Yes, it's a Cultus

[nfsmostwanted]

Done brake service on Saturday. front discs were worn out so installed new MK Kashiyama discs.
Exhaust manifold gasket was worn out and voice was like phat phat.... so installed new gasket. While opening both bolts were broken inside so had to go to kharaiya to get them out ....
changed L shape heater pipe as there was little leak... total expense as under.

MK Kashiyama discs : 800
kharadiya : 150
new studs : 150
brake service : 400
exhaust manifold service : 400
Pipe + exhaust gasket : 150
LED dom light : 350

how is the brake now brother? i'm very much concerned about brakes. sometime i feel like the cars has left the brakes( brake chor deti he) . i talked to my mechanic and he said its normal in cultus ( i beleived because our previous cultus 08 did same )

btw whats exhaust manifold service?

[nfsmostwanted]

egg-zactly.... in other pic they were looking somewhat scattered

hahaha well that may be looking bluish due to camera result and looking scattered in that pic because is standing far away from the wall

THE POINT TO NOTE is that the beam is focusing the road , (AANKHO me nai par rai )

[ali.7861]

hahaha well that may be looking bluish due to camera result and looking scattered in that pic because is standing far away from the wall

THE POINT TO NOTE is that the beam is focusing the road , (AANKHO me nai par rai )

Add fog lights

Anything But Car ABC

[nasirjavaid]

how is the brake now brother? i'm very much concerned about brakes. sometime i feel like the cars has left the brakes( brake chor deti he) . i talked to my mechanic and he said its normal in cultus ( i beleived because our previous cultus 08 did same )

btw whats exhaust manifold service?

brakes were great already but were pulling very little to left when engaged ... also there was little noise of discs touching with wheel when wheel is moved...so I thought to get it services due to importance of brake system... havent tested much after service but looks like pulling to one side is gone now ...will test more and post.

I meant manifold gasket replacement labour

[nasirjavaid]

hahaha well that may be looking bluish due to camera result and looking scattered in that pic because is standing far away from the wall

THE POINT TO NOTE is that the beam is focusing the road , (AANKHO me nai par rai )

I was thinking about the camera affect too ......yes looking closely one can see upper edges of beams

[nfsmostwanted]

Add fog lights

Anything But Car ABC

where should i place fogs yar. i love old shape bumper because there is already place for fogs

[nfsmostwanted]

brakes were great already but were pulling very little to left when engaged ... also there was little noise of discs touching with wheel when wheel is moved...so I thought to get it services due to importance of brake system... havent tested much after service but looks like pulling to one side is gone now ...will test more and post.

I meant manifold gasket replacement labour

yeah sure , do update me with the results on braking .. btw havent u ever felt like car has left the brakes?

I was thinking about the camera affect too ......yes looking closely one can see upper edges of beams

well yeah that may be due to the LOW LIGHT mode of camera

[nfsmostwanted]

Was just joking bai... Tu ne tou iska hulya he badal dya hay:p bs surf excel se dhona chor de fr dekh jahan ki tra gari bhe roshan ho jae gi

Sent from my iPhone using PW Forums

hahaha, done hogya no more washing with surf excel

[nasirjavaid]

where should i place fogs yar. i love old shape bumper because there is already place for fogs

hmmm.... me also suffering from this dilemma ... I think we should have to use bar type led light for this

[nasirjavaid]

yeah sure , do update me with the results on braking .. btw havent u ever felt like car has left the brakes?

well yeah that may be due to the LOW LIGHT mode of camera

I never felt like this even in city and on motorway brakes worked perfect. you may have to check master cylinder and brake lines thoroughly also check carefully if there is any leak?
I think I already commented on this that with passage of time brake oil absorbs moisture from air and looses its quality so if above all checked then try fully replacing brake oil. I think this model uses DOT.3 ... give it a try.

[nfsmostwanted]

hmmm.... me also suffering from this dilemma ... I think we should have to use bar type led light for this

99% people having cultus with new shape bumper are suffering from this dilemma, the BAR type leds are good for nothing brother, just shashka PLUS the rectangular fogs available in market are bigger and cant be fitted in bumper without cutting etc (they also dont look clean)

the proper fogs can be fited in old shape bumpers as the round fog lights have a very acurate beam if adjusted properly

[nfsmostwanted]

I never felt like this even in city and on motorway brakes worked perfect. you may have to check master cylinder and brake lines thoroughly also check carefully if there is any leak?
I think I already commented on this that with passage of time brake oil absorbs moisture from air and looses its quality so if above all checked then try fully replacing brake oil. I think this model uses DOT.3 ... give it a try.

so sorry for not looking at your previous comment , yes InShaaAllah i'll get the whole brake oil changed as i get back to PAK

and there are NO leaks brother i've checked it

[nfsmostwanted]

spotted this ride near JAIL ROAD ,
trust me this cultus was looking just AWESOME .
was on bike so just took one single pic

[ali.7861]

where should i place fogs yar. i love old shape bumper because there is already place for fogs

Yaar ye corners ko cut kar k ye swift k fog adjust ho saktey hain

Anything But Car ABC

[nasirjavaid]

spotted this ride near JAIL ROAD ,
trust me this cultus was looking just AWESOME .
was on bike so just took one single pic

black tint always makes it hot... I had to remove mine due to challans

[nfsmostwanted]

Yaar ye corners ko cut kar k ye swift k fog adjust ho saktey hain

Anything But Car ABC

Adjust to kuch bi hosakta he par OEM cheez ka maza e aur he bro

[ali.7861]

Can place fog here

Anything But Car ABC

[nfsmostwanted]

black tint always makes it hot... I had to remove mine due to challans

i forgot to mention, the tints on this ride were not black, they were grayish and REFLECTIVE .. the car was looking soooo COOOOL

[nfsmostwanted]

Can place fog here

Anything But Car ABC

fogs can be placed here but i dont want any cutting, alterations in the bumper

[ali.7861]

Yaar ek baat bataon ye Bumper aur grill phele se badal diye gaye hain 2005 comes with old Bumpers and grill which are now i think hard to find

Anything But Car ABC