Suzuki Kyber/Swift Owners & Fan Club

[mehrozniazi1]

I am new to khyber,
Just changed the oil and got Zic A+ 3 litre in my khyb 95. I dont know if 3L is enough for khyber or it must be 3.5?

If 3 is not enough then what should i do now, can I buy 1 liter of some other oil and mix it or will that do any harm? (as i think zic A+ wont be availble in 1 L).

3 or 3.25 is good...u using zic A plus which is synthetic oil..batter u use mineral oil

[mehrozniazi1]

@all

now i dont have CNG in my car...and just a free tyre in trunk....

is there anything with which i can tight down my tyre ...cuz i fear on heavy brake on in case of a accident tyre can reach upto front tyre and can do more damage to me

[Zeejigs]

@rozz ....yar have u seen a lock in the trunks of corolla???there is a big screw which can be tightened by hand,it locks the tire perfectly!

[daniyalahmad]

@all

now i dont have CNG in my car...and just a free tyre in trunk....

is there anything with which i can tight down my tyre ...cuz i fear on heavy brake on in case of a accident tyre can reach upto front tyre and can do more damage to me

There is a screw which can be tightened with hand,
it is used to tighten the spare wheel with the trunk base
comes with the car but I,m sure you can easily get one
I will Inshallah get some pictures for you tommorow so that you can get an idea

[mehrozniazi1]

@zeejigs

thz bro

@daniyal
m waiting for the pics

[daniyalahmad]

Here You go,

I hope this helps

[mehrozniazi1]

Here You go,

I hope this helps

got this..per tyre ka nicha kis cheez sa attach hota ha...i dont anything under the tyre

take a pic of that as well

[daniyalahmad]

^ there is a screw type thing
the mount under which jack is placed
btw I will get a picture of that aswell tomorrow Inshallah

[daniyalahmad]

here are some more pictures Mehroz Bhai
the place beneath the spare tyre with the tyre removed

View-1

Closer View with the jack in place


Side View

Side View

The screw gets tightened in the place visible

[asad_scorpio21]

hi to all khyber lovers
i some time observe when see khyber's shape from behind and noticed all models (89-2000) are not 100% same. there is a little bit difference (unees bees ka faraq)some model's shapes looks wider(attractive) from behind. is that right or my doubt is wrong.

[Zeejigs]

hi!hope every body is doin good!i want to overhaul my khybers engine!i want its engine to be in a perfect condition so i want to know that which workshop will be the best for overhauling in pindi/isb??and what will be the approximate cost in overhauling?? thanx

[jaxter]

HIYA PEOPLE i hAVE BOUGHT MY FIRST CAR......WHICH IS OFCOURSE KHYBER...I WILL BE UPLOADING THE PICS SOON ITS AT THE DENTARs SHOP .........

[asad_scorpio21]

@khyber experts
my query is still un-answered

[daniyalahmad]

hi to all khyber lovers
i some time observe when see khyber's shape from behind and noticed all models (89-2000) are not 100% same. there is a little bit difference (unees bees ka faraq)some model's shapes looks wider(attractive) from behind. is that right or my doubt is wrong.

Hmmm
Maine kabhi ghaur nahi kiya
btw front looks a bit different because of the difference in the front grill
back se kabhi ghaur nahi kiya
I will try to notice it

hi!hope every body is doin good!i want to overhaul my khybers engine!i want its engine to be in a perfect condition so i want to know that which workshop will be the best for overhauling in pindi/isb??and what will be the approximate cost in overhauling?? thanx

By Overhaul what do you mean?
what problems are you facing right now with the engine?

HIYA PEOPLE i hAVE BOUGHT MY FIRST CAR......WHICH IS OFCOURSE KHYBER...I WILL BE UPLOADING THE PICS SOON ITS AT THE DENTARs SHOP .........

Bohat Bohat Mubarak ho
waitng for pictures from your side

[wrangler79]

hi to all khyber lovers
i some time observe when see khyber's shape from behind and noticed all models (89-2000) are not 100% same. there is a little bit difference (unees bees ka faraq)some model's shapes looks wider(attractive) from behind. is that right or my doubt is wrong.

The very earlier Japanese Models (87,88 etc) were a little bit different from rear. Rest all are same (More beautiful shape).

[accord7362]

dainyal yar your khyber's dijee look's so clean and neat do post pic's of your ride
I'm a big fan od Khyber I owned1 way back in 99-2000

[wrangler79]

hi!hope every body is doin good!i want to overhaul my khybers engine!i want its engine to be in a perfect condition so i want to know that which workshop will be the best for overhauling in pindi/isb??and what will be the approximate cost in overhauling?? thanx

I overhauled my Khyber's engine in Nov 2008. It costed me 22K Rs. The mechanic overhauled it nicely but the seals started leaking quite early like chamber seal, tappet cover seal etc. He said its not my fault, the seals were not original, although at the time of buying he assured me that every spare part is original. We bought the parts from Sana Autos Saddar Rawalpindi.

Also, he stole 15 liters of petrol from my Car's tank, when it was parked in his garage. Although I gave him 500 Rs for petrol for washing car's engine and its parts.

All the mechanics are like that. So keep these things in your mind.

[asad_scorpio21]

Hmmm
Maine kabhi ghaur nahi kiya
btw front looks a bit different because of the difference in the front grill
back se kabhi ghaur nahi kiya
I will try to notice it

pehlay mujhay shak tha kay shaid meri dekhnay men ghalti hai magar confirm tab howa jab men nay AIOU (University) ki parking men 2 khyber ikathi sath khari howi dekhi , aur back side say observe kia to mujhey laga kay thora bohot faraq zaroor hai , any way lets see wat other experts say,

[daniyalahmad]

dainyal yar your khyber's dijee look's so clean and neat do post pic's of your ride
I'm a big fan od Khyber I owned1 way back in 99-2000

Thanks Alot Mate
I will Inshallah take some pictures as soon as I get some free time

pehlay mujhay shak tha kay shaid meri dekhnay men ghalti hai magar confirm tab howa jab men nay AIOU (University) ki parking men 2 khyber ikathi sath khari howi dekhi , aur back side say observe kia to mujhey laga kay thora bohot faraq zaroor hai , any way lets see wat other experts say,

If you are reffering to the difference in the place of rear "Registration Plate" then those were the early models of Khyber (SA-310)
those were Japan assembled and were having a more stronger built then local assembled cars but the thing they lacked were the looks

[asad_scorpio21]

Thanks Alot Mate
I will Inshallah take some pictures as soon as I get some free time

If you are reffering to the difference in the place of rear "Registration Plate" then those were the early models of Khyber (SA-310)
those were Japan assembled and were having a more stronger built then local assembled cars but the thing they lacked were the looks

look at the picture, white is latest model(97-98) and black is early model 89-91 , can u feel the difference, latest shape is more attractive.