And there is no fluid available as TS here.. Kiny see image
You need CVT FE.ANY check engine light?
What procedure you us used to replace the fluid?How much quantity used?
TC is backward compatible to TS., please use that
Hope this helps...
No check light and no error code on scanner
Can you check under bonnet the that CVT fluid is stated?
Outlet opened and further a plastic stick removed with L key... Fluid came out approx 4 lit.. And the sane qty filled from in let.. Used cvt fe as on the inlet bolt it was imbossed FE
The bolt may have been swapped out - nearly all 2ZR engine cars with the 311 CVT use the heavier CVT -TC fluid.
btw - you just changed the oil and didnt bother actually checking the fault?
Sorry for being off topic, but is there a reliable place in Karachi where I can get my vitz's (2015 model) transmission oil changed? I was thinking of getting it done from the dealership but any better option is welcome.
If you don't understand the correct procedure then go to dealership and ask them not to open chamber.Just open drain nut and plastic stick inside. Measure the quantity of oil that comes out and pour in same amount with just 50ml more. If you have similar quantity of oil left behind then drive for a kilometer or two and repeat the process. Dealership gets happy if you pay them for just one hour job.
Any particular dealership in mind? Clifton, central or defence?
Visit any, keep in mind the procedure I told you. You can go to some good oil shop too. Just do this procedure and your car will be fine InshAllah.
AssalamualaikumVery sorry for troubling you again.Does the 2007 Altis and 2od saloon have EBD or not? (They have ABS)Please let me know.
As far I know they only got abs..Ebd came in 2008 model which is 10th generation.
And the Japanese 1.3 Corolla X 2001?EBD is there or not?
The car needs to be level straight for this procedure as it relies on overflow of oil from the drain.
almost all oil change shops use ramps. The oil level cannot be set that way.
Thanks for correcting me in that. I totally forgot about this.@nasty_faizan please visit toyota dealership only. Their lift are at level O (zero).
I will suggest to cross check the lift...,I found them not in perfect level... Sometimes due to rubber pad difference and sometimes maintenance done on them results I in wrong level
Hey do you know from where to get this hydraulic jack and leveler for lifting the car and how much it costs..