynamat ... so plan carefully while cutting it

askhokhar (askhokhar) 2011-06-06 13:21:25 +0500 #6150

It is easy to peel the brown sheet off ... but the Dynamat is very very sticky ... especially in the hot June .. it was very sticky ... I had taken my heat gun with me, but we did not need it ..

askhokhar (askhokhar) 2011-06-06 13:21:57 +0500 #6151

askhokhar (askhokhar) 2011-06-06 13:22:50 +0500 #6152

The lower piece of Dynamat going into the door cavity

askhokhar (askhokhar) 2011-06-06 13:23:17 +0500 #6153

askhokhar (askhokhar) 2011-06-06 13:23:49 +0500 #6154

askhokhar (askhokhar) 2011-06-06 13:25:10 +0500 #6155

It is not advisable to peel a Dynamat sheet and then insert into a cramped door cavity ... first peel off just a little ... place it into position, and then removed the remaining brown sheet

askhokhar (askhokhar) 2011-06-06 13:26:16 +0500 #6156

The lower piece now being rollered ... (is it a new word that I just coined?)

madhouse12 (madhouse12) 2011-06-06 13:27:08 +0500 #6157

looking at these pics i am feeling the aches, scratches and tiredness once again... damn it was such tiring work...

askhokhar (askhokhar) 2011-06-06 13:27:13 +0500 #6158

Now peeling off the remaining part of the sheet to cover the remaining portion inside

askhokhar (askhokhar) 2011-06-06 13:29:20 +0500 #6159

Madhouse does not usually complain about anything .. but as you remember, he complained on 4th June, and now he has complained again today .... but it was very hard to work under those conditions .... so he has a right to complain several times over:D

Great work done Sir ... !!!

A 31 Gun salute for YOU!!!

askhokhar (askhokhar) 2011-06-06 13:30:37 +0500 #6160

Now he covering the left over portion under the door lock