Suzuki Alto Owners/fan club

[safe_rider]

hi all. Can any body tell why there is a little hump in the middle of the car floor. I guess that was for rear wheel drive cars and Alto is not a rear wheel.

[Hassan1991]

For exhaust...RWD cars have greater hump

[safe_rider]

Thanks Hassan.

[ribbyun]

Can any brother tell where to get Alto tuned up for carburator settings as it giving jerks due to kachra in petrol or carburator. tried all tricks but no success

Can any brother tell where to get Alto tuned up for carburator settings as it giving jerks due to kachra in petrol or carburator. tried all tricks but no success

[ribbyun]

Can any brother tell where to get Alto tuned up for carburator settings as it giving jerks due to kachra in petrol or carburator. tried all tricks but no success

Can any brother tell where to get Alto tuned up for carburator settings as it giving jerks due to kachra in petrol or carburator. tried all tricks but no success

anyone,,,please

[mani9999]

This post was flagged by the community and is temporarily hidden.

[mehrozniazi1]

no not just for RWD..exhaust pipes n chassis strength as well ..but new automobile have come with better solution ...now we hrdly see FWD cars coming with them ..

[pwuser151665575830]

I got my alto 2007 carb fixed by kamran at shafiq mor he did a good job now my car is in smooth condition and petrol average is good aswell!

[pwuser151665575830]

check your clutch and pressure plates!

[pwuser151811531833]

Hi

Hiiii I am new to the community...

[pwuser151811531833]

Can I use Maximus 200w Hid in my Alto 2012????

[biloo]

Yes, you can . You'd also be blinding innocent people on the road.

[amaarali]

Hehe well on a serious note i think u shouldnt install aftermarket hids in ur car.try to keep it in stock condition and if something happens to original bulbs then replace with company recommended bulb.first thing is tht hids can create issues fr other people and second thing is hids do put extra load on wires hence chances of wire malfunction increases and third aftermarket hids are not reliable .else its ur ride

[pwuser151915661678]

can you tell The Shop Name? plz

[safe_rider]

One of my Suzuki Alto vxr original BWL steel wheel is bend since a long time. I want to change all the wheels but not with alloys.

Kindly anybody tell which 12" Japanese steel wheels can be installed. Kindly also tell minimum and maximum price that I should pay.

[saboor73]

One of my Suzuki Alto vxr original BWL steel wheel is bend since a long time. I want to change all the wheels but not with alloys.

Kindly anybody tell which 12" Japanese steel wheels can be installed. Kindly also tell minimum and maximum price that I should pay.

Suzuki every kabli rims

[safe_rider]

Thanks brother as your usual support in the past. Kindly tell will I easily get from Sutan ka Khoo.
Kindly also tell a good price range and how can I check for bent wheel without installing and driving.

[saboor73]

Thanks brother as your usual support in the past. Kindly tell will I easily get from Sutan ka Khoo.
Kindly also tell a good price range and how can I check for bent wheel without installing and driving.

Rims will be easily available
Shouldnt be more than 200-250per rim I guess
A visual inspections is usually enough to see if rim are bent or anything

[hassantahir2]

Shouldnt be more than 200-250per rim I guess

In Faisalabad they are selling scratchless condition 12 inch steel rims for 1000-1200/-RS per rim. The one's in normal condition are being sold for 600-800/-RS.

[saboor73]

Shouldnt be more than 200-250per rim I guess

In Faisalabad they are selling scratchless condition 12 inch steel rims for 1000-1200/-RS per rim. The one's in normal condition are being sold for 600-800/-RS.

new is cheaper than these