Suggesstions required For Khyber

Tags: #<Tag:0x00000006e84120>

Drug_Mafia (Drug_Mafia) 2011-01-30 07:48:56 +0500 #61

shld i remove the sound box whihc is in between the free flow and keep the exhaust orignal.........

Drug_Mafia (Drug_Mafia) 2011-01-30 11:14:50 +0500 #62

@all
my car is not starting now..
nither on petrol nor on cng after free flow...
at the time when car was in shop it was good but now its not starting.......

Drug_Mafia (Drug_Mafia) 2011-01-30 15:53:54 +0500 #63

bump

smartdevil_striker (smartdevil_striker) 2011-01-30 16:12:55 +0500 #64

Gud.. Can u Please tell me Whats da location of Yr Electrician? How much U spend on it??

jz (jz) 2011-01-31 05:57:40 +0500 #65

dont remove the sound box,else sound is gona be bad n v v loud,if loudnes isnt a problem,try it without the soundbox
starting issue shdnt b there due to piping

Drug_Mafia (Drug_Mafia) 2011-01-31 07:01:05 +0500 #66

@all
Recieved the shipment today
Thanx to JZ
Bas due to some circumtances i will be installing the stuff tomorow Inshallah

@jz
Thanx alot dude
and yes i went to the shop in the morning removed the soundbox and checkd the sound was too much got it installed again lolzz

Went to mechanic he came over my house and check the prob was only due to pushing the pedal alot
the car was ok in few minutes...
had a run on petrol and i must say too much noticeble picup..... just with free flow
hope after installing the stuff will get much power........

Attaching pics

Drug_Mafia (Drug_Mafia) 2011-01-31 07:04:15 +0500 #67

Cost was arround 1200rs as i got LED all over in the dash too i mean inside the ac pannel....
headlamp buttons etc etc
His name is Akber sit in saddar near United Bakery or hotel paradise...

harris4139mq (harris4139mq) 2011-01-31 07:27:48 +0500 #68

@drug mafia....dude if possible try to capture the installation steps of ur simota intake thanks!!!

Drug_Mafia (Drug_Mafia) 2011-01-31 07:33:12 +0500 #69

sure i will

wrangler79 (wrangler79) 2011-01-31 12:18:30 +0500 #70

@Drug_mafia
Nice pics.
Can you tell me about the company of these plug wires?
And shouldn't they be 4 in number?
(3 wires from distributor to sparking plugs and 1 wire from distributor to coil)

Drug_Mafia (Drug_Mafia) 2011-01-31 12:33:42 +0500 #71

they are R-Spec wires
and yes they are 4 in number forgot to put the 4 one in line lolzz
sorry me

wrangler79 (wrangler79) 2011-01-31 12:35:49 +0500 #72

These plug wires seems good to me. Are they Japanese?
Also tell me their price.

aantherax (aantherax) 2011-01-31 12:39:06 +0500 #73

i am not into mods and all but what i like the most in the pics what you did for the sound proofing underlay in the whole floor and foam in doors after that i am sure its much more sound less to drive (Y) ... and loved your car underneath as well excellently well kept beauty (Y)

Elien (Elien) 2011-01-31 12:39:44 +0500 #74

congratz drug mafia and good luck for tommoroow and please do tell us does it fit on stock ventury or after market like naxun...

@ wrangler79
the wires are R spec company

Drug_Mafia (Drug_Mafia) 2011-01-31 14:07:50 +0500 #75

thanxx alot for apreciating yes there is too much difference though i also got smthing els for doors that is i pasted rubber all over the door(corners or frame of door) so the closing of door is much similar to city's and rolla's lolzz there is stilll 1 more diy to go
will post the pics of that too Inshallah

Drug_Mafia (Drug_Mafia) 2011-01-31 14:09:55 +0500 #76

yes as per Jz these are orignals and i got them for 1800 (4 wires)

Drug_Mafia (Drug_Mafia) 2011-01-31 14:13:05 +0500 #77

thanx alot dude
and yes it will fit the ventury as the 1 i got is aftermarket as khyber doesnt come FF cng so i got it installed and i wont need to chnge the ventury.....
thoigh the orignals Suzuki kit coming in alto,cultus needs to chnage the ventury inorder to replace it with intake.........

Drug_Mafia (Drug_Mafia) 2011-01-31 15:33:53 +0500 #78

the size of the intake outlet for oil filter pipe

the oilfilter pipe attached to the airfilter (OEM)

the problem is that the oilfilter pipe is rubber made and easily bendable if i buy an extention thts biiger frm oilfilter pipe and the intake outlet pipe it will fit the intake outllet and easily fixable buy applying clamp tightly..
but if i apply clamp on the oilfilter pipe and tight the clam it will press it.......

Drug_Mafia (Drug_Mafia) 2011-01-31 15:57:53 +0500 #79

@Jz
problem solved got a brilliant idea......
lolz was just looking at both the pipes and suddenly an idea striked in my mind

danial0047 (danial0047) 2011-01-31 16:49:41 +0500 #80

Mod Edit: No off topic replies please.Thank you.