Yar these are connected with parking lights, so from parking light button, you can switch them on and off.
Hi guys,
I have khyber 97. Here are few pictures:
@mr 1derful
can u please tell me the price of these (tubeless - i am sure) tyres, along with the shop address? thank you.
https://www.pakwheels.com/forumreply_az_TopicID!107068~ForumID!30~pw.htmlsee this thread a realy nice khyber i thought i post it here
Sohni gadddiii..
except wheel covers
hi all i like this thread very much and here r some pics of my khyber. these r around 4-5 months old pics, and the only change i made now is that i have installed dunlop 165 tyres in it.
[highlight]
@hannan84, bro i thought alot on the procedure u have written about how to make LED'S.. but i didnt picked it up, coz i dont know that wat r ohm resistors?.. wat is a duct?..etc.. in short pls list me the name of things that i need to buy from spare parts shop, and how much quantity of that thing. and pls use names of things that i pronounce to the shopkeeper to give me. thxx
[/highlight]
@hannan
good work
@khurramzaman
yes they r tubeless!
each tyre costs Rs.2600/-
shop name is Pak Punjab Tyre, Nila Gumbad
the shop is on the opposite side of road of the church!
@rozzz
Thanks Mate.
@Zuhaq
Call me at 032-5169725. I will explain you the procedure
I have seen your car, and the front grill too. I dont think the LEDs will look better on this Grill. It will look bad, i would rather advise you to install neon rod as installed by rozzz. Pink ROD would suite your car.
Correction in moile number
03210-5169725
My keyboard's 1 button is somewhat out of order.
nice car compare to cultus
@hannan84, thx bro for ur advice... pls tell me how much a neon rod costs... and how much rods i need to install, i mean 1 or 2..??.. and how much 1 rod costs..
BROTHER I ALSO WNT TO INSTALL LEDS AS
NEONS CAUSE THERE ARE REALLY CHEAP
I WANT FOLLOW INFORMATION:
1.
RESISTANCE VALUE
(WILL 10 OHM B FINE)
2.INSULATION (FROM WATER)
3.WIRING
HERE R DA PICS
PLZ PLZ HELP ME
@zuhaq
Brother 1 rod would be sufficient in the front grill. The cost of rod is 500Rs.
@sheazi.
Good going buddy. I am posting a picture of the duct for water protection, you need to make holes in it by the screw driver by making the hot the tip of the driver. And you dont need to have resistors, just connect them in series and seal the duct by silicon. Here is the pic of duct
@hannan84, thx for the info bro..!!
Here is my Khyber 1999 model. bumper to bumper orignal, Mashallah
MASHALLAH
Here is mine. 97 model. Genuine Condition.
