RP Storm Evolution II

[mfaizandawood]

[mfaizandawood]

[mfaizandawood]

[mfaizandawood]

According to my tiny knowledge all these engine have same mounting positions at same place and same distance so to me these all should fit perfectly well, can u provide some info if they can be imported, what could be the cost and are they available in black.....
i personally liked that water cooled 250cc 4 valve engine but it must be quite expensive??
and can u again share the model of that engine.

[mfaizandawood]

sir meray walay RIMS tu aik or Piaggio men lag bhi chukay hain ab tak as i know, but istran k RIMs bari asani say mil jatay hain Heavy bikes market say... give me a call and I will tell you few shops where you can get a good bargain.

and what about carburetor will it be included in engine price or we will have to buy it separately??

[vickytulla]

you can find all your answers here :

https://www.pakwheels.com/forums/sale/235256-250cc-150cc-125cc-engines-sale-lahore-pakistan

[taha66]

yes bro at that time he had almost 5,6 pairs of original RP clip ons which were sold by new RP owners to chitta denter and he was asking 3500 rupees and he also said that there bars couldnt be source from anywhere else in the market

@abobobilly I have a "news" ... I was hearing from various "new model RP" users but I thought it just there "Waham" that there shoulders get stiff or some thing...

Untill @taha66 told me in his last visit that he found multiple pairs of RP orignal Bars for sale on Alteration shops like chitta denter and he was selling it for 3500RS (where as Ravi Guys as for 7k ) ... he said he went into doubt that why people are removing these bars from there rides...

Now one of a good friend indicated me (who recently switched from GS150 to RP new model) that GS was more comfortable and now he has started to revert from these bars to stock Handle which was comming in 20114 and prev. models....

And I was like really ? WTFISH ??

[mfaizandawood]

you can find all your answers here :

https://www.pakwheels.com/forums/sale/235256-250cc-150cc-125cc-engines-sale-lahore-pakistan

very informative forum indeed.
two more questions are those engine available in black color??
and did u imported that 250cc, 4 valve, water cooled engine before?

[vickytulla]

Black Color yes,

imported 4 valve = not yet but if you are willing then I can do it for you.

very informative forum indeed.
two more questions are those engine available in black color??
and did u imported that 250cc, 4 valve, water cooled engine before?

[onefifty]

What will be the advantage of 4 valve engine?

[addictivesundew]

Vicky bhai. Sorry for an offtopic question, but i am a bit confused between buying a RP or a GS. Can u help? Can i get ur contact #? I sold my bike few years back when kite string cut my throat. But now i have realised that in Lahore, car driving is very difficult because of heavy traffic. btw i drive a prius these days.

[addictivesundew]

.. I'm not a racer, just want a good bike that looks just amazing..

[vickytulla]

.. I'm not a racer, just want a good bike that looks just amazing..

Ravi Paiggio 125

It would have been GS150 if you needed speed Dominance on Highway and you were OK with Retro Looks, and CG PowerPlus if you were into Torqueee City Road Runners.

[tahirahmad13]

Vickyy brother, are their some sort of stylish safeguard available for Piaggio pls? Plus i also intend to change its engine but not before 2 yrs.

[vickytulla]

Most of the people find its short front fender quiet ridicoulous (including me) becuase in rain or water it just leave any part of engine or rider which it do not make wet...

Look at this picture this ride belongs to @seen4u since 2008 and see how he has handle the front water splashes and look at the rear crashbars ~ Footrest area, it can be found in Mcloed Road and fitted to RP.

Front Crash Bars of many types are also avaiable but I never put thought on it.

Vickyy brother, are their some sort of stylish safeguard available for Piaggio pls? Plus i also intend to change its engine but not before 2 yrs.

[mfaizandawood]

What will be the advantage of 4 valve engine?

valves per cylinder determine how well an engine can breath both inhale and exhale, normally our bikes have 2 valves per cylinder which cause lose of power on higher rpm as bike have to exhale and inhale from one hole each and at 8000 rpm each valve is opening and closing 34 times in a second just imagine how fast the bike have to inhale and exhale, while in this four valve per cylinder engine bike can breath very well even at high rpm although the opening and closing is same here (34 times) but as there is more area to breath air in and out of engine so the bike can deliver its best at low, medium and high rpm while our bikes does't perform well at high rpm range

[mfaizandawood]

Black Color yes,

imported 4 valve = not yet but if you are willing then I can do it for you.

black color mil ja ay to maza a ja ay and i hope it is powder coated black (matte finish).
my budget is 35k and i don't think its price tag is near 35k.

[addictivesundew]

Ravi Paiggio 125

It would have been GS150 if you needed speed Dominance on Highway and you were OK with Retro Looks, and CG PowerPlus if you were into Torqueee City Road Runners.

I like the looks of GS over RP, but going through another PWer's thread on GS, i got a bit hesitant.

[vickytulla]

yes people with a thing for "Retro Looks" wpould definatly like its classic shape over RP moderinsed design. then what made you hesitant ?

I like the looks of GS over RP, but going through another PWer's thread on GS, i got a bit hesitant.

[addictivesundew]

yes people with a thing for "Retro Looks" wpould definatly like its classic shape over RP moderinsed design. then what made you hesitant ?

Heard that GS haz some major misalignment issues because its chasis is not straight. Also electronics r not reliable. Missing issues. Overall quality decreased alot since the first launch of GS in pak.