The Drop Thread - Lowered rides

[vague_one]

Heck, forgot posting here......here we go

[Badpigs]

Heck, forgot posting here......here we go

oh bhains :o

usman bhai ye kab howa ? kiasey howa ?

[waleed911]

Hmm then try to get RS variant suspension for regular use , there were some variants that had coilovers pre-installed

ok, got it... but the thing is i know what i want, the problem is i dont know where to get it from... my budget is healthy and i want a good suspension... where will i get it?...

[vague_one]

oh bhains :o

usman bhai ye kab howa ? kiasey howa ?

sir yeh hua to coil overs par hai, air hua bhi kaafi arsay ka hai, buss I forgot there was a specific thread for this kind of lunacy!

[Waqar.]

that city looks mint!

[rohaansaeed]

Integra on lowering springs, City on Tanabe Sustec PRO coilovers

[Badpigs]

ok, got it... but the thing is i know what i want, the problem is i dont know where to get it from... my budget is healthy and i want a good suspension... where will i get it?...

Try places like Bilal gunj (lhr) , shoba (psh) and sultans (isl) etc etc - should get reasonable rates from such junkies

Integra on lowering springs, City on Tanabe Sustec PRO coilovers

Does the teggy nead alignment or its just the pic :S

And ur sx8 i know is sesky (H)

[rohaansaeed]

Does the teggy nead alignment or its just the pic :S

And ur sx8 i know is sesky (H)

Nope, it looks so because the steering wasn't straight at the time of the picture, other than that it was still on stock rear springs so yeah thus the weird angle
All leveled up now, will post a fresh picture in a while

[Badpigs]

I just wanted to give it an extreme drop this time but they just made 2 (worthless engineered) speed breakers sorry car breakers right in front of my house , one before and one after (due to the park and mosque)
Added KONIs without any drop , the car does not look that much dropped but trust me , it touches almost every speed bump it crosses
Ground clearance issues

[umer91]

can anyone tell me from where can i buy corolla 2012 lowering springs in isb/rwp and for how much ?
secondly wats the best drop size for a car to be lowered in pakistan,i mean how much inches it should be drop so that it can perform better and can be saved from speed bumps ??

[waleed911]

Try places like Bilal gunj (lhr) , shoba (psh) and sultans (isl) etc etc - should get reasonable rates from such junkies

Thanx man...

[Waqar.]

@badpigs
adding 17s might help the ground clearance issues but the car looks pretty decent as it is. nicely done, again!

[Badpigs]

@badpigs
adding 17s might help the ground clearance issues but the car looks pretty decent as it is. nicely done, again!

thnx bro , yaar actually 17's would've easily solved the problem but they are toooo big for ef , eg and ek look f9 with those
only solution was to get 17's with 40 profile which i dont prefer cuz its a daily runner

[rohaansaeed]

thnx bro , yaar actually 17's would've easily solved the problem but they are toooo big for ef , eg and ek look f9 with those
only solution was to get 17's with 40 profile which i dont prefer cuz its a daily runner

17 is an overkill for EF, I know since the sx8 and ef are basically the same cars. Even 16 is the max. Where exactly does the ground clearance issue come up, I mean does the exhaust pipe scrape against the surface or what?

[Badpigs]

17 is an overkill for EF, I know since the sx8 and ef are basically the same cars. Even 16 is the max. Where exactly does the ground clearance issue come up, I mean does the exhaust pipe scrape against the surface or what?

Yes , so far its only the exhaust cuz its NOT hooked properly due to the swap - will get it done while installing the exhaust
I wont be going for a further drop as roads are being re-constructed in every part of lahore , so far need to adjust the cambers , neutral at the front and negative at the rear cuz im using 205/50 for now

[AmmarSaleem]

check sultan di khoi pindi or peshawar they should have springs for your car

[AmmarSaleem]

can anyone tell me from where can i buy corolla 2012 lowering springs in isb/rwp and for how much ?

secondly wats the best drop size for a car to be lowered in pakistan,i mean how much inches it should be drop so that it can perform better and can be saved from speed bumps ??

[h=2][/h]

a 2inch drop in a corolla can save u from bumps umer bhai and the best way to lower ur car is to take your gf/wife shopping & on the way back your car & bank account both will sit really low

[Waqar.]

thnx bro , yaar actually 17's would've easily solved the problem but they are toooo big for ef , eg and ek look f9 with those
only solution was to get 17's with 40 profile which i dont prefer cuz its a daily runner

i disagree. 17s are too big for the eg and ek too lol

i need some help guys, i have rubbing issues at the rear, got the camber adjusted running slightly negative but even with one passenger at the back the tyres rub under hard cornering. no issues what so ever without any passengers though. is there any other option rather than rolling the fenders?
17 x 7.5 with 205/40/17 tyres

[a1ms]

i disagree. 17s are too big for the eg and ek too lol

i need some help guys, i have rubbing issues at the rear, got the camber adjusted running slightly negative but even with one passenger at the back the tyres rub under hard cornering. no issues what so ever without any passengers though. is there any other option rather than rolling the fenders?
17 x 7.5 with 205/40/17 tyres

ur main culprit is rim width which is 7.5jj get urself 6.5jj rims and you are good to go. rims width matters aot. i ve 2 rims 17s with me on one 17s my cars fender doesnot touches up with tyre wall even with 3 passengers at back and on other 17s my car even touch the side wall without even any passenger at back same tyre profile on both 205/45.17

[FarhanAnwarKhan]

Heck, forgot posting here......here we go

oh awesome...................