Suzuki Kyber/Swift Owners & Fan Club

Tags: #<Tag:0x007f1bd373a7d0>

smijaz (smijaz) 2010-08-09 08:40:29 +0500 #1101

near to where upper radiator hosepipe connects under the carburetor. its a small copper bolt with a single connector on top.
hope you got it :S

Xplorer (Junaid Hassan) 2010-08-09 08:58:26 +0500 #1102

@smijaz
Thanks.
I think it is difficult to approach.

mehrozniazi1 (Mehroz Khan Niazi) 2010-08-09 09:14:00 +0500 #1103

done

smijaz (smijaz) 2010-08-09 14:37:09 +0500 #1104

welcome... may i ask the reason to approach the temp sensor ? may be i could help

Xplorer (Junaid Hassan) 2010-08-10 01:37:55 +0500 #1105

@smijaz
Actually my temp gauge was not working. However I located the sensor as per your guidelines, its wire was removed, I connected it and the gauge is fine now.

pakrider (pakrider) 2010-08-10 07:31:15 +0500 #1106

Mehroooz

In your "project suzuki khyber", what you have done with dash-board, is it painted or anything else, and did u do it all yourself or from any workshop, please share the detail, i want to make up the interior of my khyber.

Zeejigs (Zeejigs) 2010-08-10 07:47:21 +0500 #1107

^^yar he wrapped his dashboard in leather!and the workshop where he got this work done is opposite to the pizza hut in rawalpindi.there is a small lane where you can easily found the upholstery guy.

umair000 (umair000) 2010-08-10 07:49:17 +0500 #1108

^^he got it done from f 11 i guess

pakrider (pakrider) 2010-08-10 08:01:48 +0500 #1109

well thanx, and if i m not wrong, pizza hut is in Sadar near KFC. please tell if u know the name of the guy.

Zeejigs (Zeejigs) 2010-08-10 08:14:34 +0500 #1110

^^bro i dont know the name of that guy but pizza hut is near kfc in saddar.

pakrider (pakrider) 2010-08-10 08:24:30 +0500 #1111

and what about Umair's saying.....

pakrider (pakrider) 2010-08-10 08:37:31 +0500 #1112

Can any one tell me the cost of replacing the clutch new one and original.

mehrozniazi1 (Mehroz Khan Niazi) 2010-08-10 08:49:07 +0500 #1113

zeejigs..is right..got it done sadder

there is a street infront of pizza hut plaza or you can say it street between 2 front buildings ...there is only 1 guy who works there

or you can get it done from any other guy 2...its not very difficult....it costed me 3k

mehrozniazi1 (Mehroz Khan Niazi) 2010-08-10 08:50:53 +0500 #1114

last time i got the original 1s...clutc and pressure plate both costed 3800 with cltuch bearing...the orignal 1

dont go for the local 1s....they have evry short life......and dont work well....

price differance is around 1000 rupees

just put them togather and you can see the differance yourself

pakrider (pakrider) 2010-08-10 09:42:59 +0500 #1115

i have sent u msg in ur inbox, please reply in detail.

THNX

mehrozniazi1 (Mehroz Khan Niazi) 2010-08-10 10:02:17 +0500 #1116

done bro

Zeejigs (Zeejigs) 2010-08-11 08:40:37 +0500 #1117

guys clutch plate and pressure plate of khyber now costs above 5k!!!i recently overhauled my cars engine so i quoted the price!i bought the original stuff from waseem autos saddar rawalpindi.

fas133 (Farhan Ali Shah) 2010-08-12 14:42:13 +0500 #1118

Complete Workshop manual for Khyber
https://docs.google.com/leaf?id=0B9TYRt5w8bE9NzRiMTYxMWItZTE0MS00YjVmLWJjODEtNDk2NjgyMjdhZWQy&hl=en&authkey=CIDXq-cF

Xplorer (Junaid Hassan) 2010-08-13 03:37:10 +0500 #1119

@fas133
This is a supplimentary service manual for SA413 GTi and GXi models. There are many differences of sa413 with khyber, like this manual is for DOHC 1298cc Fuel Injected engine with a lot of engine sensors and ECM.
However body parts and interior are almost same.
Actually Khyber is SA310. Pls share its service manual, if you have.

ibad123 (Ibad Awan) 2010-08-13 12:23:20 +0500 #1120

truly a nice ride !!