QG18DE Error Codes

[syncview]

The amount of vehmi I am, they make sure they do things right, and to make things right, which very rarely come to them, they take this much time

That is gooood.

[aliam_786]

install power antenna on trunk....instead of this....

[aliam_786]

@star2 try to find antenna of super saloon original...

[star2]

Ali you are late now New antenna has been bought

Sent from my RM-821_im_mea3_502 using Tapatalk

[SER_GTR]

The amount of vehmi I am, they make sure they do things right, and to make things right, which very rarely come to them, they take this much time

In Karachi , Mechanic Calls This Type Of Person 'Nafsiyati' Even I Am Not That Much Like You Do But Still I Am Given This TITLE Already.......!!

You Are Going For Genuine Color Or A BIT Change??? And Make Sure You Get Paint Baked And Sprayed Nicely With Hardener And Lacquer With Alot Of Fine Sanding To Ensure Perfect And Long Lasting Results With Some Eye Candy Shine

[star2]

In Karachi , Mechanic Calls This Type Of Person 'Nafsiyati' Even I Am Not That Much Like You Do But Still I Am Given This TITLE Already.......!!

You Are Going For Genuine Color Or A BIT Change??? And Make Sure You Get Paint Baked And Sprayed Nicely With Hardener And Lacquer With Alot Of Fine Sanding To Ensure Perfect And Long Lasting Results With Some Eye Candy Shine

The paint will remain the original, no change as the doors are not going to be painted, they are good.

[ZEE82]

@SER_GTR @spectra @IsbCap @fnsatti @ZEE82

Here are some updates going on....

Bonnet ready for base coat......

Roof base coat applied...... creamy creamy

QG sleeping

felt very good to see an update after a long time

[aliam_786]

@star2
did those ventilated disks are fitted?

[spectra]

@star2
did those ventilated disks are fitted?

i dont think they are a direct fit and since he is quiet about it i assume they are not done yet. He only share good news here.

[star2]

@star2
did those ventilated disks are fitted?

i dont think they are a direct fit and since he is quiet about it i assume they are not done yet. He only share good news here.

Hahaha

They are a bolt on fit - @spectra you are forgetting that we used original N16 axles and so the hubbs are subsequently a bolt on fit, they are sitting quiet at the moment under the wheels fitted - perfectly fine and aligned - just the brake oil needs to be put in and brake needs to be made yet again but I could not update on it because the painters are on the car now and they are soaking the wheels white with their water and ragrai, so its all over and they are not letting anybody do anything now... so no updates except that car is ready to be painted tomorrow InshaAllah.....

[star2]

@spectra

and by the way, I have always provided bad news to which you have raped well to the point that a beautiful thread needs to be closed lol lol (and now please take it as a light comment, no offence meant big bro)

[spectra]

I can take your comment as light as u took my feedback on your thread which is closed now.

[star2]

I can take your comment as light as u took my feedback on your thread which is closed now.

Saqib bhai, suggest something to source out rear wheel disc brakes for B13 from somewhere....

[Xulfiqar]

for best results in painting, spending time in prep work pays off in the end, lots of 3M paper and easy comfortable seating position will give you results that will literally dazzle you.

Ive made a freind here in Houston, he owns an old mercedes which he sanded himself and had a shop paint it, he spent 4 months (weekends only) sanding it - and honestly the paint is 200% better than what mercedes benz painted at the factory. Even in raw unfinished state it was more dazzling than a new fully finished E350 on the showroom floor.

[Xulfiqar]

In Karachi , Mechanic Calls This Type Of Person 'Nafsiyati' Even I Am Not That Much Like You Do But Still I Am Given This TITLE Already.......!!

You Are Going For Genuine Color Or A BIT Change??? And Make Sure You Get Paint Baked And Sprayed Nicely With Hardener And Lacquer With Alot Of Fine Sanding To Ensure Perfect And Long Lasting Results With Some Eye Candy Shine

hmm - I was known by some very weird names, but I didnt visit mechanics for repairs.

[star2]

for best results in painting, spending time in prep work pays off in the end, lots of 3M paper and easy comfortable seating position will give you results that will literally dazzle you.

Ive made a freind here in Houston, he owns an old mercedes which he sanded himself and had a shop paint it, he spent 4 months (weekends only) sanding it - and honestly the paint is 200% better than what mercedes benz painted at the factory. Even in raw unfinished state it was more dazzling than a new fully finished E350 on the showroom floor.

This B13 is sanded twice, yes, I'm carefully saying, it is sanded twice.

and the boys are sanding it from January 8th. I don't say that they sand it the whole day, but its a lot of sand to be done, almost the whole car. Main points to sand include...

pillers, roof, bonnet, panels, trunk, inside trunk, fenders, bumpers, center pillars, main frame under fenders.....

I hope for good results...

[SER_GTR]

Ragar STAR RAGAAR

[aliam_786]

Hahaha

They are a bolt on fit - @spectra you are forgetting that we used original N16 axles and so the hubbs are subsequently a bolt on fit, they are sitting quiet at the moment under the wheels fitted - perfectly fine and aligned - just the brake oil needs to be put in and brake needs to be made yet again but I could not update on it because the painters are on the car now and they are soaking the wheels white with their water and ragrai, so its all over and they are not letting anybody do anything now... so no updates except that car is ready to be painted tomorrow InshaAllah.....

what about break booster is it with stock break booster....

[star2]

what about break booster is it with stock break booster....

It is not with break booster, it is with brake booster

I've upgraded it with the CD20 version one. It is bigger and have a bigger distribution chamber as well.... don't know what its exactly called, that is fixed in front of the booster itself...

[aliam_786]

It is not with break booster, it is with brake booster

I've upgraded it with the CD20 version one. It is bigger and have a bigger distribution chamber as well.... don't know what its exactly called, that is fixed in front of the booster itself...

i think proportional valve?
and mere pinouts b check ker dain...