@ Project Suzuki GSX 750 @

Tags: #<Tag:0x0000000591a2d0>

mum65 (mum65) 2007-05-20 13:35:00 +0500 #21

good man bst of luck.....

imranbhatti (Imran Bhatti) 2007-05-20 16:06:00 +0500 #22

The Chassis seems like GSX 400 or GS 550. "R u sure it is GSX 750 Chassis? As GSX 750 & 1000 shares same chassis & its quite heavy for 400CC engine from GSXR.

BTW u have nicely done the job can u post some more detailed pics.

Red89 (Red89) 2007-05-20 16:35:00 +0500 #23

thankx....dude i dont remeber that much i was 15 when i bought this like i said the chassis was 80% like urs....tha only difference was that there were dual headlights n tha rpm meter started from 3000rpm it was a 1982 model again not sure cause it was 2-3yrs bak....i know tha engine was changed n i m pretty sure that it was a 400 gsxr but in tha book it was written 750cc i was told it was writen 750cc cause of tha chases i got another receipt of tha engine telling that tha engine was changed.....most of tha pics r lost i'll try to find some n post....thankx again for tha appreciation .....

malikg115 (malikg115) 2007-05-21 04:01:00 +0500 #24

@ WAT U WAN 2 DO IS OUTSTANDING
DON GO FOR THAT
IT NEEDS 2 MUCH ALTERATIONS
PLZZ

imranbhatti (Imran Bhatti) 2007-05-21 07:18:00 +0500 #25

Meters head light & Handle locks being removed as all those things are not working right now

imranbhatti (Imran Bhatti) 2007-05-21 07:29:00 +0500 #26

Dirt on Engine

One Bolt beneath the Engine Block was loosed & Causing oil drip

The Bolt is tightened now

imranbhatti (Imran Bhatti) 2007-05-21 08:05:00 +0500 #27

While removing rear break caliper i have found that leather on one break pad is missing & metalic pad was directly grinding the disk so removed them to get them repaired

imranbhatti (Imran Bhatti) 2007-05-21 08:37:00 +0500 #28

Both front Disk's calipers removed for inspection of barke pads one set was worn out the other one was okay but i removed both for repairng.

malikg115 (malikg115) 2007-05-21 09:21:00 +0500 #29

@ imran
pra g y don u start ur 5s dealership for HARLEY DAVIDSON ?

imranbhatti (Imran Bhatti) 2007-05-21 09:25:00 +0500 #30

Some desi jugars done on Carb's air filter pipes two pipes are even missing with these jugars & sucking direct air widout being filtered.

The original one

Below pic shows the space gap betwwen Carb & Pipe

imranbhatti (Imran Bhatti) 2007-05-21 09:31:00 +0500 #31

@malikg115

I m ready U just needs to ask Harley Davidson for this dealer ship.

BTW i have haered about 3S shop wat is this 5S?

imranbhatti (Imran Bhatti) 2007-05-21 10:20:00 +0500 #32

Speedo Meter cable removed for repairing.

Removing coupling pin mounted on engine head which moves RPM meter's cable.
It needs replacement. New cable also requires to operate RPM meter.

imranbhatti (Imran Bhatti) 2007-05-21 11:12:00 +0500 #33

Missing rubber bush in rear Shock absorber

PuNk (PuNk) 2007-05-21 11:28:00 +0500 #34

Good Luck With The Project

humy (humy) 2007-05-21 11:35:00 +0500 #35

GL, this is my restored baby, mashAllah...

sunny234 (sunny234) 2007-05-21 11:37:00 +0500 #36

nice .best of luck with the project

imranbhatti (Imran Bhatti) 2007-05-21 11:41:00 +0500 #37

Some variants of GSX 750 sharing same Chassis & Engine.

Now I m thinking to select the model shown in 1st pic as a target.
As i have tried to find Square meter & Head light but havnt get yet & it seems very hard to find same light & meter as shown in 2nd pic.

imranbhatti (Imran Bhatti) 2007-05-21 11:57:00 +0500 #38

So far these were the things found fualty or missing in my project bike. I have planned to fix all these issue first & get the bike back on road then i will obsreve the all things for more improvement if required & after that the bike will be under gone for full paint/chrome job.

imranbhatti (Imran Bhatti) 2007-05-21 12:17:00 +0500 #39

New rubber Bushs for rear Shocks

Shock widout bush

Bush fitted in Shock absorber

imranbhatti (Imran Bhatti) 2007-05-21 12:23:00 +0500 #40

Break pads after getting repaired

Rear Break Caliper installed wid new break pads