amazing work by irfan44 ...
Bro, can you do the same for Honda City Vario with pictures ?I want to experiment this stuff with my city as well ....
Hope you can manage it
Can this be done on 2005 or 2006 cultus? because I feel these jerks when shifting gearsThe reason I am asking is because I dont think cultus is that advance
^^ I m a hobbiest. so don't Hav any cars to experiment except my own.It can b done on a city but b4 doing anything u must search for actual WOT & CT values on service manual
Sent from Somwhere using His Thumb
Okay thanks I'll look up the car manual.
Brother , in city 2007 i want to set the idle via the idle air adjust screw as u done but after search i cannot find this screw can you help me to find it.thanks in advacebr,
Consider page 4, entire thing has already been done on city 2007
thanks brother for reply ,no doubt every thing is clear in you helpful post but my question is still same where is screw for idle setting in city 2007waiting for reply
br,
I am getting 0.54 @ ct and 4.43 @ wot what to do i think throttle stop screw adjustment has been changed by cng mechanic ? btw the car is honda city i-dsi
i have already replied this on page 4, mostly answer is yes because they adjust this by hit and trial method so it can be out of calibration.
opened the throttle body today cleaned everything readjusted on ct i am getting 0.5 and wot 4.5v but as soon as i start the car ct voltage drops to 0.48 there is alot of difference in the car now its more responsive than before
Good to hear that. Yup u feel the difference after adjustment
HI IRFAN BRO....THANKS FOR YOUR GOOD STRUGGLE ABOUT TPS...can you tell us how can we do TPS on honda city ivtec...as it has DBW ........i connected the positive terminal to the current wire and other to the ground of battery......and it showed 5.0v on the meter @irfan44
Sorry for digging up an old thread.
I am getting a reading of 5.05v on the yellow wire (power source to TPS). Is that acceptable?
Had to check because getting CEL code 7, which is for TPS.
Is there any educated mechanic (except ustad) in Karachi who can do this job for my Honda City 2000..? Kindly recommend me some one..
Regards
I need to know the rpm adjustment of my 2009 corolla cuz the rpm does up and down and sometimes the car shuts down everything has been done fuel filter plugs tb service maf sensor service oil changed fuel pump and no check light is on mileage 50000km and xli thanks i really need help
Sent from my iPhone using PW Forums
Bro just attach a multimeter to ground & signal wire then move the throttle slowly with hand & watch the voltage increase. If ur TPS skips any reading then it's faulty.Do it 2-3 times to confirm
Sent from my SM-N910C using Tapatalk
I did. Everything seemed kind of perfect. I reset the ecu then, and since then i haven't seen the tps error code return.Thanks for the input though.
Irfan Bhai,
I have 5EFE with automatic transsion in 86 corolla. My multi-meter is reading 11.48 volts through signal wire. I think it should not read that much voltage on fully CLOSED throttle. and now graduate increment or decrements while opening the throttle gradually. whats wrong with TPS. Please help brother i am facing so many problemsRegards
Naveed03037501978
Ok
ส
วัสดีครับรบกวนพี่ๆหน่อยครับว่าท่านใดรู้ค่าTPS เครืองยนต์ L15A1บ้างครับพอเดีผมไปถอดน๊อตเลยใส่ไม่ตรงจุดเดิมเวลาเข้าเกียเครืองสั่นมากมีเสียงแคร๊กๆด้วยครับบางทีเกียก้จะวืดบางครังครับรบกวนด่วยครับ