Project "little monster". Modifications for hunting

[machine]

why have you extended the body from rear ? doesnt it looks out of balance from rear?

[noman8ff]

No. In fact it is to keep the balance of the extension. It looks odd now as the rear portion has different color but will be OK when finished.

[machine]

@ Imtishal & Taimoor Ayub & Machine

Thanks for the compliments and input. I will think about it definitely.

@ Tareen

With olive green, do u want something like this.

I would suggest this type foot boards and rear fender flares too

[noman8ff]

Not suitable for mine. The above vehicle has broad tyres and must be having some after market engine in it. It will be a miss match with the existing engine and otherwise it has a negative effect on your suspension.

[noman8ff]

Today fixed the seats. The below two pics are of the two positions ie extreme back and full forward. Normally, it will be somewhere in the middle of these two.

[noman8ff]

Body painted black to avoid rust.

[noman8ff]

Body painted black to avoid rust.

[noman8ff]

Checking the engine and gear mounts. New foundations purchased.

[volverine]

best of luck wid the project

[noman8ff]

The denting and grinder work completed today. From tomorrow, the paint work will start. I hope to complete it in a week or so. There'll be a painter working ONLY on my suzuki. Have finally selected "OLIVE GREEN" in "MAT FINISH" for the vehicle.

[aamir567]

The denting and grinder work completed today. From tomorrow, the paint work will start. I hope to complete it in a week or so. There'll be a painter working ONLY on my suzuki. Have finally selected "OLIVE GREEN" in "MAT FINISH" for the vehicle.

Anxiously waiting to see in final LOOK

[hidalgo]

The denting and grinder work completed today. From tomorrow, the paint work will start. I hope to complete it in a week or so. There'll be a painter working ONLY on my suzuki. Have finally selected "OLIVE GREEN" in "MAT FINISH" for the vehicle.

2strokes have always been source of attention either its bike car or jeep
silently i have followed this thread
n m wating for the outcome
best of luck:)

[noman8ff]

Although the result of the existing modifications will be different from the original shape but have a look at some beautiful LJ50's.

[asifcae]

great project ....
best of luck with it

[noman8ff]

Cleaning before paint work.

[hayzin]

Cant wait to see what it looks like after paint, do share pics as soon as possible

[noman8ff]

So far so good. The leveling of body done with very little "poteene" on it. Inshallah, the paint will be done on saturday. I just need your suggestions. I am painting the vehicle "alto green mat finished". It's lighter than army green and dark than angoori. Have some very little touch of light brown in it.
I just want to know if i can paint any of the following items in black or should they also be painted the same color as of the vehicle.

1. dash board (which is of steel)
2. front grill
3. doors
4. front bumper
5. roll cage
6. front and rear seat covers
7. rims

Waiting for comments.

[tareen]

I would humbly suggest:

1. dash board - Same as body color, for authentic looks as well as lighter dashboards are helpful to toggle in dim light
2. front grill - Same as body color
   3. doors
   4. front bumper
   5. roll cage
3. front and rear seat covers - Corolla's greenish-beige or grape color in vinyl or leather (as they call it) rather than fabric. A better choice for open vehicles
   7. rims

Item 3, 4, 5 & 7, I suggest to try gun-metal grey in matte (not typical gun-metallic. This will give a rustic - rugged look and will go along well with the rest of matte paint job without emphasizing hi-lights and creating contrasts [/I]

All the best.

[noman8ff]

OK thanks. All your 4 mentioned items can be painted later on. I will load pics of the vehicle when painted and than you can again re consider. Thanks once again.

[farazarif]

Anxiously looking forward to pictures with the initial paint,
the progress is excellent and I'm sure it will turn out to be an awesome vehicle in the end.