Tips for Baleno

[muhammadzubair7]

e-hata mitho khan have a bunch of these, plus chah sultan glass factory road, but if u want some very clean piece on premium price try searching for carriage factory road opposite old afghan basti, there was once a shop selling a half cut of baleno with 1.6 auto tranny engine, and was asking arround 4 lacs for the whole half cut.

G13b is expensive because of less supply, engine can cost u around 85 thousand to 1 lac. depending on fankari of khan sb.
g-16 is comparatively cheap and have heared few guys replacing J18/or M18 as well.

these engines were in ample supply in Shoba -peshawar but now they are reduced in numbers because of less suply from torkahm and shifting trend to newer 1000cc or 660cc engines.

[brownrose78]

@ahmed_pak hmed_pak
Ghabraen Nahi. I think your car is running Rich Lean, High lean.

Fuel-air mixture ratio could be disturbed. Please get your car's scanning report first, then u will be able to diagnose at least 50% faults of your car by yourself

BTW when you did Tuning of your Baleno last time?

@abid110
Bhai jan, From where u r getting scanned your cars?

@ahmed_pak
If you are in Karachi, then u can visit AutoXperts or Moto2000. Both are near NIPA in Gulshan Block 5

[abid110]

i have my own scanner at home..

[naghmanbutt78]

kabli engine is expansive. what do you think about overhauling? further japani parts for overhauling is better or not as genuine parts are very expansive?

[muhammadzubair7]

Bro kabuli is good as long as u are geting a good piece out of junkyard...
Japanese parts are good if original... waseem autos have severe repute issue now adays. Try koh i noor and malik brothers as well.
Plus dont go to suzuki dealerships they loot and thats it. Plus balenos engine parts arr expensive my friend bought parts for 60 thousand all japanese parts for complete overhaul of engine pplus the labour and kharadiya labour as well.. for rebuild u ought to have an excellent kharadiya(machinist) or else dont do overhauling at all.

[ahmed_pak]

abid bhai can u check my car through ur scanner.

@brownrose78, kindly let me know the address of autoexpert or moto2000

[naghmanbutt78]

can you pl give cell number of your friend who overhaul baleno engine.

[dani_kk]

Easily available.
And economy will increase
Acceleration will increase
And low end will increase.

Ac+5 passengers in car, you'll feel amazing response.

[dani_kk]

These rebuilds don't work brother.
Lathe machines aren't accurate. Bores aren't accurate. Then gasket availability is short. You can get mls gasket according to your lathe size.

[dani_kk]

From saddar.i buy from 2-3 engine providers. And since I'm professional in this field. I find no issues choosing the right engines.
Alhamdulilah im known because of quality work.

J18a with gear is around 65k (purana dekar)
M18a with gear 70k(purana dekar)

G16b with gear 70k (purana dekar)

[naghmanbutt78]

waiting for your friend number who overhaul baleno engine

[naghmanbutt78]

waiting for the cell number of your friend who overhaul baleno engine

[naghmanbutt78]

price of g13 baleno engine?

[dani_kk]

Same price as g16

[abid110]

bro mera scanner baleno per nahi chalta is it is not OBD2. works on my Liana as its OBD2 compliant car.

[muhammadzubair7]

sent u in PM. check inbox. but as mentioned by Daniyal complete swap is better if ur engine is to be fully rebuild swap is preferred.

[ahmed_pak]

salam abid bhai, kindly let me know the address of autoexpert or anyother who accurate findings the fault and need to scan whole car. please advise

[NiGhTShAdE]

I am going for overhaul, will get my car back on Friday Inshallah. Will post the details once complete. Don't go for Geniune parts, the cost 2.5times the excellent Japenes ones, you can get 2 overhauls in that price and still able to save few bucks. In most cases japanese and geniune parts are manufactured by same manufactures for e.g If you buy Pistons of ART in ART box they will cost you 4250 and same ART pistons in Suzuki box cost 10000(yes suzuki used ART pistons in Baleno ).

[NiGhTShAdE]

Got estimates for Head Assembly before going for rebuild, G13BB is not available easily,.You have to go for G15 head assembly which costs 50K and 75K for full engine. At this cost going for swap makes no sense. Go for swap only if you get head assembly for around 20k like for Honda or if your engine is beyond restoration point like cracked block etc...
And btw unlike Honda, Suzuki engines availabe in junkyards are usually not in great shape so there is a very high probability that you may end up buying a bad Head Assembly for you Suzuki.

[NiGhTShAdE]

And btw it is utter crap if someone tell you he can tell you about condition of engine by just looking at it because he is an expert. They just gamble. If they will get you good engine, they will boast about their expertise and if turns out to be bad or rebuilt, they will simply say junkyard is just a chance, your luck. The only way to test engine is to do compression test with hot emgine and that is it. Even cold engine compression tests wont give you accurate results.
The warranty things is all just scam for selling, by the time you'll know your engine is bad you'll already be out of 2-3 weeks warranty that they give.