Wobbling

[NightHawk]

@ailiahaider

u mean after crossing jail chowrangi ( the road that goes straight towards mazaar)

[FM01]

@usman71
Looks like after repeated alignment and balancing, the problem did not go away. The only option may be you have is changing to good quality rims.

@graybmws
Its not the ball joint problem. Its only two years old car.

@Night Hawk
You can also go from civic center route pass jail chowrangi, pass Islamia College, from the roundabout take the back road of Quaid's Mazar, from the next roundabout turn left its (Shahree Quaideen). Waris workshop will be on your left.

[bilal_khan]

thanx @ alihaider
will visit the shop 2maro inshallah

[ailiahaider]

@crazy.. yr welcome bro.... Guess what, that warsi guy IS the guy from Drama "Jaagloos".. but man, he sure know how to balance a car..

[rafay324]

yar i got my car checked from the allignment and wheel balancing shop n it was ok still the car is wobbling the steering just vibrate like hell only at a speed limit from 95-115 any other help plz

[FM01]

@rafay324, @usman71,

Rafay, you are saying that the alignment and wheel balancing was okay when they checked in their shop. But, when they put the wheels back on they wobble.

I do not know if you know about tightening the wheel's nut sequence. It looks like a minor thing but its big in terms of balancing/wobbling. You can also feel vibrations on the brake pedal, and your brake rotor can be warped due to unevenly tightened or overtightened wheel nuts.

Torque wrench is the best way to tighten the nuts at equal force for all wheel nuts (in a sequence). Please check with your shop again about the nut sequence. Probably they should know about this, if not show then the sequence given below.

Wheel nut tightening sequence is given below for 4,5,and 6 wheel nuts.

[monstermodz]

Sounds like wheel balancing issues.
Are the rims in good condition? Not damaged or buckled?
Even if the tyres have been balanced correctly, if the alloys are not perfectly round they will cause vibrations at speed....speaking from experience

Also make sure the alloys centre bore (middle part of wheel) sits on the brake discs nice and tight, (after market alloys use hub centric rings to ensure proper fitment).
You should never use the bolt thread to support the alloy wheels.

On another note..
Does the steering wheel judder when you brake?
If so you may have warped front discs which can also cause vibrations.

[nadeem5476]

get the wheel barrings chkd of front wheels