The Rxi (Revived)

[Skill]

I am not getting what deep dish looks like, do post some sample then I can look for that type and can appraise you about the details

Sent from my iPhone using Tapatalk

here is a refference pic,but the spokes of this rim are outwards,i wish the spokes inwardly bent.

[Skill]

Just got the new tyres of ,Nitto japan,185x70x14.

[memad]

Ok I got the idea will share the pics once I go to the market.

Sent from my iPhone using Tapatalk

[AsadGhumman]

I have one question guys. The RPM of my Cultus EFI reaches about the same figures on the same speed as shown in the pic. Now the question is, as I have heard that 1300 cc cars have the most economical speeds at about 100km/hr, is it true ?? while on the other hand, I have also heard that keeping the RPM to 2-2.5 is the most economical speed for any car...(which i restrict my Cultus to and get the mileage of up to 230 km on long route on in one CNG tank. Since it is a Cultus and CNG, so i seldom drive it on petrol :P)

now whats the reality folks, is it 2-2.5 RPM or is it 90-100 km/h (for 1300 cars) ??

Bhaiyaa 2.5/80-90Kmph is ideal but 1300 ya 1000 cc mei farq ye hai k Liana ko 3.0 ya 100km/h per b drive kro to fuel efficiency boht ziada effect nhii hoti... Yes thora sa farq parta hai bilkul nominal sa, not too much lekin 1000cc car mei fuel efficiency boht ziada effect hoti hai aur 110 ya 120 tak pohnch kr to bilkul hi fuel peena shuru kr deti hai especially agar load b ho to... 1300cc mei 120 tk koi khas farq nhii parta.. us se ooper phir mat poocho .. drive if u can afford coz 120 se ooper boht fuel khae gi

[AsadGhumman]

here is a refference pic,but the spokes of this rim are outwards,i wish the spokes inwardly bent.

I guess inward bent spokes are not good for suspension.... What I imagine is that during turns, they will transfer all the torque to the suspension i.e Axle & lower arms.. The outward bent Spokes actually divert the pressure outwards & above towards the shock absorbers thus preventing Axle & lower arm..... What do u think sir g ??????? :S

[Skill]

[..............

[Skill]

Rear balance rod bushes Oem Japan,changed lately.

[nomi700]

massive,
its 2.2k to 2.8k rpms for economy,and liana goes to 100 at 2.8k.

mine goes to 100 at 3k rmp and 120 at 3.5k rpm. would there be any issue??

[nomi700]

recently changed balance rod bushes with japanies brand.

what is the brand and price. i am also going to get it changed for my car.

also suggest some good bush brand and price for chimtaaas

[memad]

Went to one of big shop in Blue area. There was only the below design but it is too but it has 5 holes.

Also found one installed in the car. But I think U need more deep.

Sent from my iPhone using Tapatalk

[AsadGhumman]

recently changed balance rod bushes with japanies brand.

When should one change those bushings??? What are the symptoms of worn out balance rod bushes???

[Skill]

mine goes to 100 at 3k rmp and 120 at 3.5k rpm. would there be any issue??

No issue,its all about good tuning.

[Skill]

what is the brand and price. i am also going to get it changed for my car.

also suggest some good bush brand and price for chimtaaas

B/R bushes are ''genuine suzuki'' japanies,other may cost you 200 to 300,suspension bushes like chimta bushes are present in market with the brand ''fuji japan'', will cost you about 2k for all four bushes.
A whole chimta at 3s will cost you about 7k to 8k,qabli will be around 4 to 5k.
One more thing,Mechanics ofetn insists to change the whole assembly instead of thursting new bushes in older ones,but as i have recently done complete suspension work on my ride at 70k on the clock,though it was in situation that work might be extended a bit more for the replacements,replaced anyway.

[Skill]

Went to one of big shop in Blue area. There was only the below design but it is too but it has 5 holes.

Also found one installed in the car. But I think U need more deep.

Sent from my iPhone using Tapatalk

Thanks for the help,emad bhai.

[Skill]

When should one change those bushings??? What are the symptoms of worn out balance rod bushes???

For a pakistani manufactured car overmore a suzuki 80k is good for suspension,you will have to inspect the condition by an expert mechanic if you dont have knowhow about bushes.
The noise on bumps is an indication.

[ibadaslam872]

Stunning ride.MashAllah.

[memad]

Thank you memad(your kind name?),for the concern.
Well i want more deep and spokes should be inwardly bent.
For every one,my name is Aamir.

Yes Aamir these are the deepest I found in that shop will try to visit some other shops too.

My name is Muhammad Emad that is what my id is memad

In short you can call me Emad

Sent from my iPhone using Tapatalk

[nomi700]

Amir bhai, can you share some more details of your suspension work. parts (brand and price), labour etc. i will be going to get suspension work done soon. any advice??

[Skill]

Yes Aamir these are the deepest I found in that shop will try to visit some other shops too.

My name is Muhammad Emad that is what my id is memad

In short you can call me Emad

Sent from my iPhone using Tapatalk

Thank you for the efforts again,take it easy,i am not in any hurry untill i get my desired design.

[Skill]

Amir bhai, can you share some more details of your suspension work. parts (brand and price), labour etc. i will be going to get suspension work done soon. any advice??

Nomee i have already described it in liana owner fan club,but for you i wont hesitate to post it again here:)