Toyota Vitz Owners/Fan Club

[adil39]

3.2 liters. Total Quartz 9000 fully synthetic 5w-30 is recommended. 21kmpl on GT Road. 19kmpl on motorway. 15 kmpl in Lahore cantt (this may vary city to city)

[karimamin]

Dear Brothers,
the ECO mode in my vitz 2013 is always see ON (Yellow light in image). I have noticed it turning off sometimes when i stop in traffic. Is this a default setting in 2013 vitz? can i turn this setting off? I feel some slowness while accelerating especially when driving in slow speed i.e. under 30 kms.

Also please suggest any good place in karachi for purchasing and fitting of back camera?

Thanks

Jazak Allah

[adil39]

Relax bro.. Eco mode in Vitz is auto. When u stop, it's idle running of engine so it has to switch off. If u press the accelerator suddenly, again it will go off. Beyond 120kmph, it will go off. It has nothing to do with slowness of your car under 30kmph. It's an auto mode and u can't turn it off manually

[changwani54]

Thats normal. ECO light means tha car is having ideal consumption. If it remains always on except when u stop, then that means u drive with real light foot. Press the accelerator hard while driving and the light would disappear.

[shadowalker1]

Salam! I want to get bodykit for my vitz 2014, new shape. Can anyone tell me where can i get it from, im in rawalpindi.

[humayun.chughtai.7]

What is this error in my vitz 2004. I read the chart and according to the chart it says engine/oil emissions. Where can i get it checked in karachi, preferably areas surrounding gulshan e iqbal.
Thanks

Brother get it scanned first. Then u will have any idea about the fault.

[danishmasud]

AOA respected members,
Guys need advice and help regarding my Toyota vitz 2007. From last couple of days my car’s check engine light comes on as I drive above 100 km/h and then stays on until I don’t turn off the ignition. Car seems to drive perfectly without any issue and didn’t notice any difference in mileage as well.
Visited my nearest mechanic and ran the scanner test which shows P0148 error code due to oxygen sensor therefore I changed that sensor straight away with a used one (kabli). It went alright for couple of runs but now that check engine light is coming up again as soon as I cross 100km/h. I am unable to understand this problem . Car runs fine without any issue or knocking, this light goes off when I turn off the car and restart it, but again when I cross that speed limit it comes back again.
Will appreciate suggestion or advise regarding this issue.

[humayun.chughtai.7]

AOA respected members,
Guys need advice and help regarding my Toyota vitz 2007. From last couple of days my car’s check engine light comes on as I drive above 100 km/h and then stays on until I don’t turn off the ignition. Car seems to drive perfectly without any issue and didn’t notice any difference in mileage as well.
Visited my nearest mechanic and ran the scanner test which shows P0148 error code due to oxygen sensor therefore I changed that sensor straight away with a used one (kabli). It went alright for couple of runs but now that check engine light is coming up again as soon as I cross 100km/h. I am unable to understand this problem . Car runs fine without any issue or knocking, this light goes off when I turn off the car and restart it, but again when I cross that speed limit it comes back again.
Will appreciate suggestion or advise regarding this issue.

I think its time to get ur cat converter changed or serviced.

[danishmasud]

[quote="humayun.chughtai.7, post:12169, topic:10232, full:true"]

AOA respected members,
Guys need advice and help regarding my Toyota vitz 2007. From last couple of days my car’s check engine light comes on as I drive above 100 km/h and then stays on until I don’t turn off the ignition. Car seems to drive perfectly without any issue and didn’t notice any difference in mileage as well.
Visited my nearest mechanic and ran the scanner test which shows P0148 error code due to oxygen sensor therefore I changed that sensor straight away with a used one (kabli). It went alright for couple of runs but now that check engine light is coming up again as soon as I cross 100km/h. I am unable to understand this problem . Car runs fine without any issue or knocking, this light goes off when I turn off the car and restart it, but again when I cross that speed limit it comes back again.
Will appreciate suggestion or advise regarding this issue.

I think its time to get ur cat converter changed or serviced.

[/quote]

Thanx bro does anyine know of a good mechanic in rawalpinfi whi knows how to clean or service CAT?

[humayun.chughtai.7]

AOA respected members,
Guys need advice and help regarding my Toyota vitz 2007. From last couple of days my car’s check engine light comes on as I drive above 100 km/h and then stays on until I don’t turn off the ignition. Car seems to drive perfectly without any issue and didn’t notice any difference in mileage as well.
Visited my nearest mechanic and ran the scanner test which shows P0148 error code due to oxygen sensor therefore I changed that sensor straight away with a used one (kabli). It went alright for couple of runs but now that check engine light is coming up again as soon as I cross 100km/h. I am unable to understand this problem . Car runs fine without any issue or knocking, this light goes off when I turn off the car and restart it, but again when I cross that speed limit it comes back again.
Will appreciate suggestion or advise regarding this issue.

I think its time to get ur cat converter changed or serviced.

Thanx bro does anyine know of a good mechanic in rawalpinfi whi knows how to clean or service CAT?

Its kind of a DIY itself. You just need to visit silencer wala to get ur CAT remove from your car. Now take it to your home. Things required : 1 Carb cleaner, 2 bottles of Acid (that namak wala teezab), 500ml of thinner.
Now start ur work, first pour thinner in cat converter and let it come out from the other side with carbon particles, now spray some carb cleaner, then pour 1 bottle of acid in Cat(be careful with handling of acid) and u will see that yellow type material coming out with lots of carbon & dirt from other side. Wait for some 5 minutes and then pour good amount of water, more dirt comes out. Spray some carb cleaner again and repeat this acid pouring wala action again. Now go back to silencer wala and ask him to fit it back & Insha Allah, you will feel hell of difference.
I am suggesting you the above method due to my own experience, I also have vitz 1.3 2001 & had the same problem. But by the help of this DIY, I am very satisfied now.
Also watch some videos on youtube about Cat cleaning, they will help u.
Cheers

[gr8shehry]

Is it possible to find this complete panel for vitz 2011 model? Complete panel with button got stolen from the vitz 2011 (basic package not jewela). Where and how can we get it fixed? Thanks

[humayun.chughtai.7]

Is it possible to find this complete panel for vitz 2011 model? Complete panel with button got stolen from the vitz 2011 (basic package not jewela). Where and how can we get it fixed? Thanks

Yes you can easily get it from any kabli parts dealer.

[gr8shehry]

[quote="humayun.chughtai.7, post:12173, topic:10232, full:true"]

Is it possible to find this complete panel for vitz 2011 model? Complete panel with button got stolen from the vitz 2011 (basic package not jewela). Where and how can we get it fixed? Thanks

Yes you can easily get it from any kabli parts dealer.

[/quote]

Do you know any kabli parts dealer? Can you please tell me the location? Also any idea of how much will it cost?

[humayun.chughtai.7]

Is it possible to find this complete panel for vitz 2011 model? Complete panel with button got stolen from the vitz 2011 (basic package not jewela). Where and how can we get it fixed? Thanks

Yes you can easily get it from any kabli parts dealer.

Do you know any kabli parts dealer? Can you please tell me the location? Also any idea of how much will it cost?

Where are you located ?
I have contact number of parts dealer from peshawar. U can also check bilal gunj lahore & sultan khoo in pindi

[gr8shehry]

[quote="humayun.chughtai.7, post:12175, topic:10232, full:true"]

Is it possible to find this complete panel for vitz 2011 model? Complete panel with button got stolen from the vitz 2011 (basic package not jewela). Where and how can we get it fixed? Thanks

Yes you can easily get it from any kabli parts dealer.

Do you know any kabli parts dealer? Can you please tell me the location? Also any idea of how much will it cost?

Where are you located ?
I have contact number of parts dealer from peshawar. U can also check bilal gunj lahore & sultan khoo in pindi

[/quote]

From Karachi.

[humayun.chughtai.7]

Is it possible to find this complete panel for vitz 2011 model? Complete panel with button got stolen from the vitz 2011 (basic package not jewela). Where and how can we get it fixed? Thanks

Yes you can easily get it from any kabli parts dealer.

Do you know any kabli parts dealer? Can you please tell me the location? Also any idea of how much will it cost?

Where are you located ?
I have contact number of parts dealer from peshawar. U can also check bilal gunj lahore & sultan khoo in pindi

From Karachi.

Any karachi member will help you then.

[asifali2016]

Hello, I have installed DELLSON DV 702 BT Player in my Vitz. It is not detecting any video file(tried different formats after converting) from USB, Only detecting and Playing Audio files. Can you guide me please about this. I have not tried DVD disc yet.

[saadkhan35]

Hello, I have installed DELLSON DV 702 BT Player in my Vitz. It is not detecting any video file(tried different formats after converting) from USB, Only detecting and Playing Audio files. Can you guide me please about this. I have not tried DVD disc yet.

You need to convert your video to PSP format. i have Dellson as well and i tried a lot of formats, only format that works is the format that works on a PSP.

you can convert your files from here.

http://video.online-convert.com/convert-video-for-psp

[gr8shehry]

[quote="humayun.chughtai.7, post:12177, topic:10232, full:true"]

Is it possible to find this complete panel for vitz 2011 model? Complete panel with button got stolen from the vitz 2011 (basic package not jewela). Where and how can we get it fixed? Thanks

Yes you can easily get it from any kabli parts dealer.

Do you know any kabli parts dealer? Can you please tell me the location? Also any idea of how much will it cost?

Where are you located ?
I have contact number of parts dealer from peshawar. U can also check bilal gunj lahore & sultan khoo in pindi

From Karachi.

Any karachi member will help you then.

[/quote]

Thanks bro for the help! I bought it for 6500 with button! Also I bought LCD for 9000 and 2 vega speakers 75w for 4200. My total was 19700 with 2500 fitting cost etc

[humayun.chughtai.7]

Is it possible to find this complete panel for vitz 2011 model? Complete panel with button got stolen from the vitz 2011 (basic package not jewela). Where and how can we get it fixed? Thanks

Yes you can easily get it from any kabli parts dealer.

Do you know any kabli parts dealer? Can you please tell me the location? Also any idea of how much will it cost?

Where are you located ?
I have contact number of parts dealer from peshawar. U can also check bilal gunj lahore & sultan khoo in pindi

From Karachi.

Any karachi member will help you then.

Thanks bro for the help! I bought it for 6500 with button! Also I bought LCD for 9000 and 2 vega speakers 75w for 4200. My total was 19700 with 2500 fitting cost etc " class="emoji" alt="">

Wow, it sounds great. Have fun with your new ride.