Yes, it's a Cultus

[engr.naveed]

I have the same water level issue today I bought the SNA cap whenever I check the resvoir bottle its level is increased means the water is going in it but not coming back what could be the cause

same for you and in addition check the direction of overflow pipe and the one connected with radiator. if interconnected radiator wont suck coolant

[nfsmostwanted]

same for you and in addition check the direction of overflow pipe and the one connected with radiator. if interconnected radiator wont suck coolant

Can you please post the picture of what you're telling

Sent from my iPhone using PW Forums

[peace-maker]

I recently got this radiator cap

[nasirjavaid]

looks good quality, but isn't its rubber seal more wider than metal part underneath it?

[peace-maker]

looks good quality, but isn't its rubber seal more wider than metal part underneath it?

No bro. It isn't wider. I've compared it with the genuine one and its almost the same. The quality is really good I'm not sure if it's Japanese or local.

[nasirjavaid]

Last week my horn again gave up on me .... this time it won't budge even while moving the steering wheel so instead of fiddling with it myself in this hot weather and fasting, decided to take it to the electrician. He just tested few points then removed the steering wheel and took out entire steering box assembly. There I saw the wire of horn was broken. I was really stretched due to short length so he put another piece of wire and soldered back. Reassembled it and its working fine now :). Charges 200.

That electrician has very good repo in our area. The think I really like about him that he didn't used some tape on wire joint but instead he used shrink tube to secure the joint.

[peace-maker]

Last week my horn again gave up on me .... this time it won't budge even while moving the steering wheel so instead of fiddling with it myself in this hot weather and fasting, decided to take it to the electrician. He just tested few points then removed the steering wheel and took out entire steering box assembly. There I saw the wire of horn was broken. I was really stretched due to short length so he put another piece of wire and soldered back. Reassembled it and its working fine now :). Charges 200.

That electrician has very good repo in our area. The think I really like about him that he didn't used some tape on wire joint but instead he used shrink tube to secure the joint.

Thats great bro. I've never been to an electrician but I've seen so many cars having tape on their wires and it looks really ugly.

[nasirjavaid]

Thats great bro. I've never been to an electrician but I've seen so many cars having tape on their wires and it looks really ugly.

Yes maybe on open space like in hood they use tape but the space inside steering box was really compact so he used shrink tube so that it wont need to open again and again.

[engr.naveed]

Can you please post the picture of what you're telling

Sent from my iPhone using PW Forums

the upper pipe with arrow is for overflow while lower is coming from radiator. They cant be interconnected

[engr.naveed]

is this blockage of heater correctly done?
1-2
3-4
5-6

heater was connected when pipes were in following order
1-6
2-3
4-5

I think it should have been done like this to block heater. What do you guys say?
1-6
2-5
3-4

P.S ignore dirty bay. rozay hain bhaiyo

[umarkhan1]

is this blockage of heater correctly done?
1-2
3-4
5-6

heater was connected when pipes were in following order
1-6
2-3
4-5

I think it should have been done like this to block heater. What do you guys say?
1-6
2-5
3-4

P.S ignore dirty bay. rozay hain bhaiyo

why you did this?

[nasirjavaid]

the upper pipe with arrow is for overflow while lower is coming from radiator. They cant be interconnected

hmmm... you too have no clamps on these pipes...

[peace-maker]

hmmm... you too have no clamps on these pipes...

Are there any clamps on it? :o My car never had them.

[margallar]

Are there any clamps on it? :o My car never had them.

There were no clamps here

Also note two arrows, one on the cap, other on the bottle

The arrows should be aligned

[peace-maker]

There were no clamps here

Also note two arrows, one on the cap, other on the bottle

The arrows should be aligned

Ahan thanks. I'll check mine in the morning.

[nasirjavaid]

mine to has no clamps on it but I saw some cars have wire wrapped and tightened over the pipes :). so was thinking to put clamps here too, just to make sure no leakage

[peace-maker]

mine to has no clamps on it but I saw some cars have wire wrapped and tightened over the pipes :). so was thinking to put clamps here too, just to make sure no leakage

Ahan btw I'm using my car since 8 years almost and Alhamdulillah I haven't faced any leakage yet. Agar (Allah na karay) future me kabhi leakage huye toh I'll get them. I have so many of them in my car.

[nasirjavaid]

me and nfs both having coolant/water reduction issue......so finding solution to it... putting clamps is one of them

[peace-maker]

me and nfs both having coolant/water reduction issue......so finding solution to it... putting clamps is one of them

Ahan thats a good idea. A few days back my car started boiling water first I thought the water body is gone but I got it checked from Honda 2s dealership the water body was fine Alhamdulillah and the radiator needed service. So I got it serviced and got Honda genuine coolant later on I changed the radiator cap just to be on the safe side.

[margallar]

me and nfs both having coolant/water reduction issue......so finding solution to it... putting clamps is one of them

I think the steel pipes are leaking...it can possibly also be the headgasket.

You should get a compression test