Toyota Vitz Owners/Fan Club

[muzammil100]

Bro you can attach any Elm 327 device

My friend Has vitz 2013 and cheap elm 327 can do good in your case

sensor data ,error code

I dont have one. The mechanics I showed to tried to scan using their bluetooth device but it kept failing.

[walls]

[walls]

Purchased above Pioneer player for my Ride..
Found it awesome
Tomorrow will install it

Sent from my GT-I9192 using PW Forums mobile app

[tariqjamil705]

Got some maintenance work done on my Vitz 2012 last week.
Starting with CVT oil change.
For gear oil aka CVT oil change plz try to read a forum on CVT oil change for Toyota Belta Vitz Passo etc and try to find @xulfiqar bhai's posts in that forum.
Either you can go for opening the chamber approach or draining it via drain hole approach.
I went for changing oil via drain hole approach. Allen key which our common mechanics call "L key" is used to open it. After opening that nut or screw, same Allen key is used to remove the tube that is inside the chamber. Here is the tricky part, most of the mechanics including ones at 3S do know how to take that tube out but they prefer not to, as changing the oil via that bolt doesn't pay well. Usually they try convincing you that opening the chamber is must. Tell the retards that engineers who made the car are way better than them and they didn't put the drain hole and inside tube just to check oil level.
To be sure exact amount of fluid that comes out, ask the oil guy to collect it and measure the quantity of drained oil. Put back same amount of oil.
On the other hand if that's not feasible then after draining the oil put back the plastic tube into the nut hole. Do not put the screw or nut back in its place, just the tube. Put the oil via nut hole in upper part of chamber (don't remember which one is it but oil guys usually know it). When oil starts dripping from the hole, wait for it to stop. Start the car and put it in D. Again pour oil till it starts dripping again, it will roughly take 200 to 300 ml of additional oil. Alternatively you can put the screw back after the oil had initially started dripping and add roughly 200 to 250 ml of extra oil. That's it.
No need of anything else. Car will take back total of 2 to 2.5 L of CVT oil, nearly exactly the amount that was drained.
P.S. Plz don't be confused when u find someone saying it takes total of 6 or 7L of CVT oil, that's only done when you build the transmission from zero. You can't drain the whole oil, just 2 to 2.5 L of those 6 or 7 L are drained and that's what u put back in.
Also opening the chamber technique would require roughly 3.5 to 3.8 L of oil.

Excellent dear,
it is realy in detail information. I have Toyota Vitz 2013, with more than 39000 odo. I am going for its 1st oil change in Pakistan. Further i also want to change its gear oil(cvt). Should i go to some Toyota 3S for engine transmission oil(mobeloil)+gear oil (cvt) change or any other good recommendation in Lahore. What can be expected cost for engine oil change(Oil price+oil filter + and air filter price+services). What can be the expected cost for gear oil change (oil price+services). Please inform. I am not from Lahore and will be coming to Lahore just after eid so please reply early. Recommendations from other respected members are also welcome.

[chinyoti]

Purchased above Pioneer player for my Ride..
Found it awesome
Tomorrow will install it

Sent from my GT-I9192 using PW Forums mobile app

How much did you get it for? I need to change mine aswell.

[walls]

Its in 12,600
Made in Thailand

Sent from my GT-I9192 using PW Forums mobile app

[saadkhan35]

guys I am getting a one time springy noise when ever I drive away my car after its been parked for an hour or two. has anybody else faced this? sound comes just once that's it.

discussed this with mechanics they say its suspension noise, nothing to worry about.

[xubair.ashraf]

Suggestions needed for head unit for Vitz 2012. Currently it has stock one which isn't of much use. Must have aux and USB options. Navigation not necessary. Plz give some suggestions.

Sent from my QTab Q1000 using PW Forums mobile app

[walls]

Suggestions needed for head unit for Vitz 2012. Currently it has stock one which isn't of much use. Must have aux and USB options. Navigation not necessary. Plz give some suggestions.

Sent from my QTab Q1000 using PW Forums mobile app

After a lot research I have purchased above player that I shared

In less price I was able to install china dvd with back camera.. 7000 to 8500 only. But that thing is not quality sound. So I got this Pioneer brand with mixtrax option. Awsome player.
Options including usb, cd, and aux

But if you have good budget then go for good brand dvd player.. that will cost 35k plus

[xubair.ashraf]

After a lot research I have purchased above player that I shared

In less price I was able to install china dvd with back camera.. 7000 to 8500 only. But that thing is not quality sound. So I got this Pioneer brand with mixtrax option. Awsome player.
Options including usb, cd, and aux

But if you have good budget then go for good brand dvd player.. that will cost 35k plus

Thanks for the response. Currently my budget is same. Will check this one out. Can u share from where I bought it

Sent from my QTab Q1000 using PW Forums mobile app

[walls]

Thanks for the response. Currently my budget is same. Will check this one out. Can u share from where I bought it

Sent from my QTab Q1000 using PW Forums mobile app

I have purchased from HALL Road
MRM Traders.
You can see more options too.. but don't go for low quality Chinese one.. you can also go for single din player..

[xubair.ashraf]

I have purchased from HALL Road
MRM Traders.
You can see more options too.. but don't go for low quality Chinese one.. you can also go for single din player..

Ok. . So have u got that installed? Can u share pics after installation?

Sent from my SM-N9005 using PW Forums mobile app

[walls]

Yes I will install it by today or after eid.. will share pics

Sent from my GT-I9192 using PW Forums mobile app

[Nabeel_Ali]

guys I am getting a one time springy noise when ever I drive away my car after its been parked for an hour or two. has anybody else faced this? sound comes just once that's it.

discussed this with mechanics they say its suspension noise, nothing to worry about.

This comes from every vitz.

Sent from my SM-N920C using Tapatalk

[saadkhan35]

This comes from every vitz.

Sent from my SM-N920C using Tapatalk

so it comes in both of your cars? i remember you have 3rd Gen and 2nd Gen as well.

[Nabeel_Ali]

so it comes in both of your cars? i remember you have 3rd Gen and 2nd Gen as well.

Yes from both.

Sent from my SM-N920C using Tapatalk

[walls]

Ok. . So have u got that installed? Can u share pics after installation?

Sent from my SM-N9005 using PW Forums mobile app

[Thinking]

Its in 12,600
Made in Thailand

Sent from my GT-I9192 using PW Forums mobile app

i am getting u555i same model for 9K in ISB. please recheck the price.

[salmanrasheedpsh]

so it comes in both of your cars? i remember you have 3rd Gen and 2nd Gen as well.

Check Ur handbrake , get rear brake service done , mostly stuck handbrake drum

Sent from my ALE-L21 using PW Forums mobile app

[walls]

i am getting u555i same model for 9K in ISB. please recheck the price.

Wow
Big difference..
Go for it..
I have paid more at Lahore
Just check warranty etc and made by before purchasing.