Aoa allDosto Left aur right side pr cracks hain in ko kya karo? In ko weld karwany se resale kam tu nahi ho jay gi?
Aesa chorny sy konsa resale voe rahy ge.Get it welded.
This post was flagged by the community and is temporarily hidden.
You need to get these welded solved. And as far as I know yeh problem gas welding se solve hone Wala nahi hai.
Welder said "weld krwa lo warna sari gaddi paat jani hai" Teen dabba zindabad.
Bhai to be very honest yeh jagha shockabsorbers ka mount hai. Ager ziyada distort hota hai to gari kabhi seedhi align nahi hogi..
You need to get it strengthened ASAP also check under the fender for any such cracks...
TIG or MIG sa ya kaam ho ga. local denter isky peechy metal plate rakh kr gas weld kr dy ga.
My point exactly! This is the same case as with Cultus and Charade Lower Control Arm Mounts.
yes and in 86 corolla as well.
Omer bhae. Ap ka hukam sar ankho pr.
Bhae ye kya cheez hai? Is ka local/desi name bhi bata do. Buhat shukria
Kya matlab
what @Hassan1991 sir menat was ke jo humare usual denter ustad hote hain yeh metal ke piece laga kar gas welding kardenge which will basically be pointless!
Ager kaam acha krvana hai to piece cut weld krvao. Kaam mushkil hai but yahi tariqa hota hai.
Where can I find Tig and Mig in Pindi. Have been driving cracked car for last 21000 KMs
If you find a TIG or MIG welding facility Please also let me know and how much they cost if you ask them
I do Tig welding. But i'm from Lahore.
Can you tell us what is approximately cost of it?
It's much expensive then normal gas welding depending upon the work. And also very difficult to do on tight places like in your case.
@dani_kk guidance for ISB/RWP please