Suzuki GS150 : Black Swan

[SyedMoazzam]

about 1300/-

it might be on high beam but not that much. but low beam is very focused on ground.

Ok thanks and nice DIY

[angel82]

If i am right you changed the head light to CD 100 one right? i mean housing etc. CD 100 and RP have same head light housing. So if i put this Orsam in RP i'll get the same focus right? My low beam is fine but high beam is bit more high
is it 55 watts? did u install 2 relays? how did you install them i mean in what sequence?

[bilalayub919]

If i am right you changed the head light to CD 100 one right? i mean housing etc. CD 100 and RP have same head light housing. So if i put this Orsam in RP i'll get the same focus right? My low beam is fine but high beam is bit more high
is it 55 watts? did u install 2 relays? how did you install them i mean in what sequence?

The housing is stock because it was not much hard to cut thin plastic.

Yes. It would be more focused.

Yes. 55/60 watts.

Yes. 2 relays.

The forum link I posted in the update boasts a procedure that I followed. You can see it there also. It has all the parts and guides.

sent from Mars via International Space Station.

[archon2001]

This post was flagged by the community and is temporarily hidden.

[abdul.moeez91]

mashAAllah drive safely bro

[qazifaraz]

Bilal, I have a question regarding engine oil, please tell us about your expirience with LM and also with ZIC 10-40. Which oil is better to use in GS. I have GS with 3000 KM on clock, I used ZIC but it incresed the tappet noise and machenic said that it is due to ZIC so change oil brand in Future. Should I go for LM now?

[shirazkhan]

@qazifaraz

Brother please make sure that what ever brand you get is from an authenticated source because fake oils can destroy your engine.

Where as many oil brands have very minor changes in their characteristics.

I suggest you to try sources like Cash & Carries, Petrol Pumps or Authorized Dealers

Best of luck

[myzuki]

Salaam, zic 4t 10/40 is a good engine oil, I prefer to use it against 20/50 even valvoline I tried, no doubt a little noise is there but the ride is light. Not goes too black even after fast riding like racing till 1.2k km which is a good sign of synthetic oil. In gs150

[angel82]

@bilalayub919 clear you inbox please. Unable to send you a PM.

[LEDLIGHTMAKERZ]

Asalam O Alikum PW Members.

After the quest of finding a bike for personal use, over a month spent in constant questions, I purchased a Suzuki GS150 today. Bike is Alhumdulliah good in running. Had a few minor queries for which mechanic is not available at the moment. Invoice price was 114500/- but I got it in 115000/- PKR from Suzuki Mangla Motors.

Looking forward to the ride and a prayer to Almighty Allah for a safe and present experience. Ameen.

UPDATE APRIL 12th, 2014
- Got my licence seized by city police
- 250 kms on the dial

- got indicator lights changed to Honda deluxe 2014 style. 360 rs for 4 lights from honda dealer.

UPDATE APRIL 17th, 2014
- Motorbike is now registered with Islamabad Number!

MASHALLAH bro nicely kept. Have a look at what i did for a customers GS150

[jadoon1992_vxlimited]

MASHALLAH bro nicely kept. Have a look at what i did for a customers GS150

i guess this light is of @ahsan95's gs

[bilalayub919]

Sorry Brothers, was absent due to Terminal papers.

sent from Mars via International Space Station.

[bilalayub919]

LM was also a good oil. Actually I am trying different oils at the moment. I have clocked 1700 and a oil change is due. Without a doubt, high grade oil decrease engine noise like LM. Zic is softer oil and makes more noise and engine growls. LM was good but my drain interval was about 500 and oil was black as hell. Dunno what happend there.

sent from Mars via International Space Station.

[bilalayub919]

@bilalayub919 clear you inbox please. Unable to send you a PM.

Its done, do send please.

sent from Mars via International Space Station.

[bilalayub919]

@qazifaraz

Brother please make sure that what ever brand you get is from an authenticated source because fake oils can destroy your engine.

Where as many oil brands have very minor changes in their characteristics.

I suggest you to try sources like Cash & Carries, Petrol Pumps or Authorized Dealers

Best of luck

Sure bro. Thank you for the guide.

sent from Mars via International Space Station.

[bilalayub919]

U are welcome. I hope u are satisfied with the results u are getting.

Sent from my HUAWEI G700-U10 using PW Forums mobile app

Thank you so so much. I am quite satisfied with the result. Alhumdulliah

sent from Mars via International Space Station.

[bilalayub919]

Platinum NGK plug installed. No change at the moment because oil change is due. Will post review soon Insha Allah.

sent from Mars via International Space Station.

[bilalayub919]

TO ALL MEMBERS:

An issue i am facing is with the rims. I got them aligned about 3 times but still they tend to deform. Especially rear one. Ride is wobbly. A lot of vibrations and a sense that in a turn, the bike will skid or loose control. As 'bike ki back side maar jaye gi'.

Any guide about that?

sent from Mars via International Space Station.

[abobobilly]

@bilalayub919! Kindly read this thread: https://www.pakwheels.com/forums/bikes-3-wheelers/234277-aftermarket-rims-cg125-araya-vs-union

This doesn't just apply to CG125, but this is a common problem faced by ALL the new bikes in Pakistan.

[bilalayub919]

@bilalayub919! Kindly read this thread: https://www.pakwheels.com/forums/bikes-3-wheelers/234277-aftermarket-rims-cg125-araya-vs-union

This doesn't just apply to CG125, but this is a common problem faced by ALL the new bikes in Pakistan.

Bro, that is valid but the back rim is already changed. Still having this issue. I.will.try one.final.time.again.

Its Sumo 18x2.15 aftermarket, bought is quite expensive for about 2400/-

sent from Mars via International Space Station.