Suzuki Swift Owners Club

[s_ruhail]

Deflating to 30psi? How much currently?

The Swift has a sporty drive. A hard suspension means better handling.
The downside is its uncomfortable on bumpy roads.
Get softer tyres and that should cure about 40% of the problem.
But the Swift was never meant to have a soft, comfy ride.

Sent from my GT-I9300

[Oblivion]

I have 33 in front tyres and 30 in the rear ones as written on the door panel. How much should it be kept on lahore roads?

[s_ruhail]

I don't know how Lahore roads are.
I drive on mostly smooth road with occasionally minor ups and downs, I keep 30.
If u have bad roads, keep 28.

Sent from my GT-I9300

[Sdogar]

I have 33 in front tyres and 30 in the rear ones as written on the door panel. How much should it be kept on lahore roads?

I think it is alright for Lahore roads unless you are in an area which has bumpy roads.

Sent from my GT-I9100 using Tapatalk 2

[yawar538]

Order these items from abroad for my Swift...

1. OBDII Bluetooth Car Diagnostics ELM-327

2. Car Electric Horn - Snail style (BOSCH)

Will be getting them in a few days and will share the results...

[Sdogar]

@yawar

Elm will not work on swift. If you can cancel the order do it,

Sent from my GT-I9100 using Tapatalk 2

[s_ruhail]

Sdogar is right. A member was recently selling these and they are reportedly not going to work on the Swift.

Also. Both these items are available here. Are u going to pay duties etc on these? Or is someone u know bringing them for you?

Lastly, please go to a good, reputed worker when u install horn. Most end up damaging your bumper clips.

Sent from my GT-I9300

[junaid_mir]

Order these items from abroad for my Swift...

1. OBDII Bluetooth Car Diagnostics ELM-327

2. Car Electric Horn - Snail style (BOSCH)

Will be getting them in a few days and will share the results...

this scannr would nt worked on swift i sell these sxanners nd i knw if anyne need letme knw my shipmnt of 100 piexes on the way to pakistan hve got sme issue that why delayd...nd u can get good horn in a price range of 900rs ...i am also using swift 12....

Sent from my GT-I9300 using Tapatalk 2

[sinnan]

Guys any one of you facing quick pressure drop in tyres.
My daily drive is very less. 4-5 km and I can visually feel few tyres having less pressure and when i went some is 22,24,28 like that
none of them stay 30/33. Should i get all tested / get that sticky solution between tyres and rims??

[yawar538]

@yawar

Elm will not work on swift. If you can cancel the order do it,

Sent from my GT-I9100 using Tapatalk 2

Already placed the order, will be reaching soon. Will try on other car and will then sell it off on PW if it doesnt work for me..

Sdogar is right. A member was recently selling these and they are reportedly not going to work on the Swift.

Also. Both these items are available here. Are u going to pay duties etc on these? Or is someone u know bringing them for you?

Lastly, please go to a good, reputed worker when u install horn. Most end up damaging your bumper clips.

Sent from my GT-I9300

Ummm no, no duties on them. They get shipped directy at home through AirMail. Will get it installed from Suzuki South only..

this scannr would nt worked on swift i sell these sxanners nd i knw if anyne need letme knw my shipmnt of 100 piexes on the way to pakistan hve got sme issue that why delayd...nd u can get good horn in a price range of 900rs ...i am also using swift 12....

Sent from my GT-I9300 using Tapatalk 2

Oh Well this horn is branded and costs around 2300-2500rs here. I got it for much cheaper, the 900rs ones are chinese ones..

Thankyou all for the notice. Will try it in Swift, City Aspire and Civic 2010. If not satisfied, will sell it then.

[BubyDuby007]

this scannr would nt worked on swift i sell these sxanners nd i knw if anyne need letme knw my shipmnt of 100 piexes on the way to pakistan hve got sme issue that why delayd...nd u can get good horn in a price range of 900rs ...i am also using swift 12....

Sent from my GT-I9300 using Tapatalk 2

what is this scanned for. Will it work on Belta??

[junaid_mir]

what is this scanned for. Will it work on Belta??

yes worked ...scanner to chexk engine ecu...check error nd clean error using it

Sent from my GT-I9300 using Tapatalk 2

[CutePoison]

Why doesnt this work?
I thought swift had a OBD-II port

[junaid_mir]

Why doesnt this work?
I thought swift had a OBD-II port

bcz suzuki pakistan is obdi nd this device nt worked on pakistani suzuki

Sent from my GT-I9300 using Tapatalk 2

[CutePoison]

bcz suzuki pakistan is obdi nd this device nt worked on pakistani suzuki

Sent from my GT-I9300 using Tapatalk 2

This is OBD-I connector

Whereas, this is OBD-II connector

Swift has this connector

[Sdogar]

@cutepoison

Which one is in swift? Obd 1 or two?

Sent from my GT-I9100 using Tapatalk 2

[CutePoison]

@cutepoison

Which one is in swift? Obd 1 or two?

Sent from my GT-I9100 using Tapatalk 2

Dont know, looks like OBD-II in the pic.
Thats why I asked

[yawar538]

My bluetooth em327 unit will be arriving within a week, its ready for shipment. Will try it then and post the links here. Will also check the port shape/size tomorrow in daylight and check if its OBDI or OBDII.

[junaid_mir]

swift protocl is different i have tryd the same device on my swift 2012...produxtn date septm.not worked on that tryed all the ways

Sent from my GT-I9300 using Tapatalk 2

[CutePoison]

My bluetooth em327 unit will be arriving within a week, its ready for shipment. Will try it then and post the links here. Will also check the port shape/size tomorrow in daylight and check if its OBDI or OBDII.

If fellow PW members are saying it doesnt works, then it doesnt work.
I posted the pic above, you can clearly see its an OBD-II port. Dont know why it doesnt work