Toyota corona Mark 2 1973 conversion/ modification/ upgrade

[nas2005]

Lowered from front, lowered from rear, Rear springs Changed, installed prado springs. Front Shockers changed to Land cruiser heavy duty

Rear alloys changed to 17 inch rins, 10 inch wide staggerds
Front i may change the hub to 5 stud and will either install 15 inch alloys of 15 inch 5 stud metal.

[nas2005]

NEW DISCS, all bushes changed, balls joints replaced front full suspension has been fixed

I Have also bought front full suspension of 95 mark 2, i will upgrade the front suspension after testing the car for minor issues first.

[nas2005]

[nas2005]

FRONT DISC

[OwaisYunus1]

Good to see that its coming along nicely. One suggestion though. Please take off the plastic sheet from the door cards because they look really.. well 'taxi-ish'.

[shandy26]

Lowered from front, lowered from rear, Rear springs Changed, installed prado springs. Front Shockers changed to Land cruiser heavy duty

Rear alloys changed to 17 inch rins, 10 inch wide staggerds
Front i may change the hub to 5 stud and will either install 15 inch alloys of 15 inch 5 stud metal.

nice rims btw wat u have done with ur rear tube means LSD ?? is it the one come up with mark 2 or changed by any other car???

[nas2005]

nice rims btw wat u have done with ur rear tube means LSD ?? is it the one come up with mark 2 or changed by any other car???

Rear tube has been changed to 60 inch wode, the crown pinion is atleast three times bigger than the original one and yes it is LSD 4.1 ratio matches with gear box which is also 4.1.

[nas2005]

Good to see that its coming along nicely. One suggestion though. Please take off the plastic sheet from the door cards because they look really.. well 'taxi-ish'.

Thanks bro; i understand where you are coming from but believe me it doesnt look that taxi-ish in person and that is the only way to protect it from being damaged as they are still original and in very good condition.

[OwaisYunus1]

Thanks bro; i understand where you are coming from but believe me it doesnt look that taxi-ish in person and that is the only way to protect it from being damaged as they are still original and in very good condition.

The door cards do look like they are in good nick. Also, when putting them back on, do seal the insides of the doors properly with a thick plastic sheet so that moisture cannot get in and damage the door cards.

And the rims look very nice. Are you planning on installing over fender flares?

[nas2005]

The door cards do look like they are in good nick. Also, when putting them back on, do seal the insides of the doors properly with a thick plastic sheet so that moisture cannot get in and damage the door cards.

And the rims look very nice. Are you planning on installing over fender flares?

Hi, front rim will be painted black so ot will pop even more, i am thinking of turning those rims to deep dish so the tore will come out atleast 4-5 inches more and the deep dish look will be awesome.
Yes i will cover them with plastic and yes i am after some over frnders not the usual type though some people said it looks death race type, if you search ford mustang usaf modified it is the matt green type car i like the over fendering, i think i have shared some pictures in my thread.

[shandy26]

Rear tube has been changed to 60 inch wode, the crown pinion is atleast three times bigger than the original one and yes it is LSD 4.1 ratio matches with gear box which is also 4.1.

bro which model of toyota crown and how does it costs????
crown pinion??????????

[OwaisYunus1]

Hi, front rim will be painted black so ot will pop even more, i am thinking of turning those rims to deep dish so the tore will come out atleast 4-5 inches more and the deep dish look will be awesome.
Yes i will cover them with plastic and yes i am after some over frnders not the usual type though some people said it looks death race type, if you search ford mustang usaf modified it is the matt green type car i like the over fendering, i think i have shared some pictures in my thread.

I would recommend against having the steel rims converted to deep dish because that would compromise the structural integrity of the rim. Plus they would have balancing issues and would be highly unsafe to use. Yup have seen the USAF challenger and the overfenders do look good. There's a grey mark II in Peshawar I guess that has similar flares. The simple ones would look good on it too.

[nas2005]

I would recommend against having the steel rims converted to deep dish because that would compromise the structural integrity of the rim. Plus they would have balancing issues and would be highly unsafe to use. Yup have seen the USAF challenger and the overfenders do look good. There's a grey mark II in Peshawar I guess that has similar flares. The simple ones would look good on it too.

Hi mate, these are staggerds 3 piece 10.5 inch wide rims and can be used either way that is normal as i am using or deep dish.

Do you have any pictures of mark 2 in peshawar and that usaf flates is what ia m goong for just need a guy who is bold enough to do it and not take one year to complete the job

[nas2005]

bro which model of toyota crown and how does it costs????
crown pinion??????????

Salam bro who said anything about toyota crown lol i said crown pinion that in our urdu is called guccha lol.

[OwaisYunus1]

Hi mate, these are staggerds 3 piece 10.5 inch wide rims and can be used either way that is normal as i am using or deep dish.

Do you have any pictures of mark 2 in peshawar and that usaf flates is what ia m goong for just need a guy who is bold enough to do it and not take one year to complete the job

Oops.. I thought you were talking about turning the front steel rims that are currently on the car to deep dished ones by modding them.

I had the photos of the grey one somewhere taken from Pakwheels. Let me see if I can find them.

[nas2005]

Oops.. I thought you were talking about turning the front steel rims that are currently on the car to deep dished ones by modding them.

I had the photos of the grey one somewhere taken from Pakwheels. Let me see if I can find them.

Thanks bro, yup was talking about rear, the front one i will get em painted black matt they should look good

[shandy26]

Salam bro who said anything about toyota crown lol i said crown pinion that in our urdu is called guccha lol.

bro this is wat i m asking that which vehicle tube did u install ??
and wat about front shocks and suspension . can land cruiser shocks be fit on front???

[nas2005]

bro this is wat i m asking that which vehicle tube did u install ??
and wat about front shocks and suspension . can land cruiser shocks be fit on front???

Bruv i am not sure which car tube it is, this is 60 infh wide 4.1 lsd and the center crown pinion is 3-4 bigger than the original one, since i have installed 2jz the tube had to be bigger in order to bear the torque.

Yes front shockers land cruiser, rear springs prado, front spring i think mark 2 or prado.

I have also purchased full mark 2 95 front suspension after i have tested the car on original front wishbones i will upgrade them to bigger better suspension th tyre will also come out atleast 3 inches.

[shandy26]

Bruv i am not sure which car tube it is, this is 60 infh wide 4.1 lsd and the center crown pinion is 3-4 bigger than the original one, since i have installed 2jz the tube had to be bigger in order to bear the torque.

Yes front shockers land cruiser, rear springs prado, front spring i think mark 2 or prado.

I have also purchased full mark 2 95 front suspension after i have tested the car on original front wishbones i will upgrade them to bigger better suspension th tyre will also come out atleast 3 inches.

thanx for the info....btw how much that lsd cost you, and lc shoks and front mk2 suspension cost..??

[shandy26]