Toyota 2L Diesel Engine Overhauling

[capsat]

@agoodfriend sir is it in the truck now rolling ? please update

[agoodfriend]

yes dear truck is rolling smoothly ,,,,,,, every thing fitted back and responding as good as it should be ,,,,,,smooth and silent and throttle response is improved many many times,,,,,,,, i drive almost 100km without speedometer ,,,,,,, just now fixing the speedometer as well ,,,,,,,,

[agoodfriend]

speedometer along with speed sensor ,,,,,,,

--

[agoodfriend]

almost every thing done ,,,,,, except few small things which will be fixed soon ,,,,, car is drive able now ,,,,,,,radiator still filled with water , will replace it with some good coolant soon ,,,,fans are on auto and i have conformed its working ,,,,,,luckily no oil leak in engine bay ,,,,,,,,

--

--

[agoodfriend]

every thing done now ,,,,,, thanks for every one who support and encourage me ,,,,,, especially capsat for proving me plastigage ,,,,,,,,, also want to say that i left with almost half of plastigage with me ,,,,,,,, i got it as a gift from capsat , and after using i want to pass it on to some one who need it free of cost ,,,,,,,,, so any one need just let me know ,,,,,,,,,,,, but offer valid only for those who are are overhauling engine at there home and doing all that as a DIY ,,,,,,,,

[agoodfriend]

i can overhaul it for you free of cost if you can manage to send it here in islamabad ,,,,,,,,pack it in wooded box made of plywood and send by "bilte" via some local truck stop ,,,,,,,,,

[omersiddiqui5482]

Sir, Jub tak khud karke na seekhun maza nahi aayega! i am planning to do this in my next annual leave in July 2020. plus after seeing your dedication i am really curious and interested in overhauling my cars engine-"How hard can that be."

Jazakallah, i am humbled by your offer.! i will try to make a complete thread like this!

[Xulfiqar]

hard?

90% of it is slapping it

10% of it is finely measuring and careful torquing.

that last 10% takes 90% of the the entire time.

[omersiddiqui5482]

"how hard can that be" was a reference to Jeremy Clarkson sir ji.. for a learned person like you this four pot is like a piece of cake.

And you are absolutely right about the last 10%. It is not just tightening the bolts up, the thing should be as per spec for the thing to run smoothly, like this 2L the gentleman here just rebuilt.

[Xulfiqar]

old mitsi 4G13 is easy as cake. - for a first timer I would suggest give it a week - as the heavy line work will really tax your muscles and the thought process of "counter holding" will slow you down a lot too.

[capsat]

@omersiddiqui5482 rest assured of my support by all means i will drag along @ser_gtr too. just plan it with enough time at hand. will not add more so thread remain on track.

@agoodfriend nice going sir all the best & thank you for kind words am always around

[Xulfiqar]

you have tooling?

you will need to buy an allen socket for the cyl head bolts

[capsat]

you will need to buy an allen socket for the cyl head bolts

you bet

[omersiddiqui5482]

Sir, that is why i am planning to do it after 6 months. i already have started my research! i have started making a list of tools that i will require with torque wrench at the top.

@capsat sir! salutations..

[TypeA]

This post was flagged by the community and is temporarily hidden.

[anon36782927]

This post was flagged by the community and is temporarily hidden.

[rajaatta]

Well we use it for Crank shaft Bearing Clearence measurement.
Clearence means the distance of crankshaft lobe with bearings surface as the distance in between will be served as a room for oil to penetrate and stays there.

[anon36782927]

This post was flagged by the community and is temporarily hidden.

[rajaatta]

Nop we use it without oil every one uses different procedures

[anon36782927]

This post was flagged by the community and is temporarily hidden.