RP Storm Evolution II

Bike Forums

Other Bike Makers

evo

Tags: #<Tag:0x00000009403978>

mateen001 (mateen001) 2014-07-02 09:11:57 +0500 #241

Sorry about your bike but when will you show us Ravi Storm 250cc custom ed ????

vickytulla (vickytulla) 2014-07-02 09:36:02 +0500 #242

I dont have a 250cc ... I only have one RP and one engine which is now installed in it..

ammarzahid (ammarzahid) 2014-07-02 12:00:06 +0500 #243

vicky bhai you have 550.. btw you should make a thread for that please..

vickytulla (vickytulla) 2014-07-03 08:31:38 +0500 #244

My H.U.D right now

vickytulla (vickytulla) 2014-07-03 08:50:06 +0500 #245

couple of days back @mqsdrana visited my office an I had a chance to ride his brand new bike Its handle was hard to rotate but seating position is much agressive then old model and @abobilly's point of view was right this is it .... this handle bars + footpegs add on is a must have on a bike like RP if you really want to take the Fun factor to whole new next level.

tucknoloji (tucknoloji) 2014-07-03 12:15:00 +0500 #246

i love his bike.... maqsood bhai

Sent from my Galaxy Nexus using Tapatalk

SyedMoazzam (SyedMoazzam) 2014-07-03 12:20:46 +0500 #247

@vickytulla please write complete review about the engine which you have installed and the mods you had to do to run it properly

Juste (Muhammad Zabrij) 2014-07-03 14:13:01 +0500 #248

Kya hawai jahaz banana ha isay? Btw nice mini cockpit

vickytulla (vickytulla) 2014-07-04 04:25:15 +0500 #249

syedmoazam I will do write when I find some time but if I summarise = Sheer Power + Brutle Accelration, I am waiting for running period to end soon so I can check the topspeed as well.

thanks juste

angel82 (Uzair Qadir Vance) 2014-07-04 05:17:15 +0500 #250

WoW looking aweseme sir. Heat gauge also matched Water cooled engine and radiator fan etc making it Sexy Waiting for break in period then coming for Test ride to Hiran Minaar

abobobilly (abobobilly) 2014-07-04 18:56:50 +0500 #251

@vickytulla! More pictures man. Why u playin' wid our emotions like dat? :S

I DEMAND more info

Shafin619 (Shafin619) 2014-07-04 20:40:12 +0500 #252

Awesome work vicky bhai hats off

vickytulla (vickytulla) 2014-07-07 04:18:00 +0500 #253

brothers I dont want to give wrong info to any body... I am my self learning all the falls and the sucesses for the very first time as most of the time before I got engine upgrades by help of mechnic in his shop this is my first truely DIY in my home in my own garage alone... not to mention I fried the CDI while wiring it and the bought another one of Sazgar rickshaw..

right now the radiator is failing to coupe with engine its a small radiaoter once I will be done and bike will be bullet proof I will share the comeplete stopry step by step inshAllah...

All I can say right now it the extreme power gain , I can make it front wheel fiddle and go off ground for split second in 4th gear as well with gruesome accelration.

but as humans ko bhi thora time lagta hai liver transplant k bad new liver k sath use too honay men tu bas wohi time lay rahi hai is waqt bike..

abobobilly (abobobilly) 2014-07-07 04:28:42 +0500 #254

@vickytulla ! Atleast share some proper pictures so we could drool in the meantime

vickytulla (vickytulla) 2014-07-07 05:36:28 +0500 #255

I did not do any speciall foto shoot or any thing but jab jab
time mila pic banaye while the whole process....

I swaped engine in home all by my self then did basic wiring to start it up..

Paiggio Engine removing in my back room ...

Comparing both, the new engine weighs less and has less mass.

Toughest part to put the new engine to frame all alone .... took help from cealing fan to hang the engine..

Voila Fitted!!

next day took her out did some test runs without water then installed radiatior but no fan

Felt so much satified with accelration even with this fat trye bike made donuts..

Radiator is slim and small only at one side as on this side its exhaust pipe.

Shifted the Ignition Coil under seat as there is no room for her under tank now

Added Paiggio (Orignal) tappa to engine..

fan added

heat gauge added.

mqsdrana (mqsdrana) 2014-07-07 05:52:45 +0500 #256

Awesome

noblerider (noblerider) 2014-07-07 06:38:55 +0500 #257

awesome piece of engineering....

SyedMoazzam (SyedMoazzam) 2014-07-07 11:27:27 +0500 #258

Truly epic

ammarzahid (ammarzahid) 2014-07-07 12:14:52 +0500 #259

vickytulla;4440394:

I did not do any speciall foto shoot or any thing but jab jab
time mila pic banaye while the whole process....

I swaped engine in home all by my self then did basic wiring to start it up..

Paiggio Engine removing in my back room ...

Comparing both, the new engine weighs less and has less mass.

Toughest part to put the new engine to frame all alone .... took help from cealing fan to hang the engine..

Voila Fitted!!

next day took her out did some test runs without water then installed radiatior but no fan

Felt so much satified with accelration even with this fat trye bike made donuts..

Radiator is slim and small only at one side as on this side its exhaust pipe.

Shifted the Ignition Coil under seat as there is no room for her under tank now

Added Paiggio (Orignal) tappa to engine..

fan added

heat gauge added.

Saluuuuuute bhai jaaaaaan

Kindly tell how does the new engine sound?

Sent from my LG-F160K using PW Forums mobile app

vickytulla (vickytulla) 2014-07-08 05:28:40 +0500 #260

it blasted my exhuast now sounds like a yamaha 2T without buffle becuase all the Jalis are ripped by pressure so I will put the stock silncer back this weekend.