Rebirth of Khyber 1996 - Daniyal

[Hassan1991]

@capsat @nnabeel done sir.
@miqdadkanani your thread.

[nnabeel]

Sir, ik baat yeh hai k most of the car owners have no concept or knowledge of about how the coolant works and then when they go to mechanic, they give them the same story " sir yeh system to bahar k mulak klye hai and coolant se zung lag jata hai" paisa kharach na karen, fan direct karen and ac ka pani dal den kafeee.

[nnabeel]

@miqdadkanani as for the vaccum lines, @brownrose78 and @mustansir44 have khybers and both are in karachi. u can make a meetup at irshad and do the vaccum lines.

[miqdadkanani]

Sir, hylomar tube isn't available. Would this work instead?

[miqdadkanani]

Also, since I wasn't satisfied, I made another visit to Malik Engineering. Malik saheb explained to me that the head was already welded before and he just faced it a little that's why he was suggesting to use standard gasket. I bought the Japanese KP one.

[hammadsohail]

Sometimes I wonder why these basic things are not taught in schools, Basic stuff should be a part of the curriculum, harr kisi ne gari chalni hai kabhi na kabhi basic cheezen harr insaan ko pata honi chahiye and i still see even PakWheels videos are not educating people correctly just saw this video of Suneel munj sahab in this whole video he does not even say this radiator water should not be in this condition nor never use tap water in your radiator,I know this video was about sudden heat up but one of the root cause of that was rusty cooling system and it happened just because of using tap water,these things should be educated correctly to young people and video is the best way to teach.

[Xulfiqar]

This is not replacement of hylomar.

[Xulfiqar]

In my opnion, thats the owners fault then. And also their fault again when they wear their wallet in place of their glasses and only measure with "money spent" rather than "quality recieved"

[capsat]

Hylomar is availale at daraz @Xulfiqar 1 tube is enough for such application ?

[Xulfiqar]

Yes - one tube is far more than enough for this job.

[capsat]

@hassan1991 Thank you

[miqdadkanani]

It is. But It will take 5 days to deliver. Irshad will work on this tomorrow.

[capsat]

dial Ahsan Autostore - 0315 7291514 visit their store pay & collect ask them for their website or product brochure and share here for others as well. Thank you

[miqdadkanani]

Just a side question. How did you find the contact details? I tried to find more details on daraz app before asking here but couldn't.
Also, I visited many shops on marriot road. Some claimed they used to have but not these days due to import issues. They asked me to visit after 4,5 days.

[capsat]

@xulfiqar sir alternate for hylomar - which permatex product will work? it may be available at www.adenwalla.org located at shahrae liaquat opposite sindh madarsatul islam

[capsat]

Just a side question. How did you find the contact details?

i scrolled to read comments from buyer and i read the reply of advertiser in words he shared whatsapp ./ phone contact details to avoid breach of daraz terms. they must be having an outlet or stockist in Karachi

[Xulfiqar]

permatex sell a fuel resistant sealer - which is basically the same as hylomar.

[miqdadkanani]

https://www.adenwalla.org/product/permatex-form-a-gasket-no-2-sealant/#1584957189449-45b09786-2112

https://www.adenwalla.org/product/permatex-form-a-gasket-no-1-sealant/#1584957189449-45b09786-2112

The above 2 products are available at adenwalla. First one is gasoline resistant and the second one specifically mentions manifold gasket in its Application. However, the actual fuel resistance sealant that permatex manufactures is not available.

[Xulfiqar]

This is what I was mentioning.

[Xulfiqar]

The no.2 sealant can work with paper gasket but wont work for long on plain metal gasket.