Motorcycle Engine Oils

[Automotorsport_Lover]

^^ It has 9 marks, each represent a 100ml. there are only 9 marks as the oil comes above 9th mark which is full one litre but the 10th and final mark isnt present. The above pic is not complete, see the pic i posted earlier.

[amjad635]

Thanks for sharing pics bro the amount you have filled in your junoon
i think same will be required for pridor too i think i would need to save around 200ml too

[devilskreed]

API Group III lubricants almost match Group IV synthetics, and are usually worldwide regarded as synthetics also except few countries where it is illegal to call them synthetics . They just regard them as very high quality mineral lubricants.
I believe when you find a product only marginally expensive than mineral oils but has Synthetic written on it then it belongs to API Group III base lubricants. But if it is costing twice/thrice the price then it is from Group IV.
For example Zic 4T synthetic vs Motul Synthetic

Well yes you can generally visit their official sites for more information,,typical example is shell hx5,,the sticker shows SYNTHETIC TECHNOLOGY written on the peela dabba.In fact its a highly refined hydro-cracked oil.

[faiz.aslam.121]

nice do not forget to share your experience with this oil
and bro which bike do you have?

Oh it is very bad than and that is some good quantity oil remaining in bottle
one must fill this whole bottle in engine as 125cc

Yup, as @automotorsport_lover said, it has 9 marks, and the invisible one is the 10th one:)
I own a CG-125 '13 1900Km driven:) I used AHL>AHL>Shell AX3(used to heat up a lot) and now LM:)
It feels much better than AX3, and the engine is more smooth! I took a friend who owns a CG-125 too, and he was impressed:P
The funnel thing is annoying!

[amjad635]

yeah the CG125 OHV engine heats up more i think liqui moly would
suit CG alot and your feedback shows you are happy with engine perform using LM

I liked the innovative design of Liqui moly but it is proving to be annoying :(

[Automotorsport_Lover]

Yes it flows out actually too slowly, however a little patience would be good

Sent from my ST25i using Tapatalk 2

[amjad635]

important thing is all oil should come out of bottle
baaqi if it takes some and than oil comes out of straw than still its ok no problem

the straw type mechanism will be very useful for generator refilling

[faiz.aslam.121]

important thing is all oil should come out of bottle
baaqi if it takes some and than oil comes out of straw than still its ok no problem

the straw type mechanism will be very useful for generator refilling

I asked the LM dealer if he had any of these "straws" spare as i need one of these for my generator lol!
we both think alike o_O
I hate refilling with LM, takes about 1 minute and my arm gets tired of squeezing and squeezing and squeezing and...nvm.

Btw, i use total in generator

[gull_s_777]

Underestimated the quantity while draining the oil
Resulted in mess

Level after pouring in the fresh oil

[amjad635]

oh that is not pleasant situation
Which one you using now Suzuki SGO

[waqas18]

Suzuki Genuine Oil is not good... I felt vibration at 60-70 kmph of speed.. if u constantly riding at between these speed u continuousely face vibration...

Last thursday.. I changed my GD's oil with Castrol GTX.. now there is no vibration at all.. bike is now more smooth...

[amjad635]

Pak Suzuki Recommends Thinner Grade Oil For Their All Products 10w40

In My Bike At The Moment Its AHl 20w40 Filled And This Time Bike Really Is performing Well 700+km Driven

[devilskreed]

yeah the CG125 OHV engine heats up more i think liqui moly would
suit CG alot and your feedback shows you are happy with engine perform using LM

I liked the innovative design of Liqui moly but it is proving to be annoying :(

Sir gi the plastic pipe can easily be removed with a lil force.

[amjad635]

What an idea sir g
if its easily removable one should remove it if he does not want to wait :)

[gull_s_777]

oh that is not pleasant situation
Which one you using now Suzuki SGO

Zic 4T :o :D:-#

[amjad635]

:o Zic 4t 10w40 :-#

But let see how it performs in suzuki bike recommended oil for suzuki is 10w40
i know this is the only reason why you have gone for Zic

[gull_s_777]

:o Zic 4t 10w40 :-#

But let see how it performs in suzuki bike recommended oil for suzuki is 10w40
i know this is the only reason why you have gone for Zic

Clutch is fine now with Zic. Even with cold engine, no issue.
Bike is feeling light again. And yes engine sound is a bit more now as expected on a 10W-40.
Have yet to see how it will behave on long high speed ride, and does it have really good endurance as it has synthetic written on the box.
I didn't get the chance to check its endurance on Junoon, as Junoon engine got very loud with this oil which worried me and i changed it just after using 200Km i think.

[amjad635]

It is for the first time we are hearing some positive review about Zic 10w40 :)

[amjad635]

Hello Friends Finally Atlast Liqui Moly Is Here At My Home
It Came Very Properly Packed & I Think This Packing Was Not By Tcs
I Think It Was Packed By Lahore Liqui Moly Shop Guys It Was Very Nicely
Packed Inside The Box They Also Used White Foam To Hold It In One Place In Box

I Say Thank To Automotosport Brother Who Shared Info About This Liqui Moly Dealer
In Lahore And He Co-operated Very Nicely And Atlast He Send Me Liqui Moly Bottles
Before This Contacted 3 Dealers From Different Cities But I Failed To Purchase & They Did Not Responded

Kindly Give Some Time I Will Take Further Pics & Share

Well You Know The First Thing Which I Really Wanted To Checked & Checked Also
Was The Flow Of Oil In Bottle I Mean I Really Doubted & Have Heard Too It Is A Bit Thicker Oil
But The Oil Seems To Be Flowing Very Freely In Bottle So My First Thoughts Are It Is Not Going To Be
Too Thick In Hot Pakistani Conditions For Engine Running At Very High Temp:
It Is Really Too Early To Judge Anything But These Are My Thoughts About Its Viscosity
This Seems To Be Flowing More A Bit Freely In Bottle As Compare To Shell Ax3 I Just Did A Minor Comparison
By Taking Both Bottles In Hand So My First Point Is This Is Not Very Thick OIl Its Normal As Other
So Automotosport Bro You Were Absolutely Right It Pour Freely At Low Temps

And Liqui Moly Bottles Se Germany Ki Khushboo Aa Rahe Hai :D

[amjad635]

Hello Guys Now Bike Is Filled With Liqui Moly :)
I Am Liking The Smooth Ride Of Bike & Now I Am Relaxed It Is The Genuine Oil
Filled In My Bike I Mean You Can't Do More Than This For Your Bike
The Initial Sudden Only Change I Am Noticing Is Engine Is More Smooth
I Can't Comment On Heat I Tested And Gave Full Throttle To Bike And Drove It
Mix Few Km's On Highway & Few Km On Clean Road At Full Throttle
I Did Not Feel Any Heat From Clutch Side Engine Cover But Obviously When Came Back Home
Engine Was Hot I Did Not Feel Any Huge Difference Its So Quick To Comment On That
But I Think It Will Be Clear Now Within Some Days I Do Some Time Feel Heat On My Right Foot
Which Is Near To Clutch Side When I Drive Bike In City Lets See If I Now Feel With Liqui Moly
Alteast In Todays Few Km Drive I Did Not Feel Any Heat What A Specially Liked Was Smoothness Of Engine
Engine Is More Smooth Now As Compare To AHl Which Shows Oil Is Successfully Performing

Drained AHl Oil After Around 800km Believe Me Mechanic Was Saying Why Are You Changing Oil
The Oil Came Out Was So Neat & Clean And Always My Bike Drains Clean Oil
I Showed Mechanic This Liqui Moly Oil He Said Han Yeh Kon Se Balaa Hai
He Liked The Oil But He Really Liked The Bottle And Request Me Please Give Me This Bottle
I Will Use It For Chain Lube He Was Loving That Straw
Seriously Speaking While Pouring Oil He Was Adoring It Although He Is Local Mechanic
He Is My Friend & I Mostly Go To Him As He Takes Time & Completely Drains Out It Till Last Drop

InshAllah Will Drain This OIl After 2000km Will Inspect It After 1500km
But I Think It Should Easily Do 2000km Even AHl Oil Has Successfully Done 1400km

Here Are More Pics I Opened The Box Inside The Box
Obviously Two Liqui Moly Bottle But An Email Paper Was Also
There Which Included Bunch Of Liqui Moly All Products Catalogue/Brochures
Bottles Were Wrapped In Huge Liqui Moly Shopper Bag :)

As I Opened The Cap This Funnel Came Along With It


And Yeah Certainly As Other Fellows Told It Is Very Annoying & Slow Process Filling With This
But It Is Easily Removable Can Be Removed By Pulling It Up


It Was Again Some What Slow Pouring Oil With This Too But Not Annoying
I Asked Mechanic To Remove It He Did His Best Pulled It
But In The End He Said Bus Sahe Hai Yeh Esko Remove Nahein Karte

I Had Set The Quantity Level At Home For Pridor 100 After Filling Oil
Dipstick Showed Oil Level To Upper Level Which Is Perfect
It Is Remmended In Manual To Keep Oil Level To Upper Level Mark On Dipstick