Self Tunning - Khyber G-10 (Plugs, valve clearance, spark gap etc)

[anon71378895]

This post was flagged by the community and is temporarily hidden.

[hassantahir2]

apny to engine abhi benwaya tha ?

Bhai you are mixing the person's..
I got the engine overhauled...

[anon71378895]

This post was flagged by the community and is temporarily hidden.

[aftababc]

AliExpress sy 24$ ki aik bar packge gyb hogya deliver nahe hua , dosri bar order place kia phr mila

[anon71378895]

This post was flagged by the community and is temporarily hidden.

[aftababc]

Yahe waka hai ghr bythy deliver hojay to r kia chaheay, but agr parcel gyb hogya ya phr tax lag gya tab b khawari hogi

[anon71378895]

This post was flagged by the community and is temporarily hidden.

[speedster_101]

Yes, Continentals are good. I am using them in my Corolla and they are performing quite well. A friend has Yokohama Advans in his Corolla, same model and we pressed brakes on a slope with same speed. His car slipped, ABS engaged while my car with Continentals didn't slip an inch. Tried this multiple times. Same result. However I don't think you will find fresh Continentals in small sizes.

[speedster_101]

I have heard that Dunlop SP Touring R1 has better results as compared to Touring T1

[speedster_101]

Yes, Sonar SX-608 are great tyres in this size. Using them on my Khyber.

[speedster_101]

Do not buy tyres from Sultan ka khoo. Most of these are used tyres. I have seen them re-grooving the tyres and then packing them as new. They also edit the dates.

[hassantahir2]

I have heard that Dunlop SP Touring R1 has better results as compared to Touring T1

Dunlop Touring R1 are only available in bigger sizes ATM i haven't even seen them in 13 inch size personally they are available in 14 and 15 inch only..

[speedster_101]

They were available in 13 inch size at Blue Area Islamabad when I was searching for new tyres. But the width was 165, not 175.

[hassantahir2]

Ohh.. Here in FSD haven't seen them at the shop's i know. Now most of the shop's are keeping Chinese tires here.
I think @Deadly_Flame previously had Yokohama 165/70R-13 if I'm not mistaken..

[car.need.care]

OK i will do my self i have compression gauge

You don't have to do that it's recomended to me by @RehanBhatti for my friend's khyber.

[aftababc]

1st cylender 115 psi
Wet 120psi
2nd 120psi
Wet pa barish start ho gae to sab kuch wet horaha tha ic liay phir sahe

[hassantahir2]

How you guy's are doing compression test?
Another guy got the compression test and he got same values as your test...

The limits for Suzuki G10 are 156psi min dry test and normal is 190-199psi can't remember this value exactly.

When i got the compression test at about 2 lac 70 thousand km factory sealed engine. Values came out to be around 135psi for dry test all three cylinders and after getting the overhaul done values were near 200psi for dry test.

[car.need.care]

When I turn off my car engine some visible smoke can be seen coming out of the carburetor from air filter assembly smaller pipe which is connected with PCV and tappet cover with a small hose.

I saw this, when I removed that hose.

PCV valve is working nicely.

What does it mean?

[hassantahir2]

My car used to do the same when the engine was weak. Although all the other components were in good shape...

[brownrose78]

@hassantahir2
Bhai please mention your method of calculating Cylinder pressure & guide us difffernece between dry test & wet test.
What apparatus you used?