To All Experts: Cultus VXRI 2008 Overheating

[Runtimeerror]

Here are some more picturs want to share with all Brothers.

 <a href='https://www.pakwheels.com/forums/user/shereabdullah'>[B]I checked as ask "shereabdullah" [/B]</a>      [COLOR=#ff0000][SIZE=5]put ur radiator cap off and start  ur engine,,make sure that radiator is teemed with water,, now push the  accelerator,, if the water comes out on pushing the accelerator,, then  there can be two faults,,

1) radiator
2) gaskit,,[/SIZE][/COLOR]

There is no water come from radiator

[Runtimeerror]

I m near to solve my problem my self, Every thing related with Temperature controller was ok, there was a major fault but i solved with miner effort of my cultus.

Thanks help, to All Experts.

[SER_GTR]

What Was It...Share It With Everyone here

[Xulfiqar]

The ECM should kick the fan relay at this point.. btw this tool is fantastic to troubleshoot a number of problems.

[argtr65]

What Was It...Share It With Everyone here

This is called laser pyrometer,it usually uses to measure surface temperature.But its accuracy depends on distance at which temperature is taken.

[Runtimeerror]

Never Bypass your "ECT" Temperature Controller Sensor . Keep your Car Controller system in Default value.

will share How I remove ECT fault of my cultus later.

[SER_GTR]

This is called laser pyrometer,it usually uses to measure surface temperature.But its accuracy depends on distance at which temperature is taken.

I Was Actually Talking About The Problem He was Having And What He Encounter And How He Solve It...

Yes I Know Its Laser Type Temp Sensor Usually Used To Mesaure LINE Temperature And Using At Crucial Places Where Normal Thermometers Just Can't Work

[Runtimeerror]

Here is detail work to Remove the ECT fault.

As you know about ECT Controller work on resistance base, Temp sensor gives 5.74kohm @ 0C & 0.298 – 0.320 ohm @ 80C.
it means temperature effects on resistance. resistance effect on ECM by the flow of voltage 0-5vdc.
Low engine coolant temperature (High voltage-High resistance) 5vdc & 5.74kohm Resistance
High engine coolant temperature (Low voltage-Low resistance) 0vdc & 0.298 – 0.320 Resistance

My ECT controller was giving various resistance value to ECM.due to this various resistance value ECM was also not giving output voltage to radiator Fan Relay.

so i put a resistor 4.7kohm between two wire coming from ECT sensor to improve this various resistance value.
Now Temperature controller working perfectly & its response time is very fast.

Hope this will help you to understand.

Thanks again for help
Regard to All experts

[Runtimeerror]

Hi all experts is this ok? or it can be create any problem in future?

Comments Please

[mahmad786]

Hi all experts is this ok? or it can be create any problem in future?

Comments Please

By having a resistance in parallel you are effectively giving a wrong temperature value to your ECM. Like when the car will be cold your car computer will be reading some temperature as effective resistance of your thermistor and additional resistance would be roughly half the 5.7k which may result in bad choke when the car starts. You ca discuss it with me on Phone 0300 8465671 as i am also facing this issue but yet to find any solution

[ayan_cdkey]

This post was flagged by the community and is temporarily hidden.

[NiGhTShAdE]

Salaam, my czn's cultus efi 2008 heated up yesterday. We were quite distant from our home and workshop. So we had to carry the car to a nearby workshop. The mechanic identified a faulty stuck thermostat valve. So he removed the valve and removed the attached cable. This made the radiator fan work directly irrespective of the heat of the engine. Today we went to our own workshop and the waterbody had also jammed up. We had replaced the water body but the thermostat valve was not available at any of the spare parts shop. So the valve was not installed. Furthermore, the mechanic had to do some wiring because he said that the removal of the thermostat valve disables the fan too. The fan wont turn on even if the water has reached the desired temperature. Now the car is operating without thermostat valve and has a direct fan. Experts plz guide what to do now. I was hoping that even with the removal of the thermostat valve, the radiator fan should function automatically. The car has been fed with coolant for the past one year. @xulfiqar @salman922 @capsat @zainmahdi @nightshade @khalid.shafqat @tintin1 need ur help guys

T-valve has nothing to do with fan. If fan is not working chect temerature sensor. In Cultus this is responsible for showing temp and making fan work. Also check fan relay. I am assuming all rest of the wiring is in good condition

[ayan_cdkey]

This post was flagged by the community and is temporarily hidden.

[hassaaniqbal92]

T-valve has nothing to do with fan. If fan is not working chect temerature sensor. In Cultus this is responsible for showing temp and making fan work. Also check fan relay. I am assuming all rest of the wiring is in good condition

That is what I fail to understand. My mehran does not have a t stat valve but still the fan works automatically. What's up wid cultus efi??? Every mechanic and electrician says that it doesn't work if the valve is removed

[NiGhTShAdE]

Should it work even if the thermostat valve is removed? Same happened with my car. Valve failed and the mechanic forced me to put the fan on direct

Yes it shoud work....

[NiGhTShAdE]

That is what I fail to understand. My mehran does not have a t stat valve but still the fan works automatically. What's up wid cultus efi??? Every mechanic and electrician says that it doesn't work if the valve is removed

There is absolutely no connection b/w T valve and fan's wiring. If you talk about non efi Mehran, its Auto fan switch in lower part of radiator with no connection with T valve that is why your fan was working normally

[hassaaniqbal92]

There is absolutely no connection b/w T valve and fan's wiring. If you talk about non efi Mehran, its Auto fan switch in lower part of radiator with no connection with T valve that is why your fan was working normally

I was expecting the same to happen in cultus efi. But the champion ustaads convinced me into wiring the fan as direct. And now I am regretting it

[NiGhTShAdE]

I was expecting the same to happen in cultus efi. But the champion ustaads convinced me into wiring the fan as direct. And now I am regretting it

Better avoid such people in future.

[hassaaniqbal92]

Better avoid such people in future.

Bro why is a t stat valve so scarcely available????

[NiGhTShAdE]

Bro why is a t stat valve so scarcely available????

Maybe because many people don't bother buying it when it gets faulty. They just remove the faulty valve and keep using car. Its like almost totally out of demand thing so small auto vendors dont keep it in stock. Btw it is not that rarely available in big Auto markets like Montogomery Road in Lahore.