Tips for Baleno

[tethyan]

Dear I've been facing the same problem for last six months. Even once my car stopped then I took wire clips of advancer and emulator and plugged in again it started working...the problem arizes sometime but a bit check with the wiring get it solved...nothing to worry about...

Keep going untill it goes...

Ok Thanks, but it was all ok till yesterday, this happened after drive in Raining, might be something short:(

[abbasi_faheem]

Ok Thanks, but it was all ok till yesterday, this happened after drive in Raining, might be something short:(

Dear baleno's wiring is very sensitive so I personally suggest keep calm and go on...local electricians are dying to experiment with it...so dont worry...keep going...I'm driving sor last six months and don't worry about occasional jurk once in a blue moon...

[tethyan]

Dear baleno's wiring is very sensitive so I personally suggest keep calm and go on...local electricians are dying to experiment with it...so dont worry...keep going...I'm driving sor last six months and don't worry about occasional jurk once in a blue moon...

Ok Thanks:)
you know its quite embarrassing and dangerous if you are going in fast lane 100-120 and your car got off;)

[abbasi_faheem]

It never happened with me when I go faster...than 40km/h...so u rather get the wiring checked...plz...for ur satisfaction...:-#

[tethyan]

Dear I've been facing the same problem for last six months. Even once my car stopped then I took wire clips of advancer and emulator and plugged in again it started working...the problem arizes sometime but a bit check with the wiring get it solved...nothing to worry about...

Keep going untill it goes...

Dear Al last the problem resolved, the culprit was Camshaft Sensor. Now the drive is back to ideal.
I suggest, you should also check this sensor;)

[anc]

Dear Al last the problem resolved, the culprit was Camshaft Sensor. Now the drive is back to ideal.
I suggest, you should also check this sensor;)

Good to hear that, how did you diagnose that it was camshaft sensor

[tethyan]

Good to hear that, how did you diagnose that it was camshaft sensor

Mechanic has technically checked through some cables, then it shows the code of the error, like check engine light was blinking 4-2
42 code shows that camshaft sensor is out of order:(

[anc]

Mechanic has technically checked through some cables, then it shows the code of the error, like check engine light was blinking 4-2
42 code shows that camshaft sensor is out of order:(

Did you buy a new one? Cost of sensor?

[tethyan]

Did you buy a new one? Cost of sensor?

Actually he had it in stock (Kapbli) 1,500 Rs.

[Ch.majid]

Actually he had it in stock (Kapbli) 1,500 Rs.

I bought brand new for 1200

[anc]

I bought brand new for 1200

This is what i also found. New one is cheap. But the kabli one's comes with warranty.

[MUNZALEEN]

the only problem in my baleno that i am facing since bought.
sada language mein samjhane ki koshish karta hun
jab kabhe 4 th gear se 3rd ya 2nd mein aao matlab speed kam ho gari jhatke laite hai jab tak k clutch na daba lo
meanwhile baghair acceleration dabai matlab 900 rpm per gari 2nd gear per buhat ziada jhatke laite hai or 1st per kabhe laite hai kabhe nai.es ka distributor or advancer dosnt know ts name the (black clip mounted with landirenzo kits clip) k pins aik do bar tight kiye hain mechanic ne or tie clip bhe lagaya per thore se behtri mehsos hue or kuch kilometers chalne k baad khatam
story of the car:
i bought this car 8 months ago.its 2005 sports.
after buying on first oil change suzuki guys only just setted its typets and new plugs and all oil seals from suzuki.from that day till i drove it 17000 kms never ever any tunning related thing is being done.but these jhatkes i remeber were from day one even after tunning but i never find time to find the reason.
know experts plz suggest
what things to whom i care about

[anc]

the only problem in my baleno that i am facing since bought.
sada language mein samjhane ki koshish karta hun
jab kabhe 4 th gear se 3rd ya 2nd mein aao matlab speed kam ho gari jhatke laite hai jab tak k clutch na daba lo
meanwhile baghair acceleration dabai matlab 900 rpm per gari 2nd gear per buhat ziada jhatke laite hai or 1st per kabhe laite hai kabhe nai.es ka distributor or advancer dosnt know ts name the (black clip mounted with landirenzo kits clip) k pins aik do bar tight kiye hain mechanic ne or tie clip bhe lagaya per thore se behtri mehsos hue or kuch kilometers chalne k baad khatam
story of the car:
i bought this car 8 months ago.its 2005 sports.
after buying on first oil change suzuki guys only just setted its typets and new plugs and all oil seals from suzuki.from that day till i drove it 17000 kms never ever any tunning related thing is being done.but these jhatkes i remeber were from day one even after tunning but i never find time to find the reason.
know experts plz suggest
what things to whom i care about

Does it happen on cng or also petrol? Is on slow speed you will have a higher Gear the car is bound to stutter.

[tethyan]

[QUOTE=MUNZALEEN;4975365]the only problem in my baleno that i am facing since bought.
sada language mein samjhane ki koshish karta hun
jab kabhe 4 th gear se 3rd ya 2nd mein aao matlab speed kam ho gari jhatke laite hai jab tak k clutch na daba lo
meanwhile baghair acceleration dabai matlab 900 rpm per gari 2nd gear per buhat ziada jhatke laite hai or 1st per kabhe laite hai kabhe nai.es ka distributor or advancer dosnt know ts name the (black clip mounted with landirenzo kits clip) k pins aik do bar tight kiye hain mechanic ne or tie clip bhe lagaya per thore se behtri mehsos hue or kuch kilometers chalne k baad khatam
story of the car:

Did you check the engine foundation (Thiyya)?? that can also one cause of it

[MUNZALEEN]

Does it happen on cng or also petrol? Is on slow speed you will have a higher Gear the car is bound to stutter.

yes on cng also and on higher gear also

[MUNZALEEN]

[QUOTE=MUNZALEEN;4975365]the only problem in my baleno that i am facing since bought.
sada language mein samjhane ki koshish karta hun
jab kabhe 4 th gear se 3rd ya 2nd mein aao matlab speed kam ho gari jhatke laite hai jab tak k clutch na daba lo
meanwhile baghair acceleration dabai matlab 900 rpm per gari 2nd gear per buhat ziada jhatke laite hai or 1st per kabhe laite hai kabhe nai.es ka distributor or advancer dosnt know ts name the (black clip mounted with landirenzo kits clip) k pins aik do bar tight kiye hain mechanic ne or tie clip bhe lagaya per thore se behtri mehsos hue or kuch kilometers chalne k baad khatam
story of the car:

Did you check the engine foundation (Thiyya)?? that can also one cause of it

yes foundations are also ok

[imranuh]

I have 1.3 baleno and last night I parked my car but when in morning I tried starting it, the engine cranks but it wont start. Battery is new and its maintenance free Hankook. Between all of this my car started only once then I thought it's all OK but after that same problem persists.

[saboor73]

I have 1.3 baleno and last night I parked my car but when in morning I tried starting it, the engine cranks but it wont start. Battery is new and its maintenance free Hankook. Between all of this my car started only nce then I thought it's all OK but after that same problem persists.

Any recent recent work done ? Timing belt chang or something what the check light status while car refuse to start ? Blinking or constant

[anc]

I have 1.3 baleno and last night I parked my car but when in morning I tried starting it, the engine cranks but it wont start. Battery is new and its maintenance free Hankook. Between all of this my car started only once then I thought it's all OK but after that same problem persists.

Check the crank sensor....

[imranuh]

Any recent recent work done ? Timing belt chang or something what the check light status while car refuse to start ? Blinking or constant

Nothing recent. Check engine light is constantly on. My mechanic said that my after market remote security system has malfunctioned that's why the car is refusing to start. I dont know how true is that because I removed the circuit box (big one) of the alarm system and same thing happened then I asked the mechanic again and he said you'll have to install a new system or rewire the ignition system to stock.

Check the crank sensor....

How do you do that?