What is best engine to swap in Khyber in 2019. Senior Pakwheeler Please

rare (rare) 2019-03-25 20:41:50 +0500 #42

i know a Doctor having 660cc N/A of latest generation Alto with auto transmission in his Subaru J10 1985 model. he is satisfied with fuel avg and AC performance.
and that Subaru is more or less equal in weight to Khyber.
so 660cc turbo would be good for Khyber.

fastian04 (Salman) 2019-03-25 20:49:07 +0500 #43

Here is the video i just found on YouTube..khyber with vitz engine.

omersiddiqui5482 (omersiddiqui5482) 2019-03-26 00:56:59 +0500 #44

I have seen vitz engine in charade they can be fitted but would require alterations of the mounts and the gear box...

Suzuki K10 will not fit. Alterations are never reliable...

omersiddiqui5482 (omersiddiqui5482) 2019-03-26 01:00:01 +0500 #45

Subaru is heavier in weight I had one it is a nice car if it is cared for. Has a lot of space in under the hood compared to a KHYBER and has more ground clearance. 660 Suzuki will fit but man jugaads in that car would be massive...

aliimran271 (Imran Ahmad) 2019-03-26 06:32:38 +0500 #46

1 KR FE 1.0 engine requires ABS sensor to work, but there is no ABS in khyber, ???

omersiddiqui5482 (omersiddiqui5482) 2019-03-26 10:11:28 +0500 #47

Khyber car have the First Gen Vitz Engine which is a 1SZ-FE. although i am against this alteration but there are cars with these engines on the road, Charades, Club Cultus, Subaru Justy etc:

fastian04 (Salman) 2019-03-26 11:18:20 +0500 #48

Abs has nothing to do with engine operation.. Abs setup will cost additional and may not be suitanle at all in khyber.

aliimran271 (Imran Ahmad) 2019-03-26 21:00:36 +0500 #49

on man has installed K6A Turbo in khyber and is satisfied.with economy ie 18+ in city islamabad. so i think engine is to drive car, if it drive than good, what ever manufecturer is belongs to...

aliimran271 (Imran Ahmad) 2019-03-26 21:03:59 +0500 #50

allmotors lahore, respected dear where it is located in lahore, if i have address, will be greatful

fastian04 (Salman) 2019-03-26 21:56:35 +0500 #51

Its near cinestar...township.area...kindly check their fb page bhai

omersiddiqui5482 (omersiddiqui5482) 2019-03-27 00:15:46 +0500 #52

K6A is a Suzuki. It will fit, the engine is tiny... It is a 660.

farrukhzeeshan (farrukhzeeshan) 2019-03-27 01:32:06 +0500 #53

All motor 0323 4024840... location: kot lakhpat street next to toyota township

aliimran271 (Imran Ahmad) 2019-04-02 22:30:52 +0500 #54

Finally swapping with 1SZ FE Auto transmission, engine with auto trans, uncut wiring and icu costing 75000 from multan, installation charges are 15000, mount and electrician will be contacted in a day or two,
so what is .merits and demerits of manual and auto transmission? can you guide me please

aliimran271 (Imran Ahmad) 2019-04-09 11:24:09 +0500 #55

aliimran271 (Imran Ahmad) 2019-04-09 11:28:10 +0500 #56

1SZFE 1.0L purchased from multan in 80k with uncut wiring, ICU, box, auto transmission, magnetic compressor cables etc.
So khyber project is in implementation phase.

ahmedstudio (Ahmed) 2019-04-09 14:13:58 +0500 #57

2SZ-FE 1300 CC VVT-I
CVT-TC Automatic Transmission

(Vitz, Belta, Japanese Corolla)

ahmedstudio (Ahmed) 2019-04-09 14:17:02 +0500 #58

Does being doctor matter? It's engine talk

ahmedstudio (Ahmed) 2019-04-09 14:17:47 +0500 #59

دل سے آئی ہے

fastian04 (Salman) 2019-04-09 14:45:02 +0500 #60

Isn't it the old vitz ore 2008 engine? Prices are so high now. What was the price of 1kr-fe ?

rare (rare) 2019-04-09 14:45:51 +0500 #61

i know him by profession. appology if it hurts