Restoration and modification of Suzuki Khyber by Typeracer

[typeracer]

Today i went to the denter and he started to work at the back as well

[typeracer]

too much polygate in the car u can easily see the cracks

[basimulhaque]

will you be swapping the motor ??? if so which one ??

[typeracer]

few more

[typeracer]

yes i will be swapping the engine but not for now because too much cost will be applied for the basic shape to come then after i will decide what to do

[typeracer]

I have a plan to put G13B in it

[typeracer]

Driver side foot body replaced but need some finishing

[typeracer]

The dent is removed from the rear fender on the car

[typeracer]

Wheel installed to chk the gap between wheel and bumper

[typeracer]

More adjustments has to be made on the rear of the car. The car was pulled from behind it was hit by the truck from the rear few months back and disturbed the alignment of the rear part badly

[typeracer]

This door frame is in bad shape the denter is trying to repair but i told him if it cant repaired then change the door

[typeracer]

This side of the roof need some work too its a little out of shape

[typeracer]

This part is all rusted but still its strong

[mzeeshan]

uff yaar adil abhi bhi dekh lo , dam its all messed up yaar

[typeracer]

Pata hai yaar but denter bohat profesional hai is ne 86 corolla banaye hai pics send karo ga us ka pura rear part change hoa hai aur pata he nahe chal raha

[typeracer]

I went to the denter today and bought lots of stuff for my car

[cooldevil]

good going!keep it up!

[typeracer]

Here is the list:

1. Head light pair (made in Taiwan)
   2800/-

2. Back light pair (made in Taiwan)
   1300/-

3. Parking light pair (made in Taiwan)
   350/-

4. Fender light pair (Pak suzuki local)
   180/-

5. Bumper lights (made in Taiwan)
   270/-

6. Front grill (made in Taiwan)
   700/-

7. Diggi pati (made in Taiwan)
   180/-

8. Back light patti (made in Taiwan)
   120/-

9. Door rubbers set (made in Thailand)
   1600/-

   1. Gatri (Local)
      850/-

   2. Chassis plate (Local)
      400/-

   3. Balance rod plate (Local)
      400/-

   4. Door window rubber outer (made in Taiwan)
      500/-

   5. Door window rubber inner (made in China)
      300/-

   6. Front doors body latch (made in Taiwan)
      550/-

   7. Rear door body latch (made in Taiwan)
      650/-

   8. Diggi latch (made in Taiwan)
      550/-

   9. Latch holder (tassi) (made in China)
      600/-

   10. Dashboard screw cap (made in Taiwan)
       300/-

   11. Dashboard switches cover (made in Taiwan)
       350/-

[typeracer]

Khyber parts are available but only few shops have them

[typeracer]

i Finally found side rubber