Suzuki sj410 4age silvertop swap

[kenblock3]

bdw it loks cool....in white paint

[kenblock3]

send me ur pic maybe i know u

[kenblock3]

bdw wot abt dohc m16 swift sports head with m18 pistons ??? but if do port polish it will get heat up more

[kenblock3]

thn need a thermal layer rap sheet on it

[kenblock3]

i forget m16 swift sport version pistons r forged n light wieght n produce more torque from 4600rpm till max at 6800rpm

[kenblock3]

n produce 138 bhp

[Abdul_Hannan]

Great informTion..... thnkx alot
bdw awais is my younger brother
now its clean like stock from outside ....its now in family use...m shifted from drag to 4x4 .....
n where r u from

my pleasure! good to know that, bahawalpur/lahore

iz the that jeep which have 1500cc apv injectors n last size pistons in it ???

no. bone stock g13bb

[kenblock3]

its ecu is already chipped n tunned on high octane only thts the problem as well as good news....bwp mien hi octane b 2no milta hai

[Proverbial_Slang]

a COP setup is "Coil on Plug". Minor changes will need to be made in wiring to the coils and you will end up running 4 coils instead of 2.

[saboor73]

a COP setup is "Coil on Plug". Minor changes will need to be made in wiring to the coils and you will end up running 4 coils instead of 2.

why change coils why not just change coil wire to 8mm one?? the thicker wire will get less hotter I guess

[Proverbial_Slang]

why change coils why not just change coil wire to 8mm one?? the thicker wire will get less hotter I guess

Hebis concerned about heating coils, not wires. I'm actually planning to relicate my stock coils to where the CNG injector rail is. I will run longer wires to plug towers/boots.
The only thing I need to figure out is which plug boots to use which have the same height as Liana and seals the top of the plug cavity properly.

Sent using Curiosity's onboard communications sytem.

[kenblock3]

or i can get the bosh coils which cost 22k and add anti-spark solution on in ???

[kenblock3]

There is 1 election in my home town who said to meh he will convert it with toyota GLi coils and its more stronget than suzuki 1.... hmmm but m not sure his experiment will b pefect or nt

[saboor73]

There is 1 election in my home town who said to meh he will convert it with toyota GLi coils and its more stronget than suzuki 1.... hmmm but m not sure his experiment will b pefect or nt

have seen such setups the extra two coils will overload the ecu

[saboor73]

Hebis concerned about heating coils, not wires. I'm actually planning to relicate my stock coils to where the CNG injector rail is. I will run longer wires to plug towers/boots.
The only thing I need to figure out is which plug boots to use which have the same height as Liana and seals the top of the plug cavity properly.

Sent using Curiosity's onboard communications sytem.

good idea what will the under the coil for support ??

[kenblock3]

hmmmm ryte n bro 1 thing need to know r u from krachi???? saboor ??? ix thr any markets for engines ??? iz m16 swift sports engine will b available? where i can find the bosch coils ??? where i can get the iron man suspension (thr is 1 shop but i dun know i never came to krachi in my whole lyf)???
should i get the recaro bucket seats from dr ???? and offroading TOYO tires as well

[saboor73]

Hebis concerned about heating coils, not wires. I'm actually planning to relicate my stock coils to where the CNG injector rail is. I will run longer wires to plug towers/boots.
The only thing I need to figure out is which plug boots to use which have the same height as Liana and seals the top of the plug cavity properly.

Sent using Curiosity's onboard communications sytem.

I think his problem will be solve by changing wiring if you remember "waste sprak system" thread zulfiqar recommend not to use iridium or 4 tip plug and use manufacturer recommended plug the reason is plug have different heat range usign higher heat ranger plug will put load of coils of car

[kenblock3]

i think un proper tunning and putting wrong plugs makes it .... melt cuz an irandium plugs contain so much spark maybe the geniue plugs wires are under capacity to hold the power thts y they melt n my liana coils i always put an plantanium G power plugs in it but again aftr every 3 months coils melt ho jati thien. my ecu was of simple m16 liana sohc n engine was dohc n wiring didnt support the EGR sensor & oxygen sensor so they was fariq in engine lol....electrition said to meh they dun hv much purpose in running engine leave it as it iz it n wil not effect the performance ....hmmmm

[saboor73]

hmmmm ryte n bro 1 thing need to know r u from krachi???? saboor ??? ix thr any markets for engines ??? iz m16 swift sports engine will b available? where i can find the bosch coils ??? where i can get the iron man suspension (thr is 1 shop but i dun know i never came to krachi in my whole lyf)???
should i get the recaro bucket seats from dr ???? and offroading TOYO tires as well

yup shershah is market for engine in karachi m16a sport is pretty hard to find although m16a gti available that to rare bosch coil iron man suspesion have never see such stuff in any shop of karachi

[saboor73]

i think un proper tunning and putting wrong plugs makes it .... melt cuz an irandium plugs contain so much spark maybe the geniue plugs wires are under capacity to hold the power thts y they melt n my liana coils i always put an plantanium G power plugs in it but again aftr every 3 months coils melt ho jati thien. my ecu was of simple m16 liana sohc n engine was dohc n wiring didnt support the EGR sensor & oxygen sensor so they was fariq in engine lol....electrition said to meh they dun hv much purpose in running engine leave it as it iz it n wil not effect the performance ....hmmmm

ask the electrician that are manufacturer mad that they put o2 and erg sensor in car they effect perform both of them make sure that the burn with correct airfuel mixture to give optimum performance and there so no mseries engine with SOHC head mostly the frauds sell g series ecu with m series engine