Self Tunning - Khyber G-10 (Plugs, valve clearance, spark gap etc)

[smijaz]

@Cracked

I saw some thread about a lexus meter in khyber, search it out. i am now wondering how his meter is working in a khyber or may be his khyber has a swapped 4 cylinder efi engine.???

[cracked]

ijaz bhai i think tht lexus meter was installed by rozzz,the member who swapped in 1.3 or 1.5 in khyber,he got tht meter!i dont knw if ur talkin abt the same!
BTWrpm meter of cultus is good option but it wont fit in the meter..how about me buyin a cultus meter n change its parts into my current meter tht has rpm n normal speedo meter...can it b done,i mean the machinery will b changed and the front will remain the same,this way no alteration will b needed,its surely gonna cost extra bucks but worth it if its possible!

[smijaz]

ijaz bhai i think tht lexus meter was installed by rozzz,the member who swapped in 1.3 or 1.5 in khyber,he got tht meter!i dont knw if ur talkin abt the same!
BTWrpm meter of cultus is good option but it wont fit in the meter..how about me buyin a cultus meter n change its parts into my current meter tht has rpm n normal speedo meter...can it b done,i mean the machinery will b changed and the front will remain the same,this way no alteration will b needed,its surely gonna cost extra bucks but worth it if its possible!

Yes , it was @Rozzz's khyber and he has a G15a swap.

i think, Cultus meter is not an option and may not worth the trouble. I would recommend you to find the digital one which came in old jdm swift 1988-1989. it will be a bolt on fit but very hard to find.

[cracked]

im thinkin to sell off khyber n move on to some bigger car,
better to buy a out of market car so it wont cost me too much extra..
thinkin to go for kia spectra..
forget the resale,wat u say abt this car???

[Xplorer]

Which thermostat valve would be good for khyber?
1) Genuine (Calorstat, Made in France) 82°C rating but used (Kabli type)
2) New, Chinese or Taiwanese type
Finding a new genuine one would be difficult or costly.

[Xplorer]

@cracked
Spectra is a great car but would not it be difficult to find its parts?
What about Kia Classic? Its parts availability is better than Spectra.

[cracked]

kia classic ive heard is even worse in pick than khyber..
spectra k parts kam hain but is a class apart..
power steerin n all shaska///...classic wud b khyber wid diggi
n abt thermosta,go for kabli..genuine cultus t-stat is worth 6000 frm suzuki..
bteer find kabli in good condition n install it,ive chinese one ryt now but not satisfied..thinkin to go for kabli one..
WAHEED autos in chah sultan has kabbli ones n gives at 200,but chk kr laina if it works fine or not,,waheed is good n he will exchange t-stat if it didnt work fine>..

[speedster_101]

kia classic ive heard is even worse in pick than khyber..

Khyber's pick is not worse.
It has the best pick in 1000cc stock cars.

[Xplorer]

@cracked
What problem Chinese thermostat is giving? engine is still running cold or occasional overheating?

[cracked]

xplorer.
yup man,i knw khyber is good in pick n all..but i was talkin abt classic being 1300 cc,tou kia faida kyber sale kr k classic lainy ka
n abt chinese thermostat,prob is its temp is dfrnt than noral.mean it opens earlier than genuine t-stat..
like in half way of temp needle,it opens full but the auto fan dont kicks in...fan kicks in at half temp gauge..
but its good as t-stat warms up car quickly,lik in 2-3 minutes,car is good to go...prob is wen car reaches at full half way temp gauge,t-stat myt b full open inside engine n it wont b closing till temp falls to 25% of temp gauge..
thts y im thinkin to get it changed next wiinter..in summers,it will work just fine....

[speedster_101]

My Khyber's bonnet rod does not remain at its position when the bonnet is down because the part which holds it, has become loose. Due to this the metal rod touches the metal body of the car and produce very bad annoying noise. Any ideas how to solve this issue?

[Xulfiqar]

the plastic piece is not that expensive.

[speedster_101]

the plastic piece is not that expensive.

Yes I know that it is not that expensive but it is not available anywhere. I visited Waseem Autos and Kiyani autos. Both these shops are famous for Suzuki parts in Rawalpindi/Islamabad. But that plastic part was not available there.

[Xulfiqar]

I can usually buy it a corner parts store in the neighborhood

[fas133]

My Khyber's bonnet rod does not remain at its position when the bonnet is down because the part which holds it, has become loose. Due to this the metal rod touches the metal body of the car and produce very bad annoying noise. Any ideas how to solve this issue?

I have wrapped nitto tape on the rod to increase it's thicness and then it fits tightly in the hook.Try it.

[speedster_101]

I have wrapped nitto tape on the rod to increase it's thicness and then it fits tightly in the hook.Try it.

Already tried it
The grip becomes more loose in this way as the plastic part opens its face and can not hold the rod for more than one second.

[speedster_101]

Today, luckily I have found that plastic part which holds the bonnet rod, and its a perfect fit.
As mentioned by Xulfiqar, I found that part at a very small corner type shop near my house.

[Drug_Mafia]

@all
can an msd be installed in khyber on stock engine?
have following mods currently
1 plugs bpr5egp
2 plug wires 10mm r-spec
3 intake
4 indus 1.6 coil

[Xplorer]

^^^msd?

[smijaz]

^^^msd?

+1 :s