Survey by Qualaroo
+ Reply to Thread
Page 13 of 125 FirstFirst ... 311121314152363113 ... LastLast
Results 241 to 260 of 2484
Like Tree346Likes

Thread: Mehran Experience Tips and suggestions

  1. #1
    Senior PakWheeler Follow
    dr3vil's Avatar
    Join Date
    May 2009
    Posts
    11,929
    Follows
    11
    Following
    0
    Mentioned
    201 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Cool Mehran Experience Tips and suggestions

    AOA
    i have owned mehran for 7 years almost and most of the stuff has gone wrong so if some one has an issue with mehran he can ask me here i will be glad to help a mehran brother to put him out of this misery as mehran is a car that can make u go mad and pull ur hair a part KIDDING
    so some one has problem post it here i will do my best to come up with a solution
    Problem no 1: Starting in winters is a hell if ur getting late dhicka will do the trick but u need to check few things Park the car in night on petrol,Open the Self as mechs call it SULF and check barrings in it they are copper barrings and if needed so replace them else ask the electrification to clean the self,and reinstall it
    then check the battery DON'T add water over the High level mark as in winters problems is that Engine OIl freezes or gets thick and it needs extra kick from the battery
    other things related are clean the plugs and change the plug wires possible to 8mm ones and clean or replace the Point which comes in Distributor
    also check the
    +ve wire of the self is Tight to battery as most of the time its a small thing which makes u go mad

    PRoblem no 2
    :
    Axel and CV joints so CV joints are too weak in mehran and 3 years of rough driving can kill them and when replacing CV joints never go for a kabuli AXEL as they tend to be repaired most of them use Chinese ones they work good and tell the Kharaiya to never temper with the length of the Axel in fitting of the Cv joints the length should be as OEM specs
    and if the Straight joint is worn out replace it with Cross and the Cross kupa but be careful for length and the kuppa pick the kuppa which has the smoothest end which goes in to the Gearbox as it can damage Axel seals in gear box
    always use the Original Rod of ur car as its build for ur car a mechanic will suggest u to replace whole AXEL with Kabuli but its from an older model besides most of them are repaired
    Issue in top speed and pick
    when i first got the chance to Floor mehran on M1 with iridium plugs and 8mm wires bought from Shoba i was really Disappointed with results car was hitting 110km/h MAX on petrol i was so mad but in this i noticed a few things which were wrong in my car
    1 Cv joint of right axel
    2 Cylinder Packing it made dar dar sound like old taxies after 80Km/h mark
    3 and wires from shoba had no life in them they were used and abuses
    so excpet for CV joint i changed wires to new 8mm which are cheaper then shoba wali Kabuli wires and Cylinder Packing plus whole exhaust had wholes so repaired it all got her tuned from ENERCON center and after a few days i hit the M1 again plus similar iridiums were in it and this time results were amazing mehran ha 165/70/12 tires and speedo was showing 130 so u can guess what it was in real speed as big tires cause speedo to give an error 100 in speedo = 112.2 Km/h in real

    Ignition Coil replacement


    as most of mehrans have OIL ignition coil which Comes FF and it sucks it has a limited life and mechs do make a mistake when coil dies they assume that head gasket is gone and which leads to other problems.replace coil with magnetic coil which Alto and Cultus use its way better and gives an edge in starting costs were low when i did this 600 for the coil brand new but now i herd its for 1500 or something comes in a triangle box.

    Front Guarder o
    r GADRI

    as time passes Front Guarder or GADRI become rusted and weak which causes problems for mountings of the front jumping rod a new Front Guarder or GADRI is about 1000 and 4 bolts hold it in place on a non accidented car its not a big job Front bumper needs to be opened and jumping rod and 4 bolts and its the reverse process while fitting but a car which had some accident then its a job in which a denter makes some $$$$ but there is always a way around intall gaudri and all stuff and see if there is some difference on alingment of bolts of front engine mounts cut a whole with welding torch in the engine mounting plate and its easy and also make adjustments to the jumping rod u can make tires placement in the wheels where they will fit but go for some good dentor so frame can be pulled out will cost more but its the right way
    installation of Foam in Doors to reduce sounds
    its a simple task install some pieces of foam behind the lock wires and door handle wires inside the door
    open the inner door covers first take the hadle out its held with 2 screws then take the cover of handle out held with single screw then the window winder take it out but it requires a trick rool it to a point u can see the joint end of the pit take it out with a screw driver and window winder will be free
    then take the cover our its held with clips but don't put much pressure on them they can break after its out check all bolts and screws inside the doors if they are loose tight them and hit the door with ur fist so u can hear sounds now with other hand start detecting what wire is loose cut some foam and put it between the door and line
    by this u can reduce 90% of sounds in mehran
    Tire and rim size
    now we see many Kewl boys put 15s on a mehran but this little car never needs huge wheels
    best size for mehroo is 145/70/12 and 155/70/12 no other these two are best sizes


    Mehran Experience Tips and suggestions -414980

    Hanjiii Kaa Storeey Eehh !

  2. #241
    PakWheeler Follow
    faisalyz's Avatar
    Join Date
    Oct 2010
    Posts
    144
    Follows
    0
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    i mean pic # 4

  3. #242
    Senior PakWheeler Follow
    dr3vil's Avatar
    Join Date
    May 2009
    Posts
    11,929
    Follows
    11
    Following
    0
    Mentioned
    201 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by supraman2jz View Post
    Looking clean, the new owner has kept it with care.
    yeap and to my surprise its bought by some one in my colony a friend u say and he done some more things rims chromed some air press rubbers etc and more special edition stickers i saw it today morning it was in front of my alto now i see it again and i can hear the horn right now mehroo is back to the place it started every one in my place says one thing "WHY U NO SOLD IT TO ME"

    Quote Originally Posted by faisalyz View Post
    surely it is 90
    watch it carefully !!!
    yes its a 90 why 1 ride height and hood of older mehrans have buttons
    Hanjiii Kaa Storeey Eehh !

  4. #243
    PakWheeler Follow
    MUNZALEEN's Avatar
    Join Date
    Mar 2011
    Location
    Multan
    Posts
    781
    Follows
    1
    Following
    0
    Mentioned
    7 Post(s)
    Tagged
    2 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    sure it is 90 yarr.
    agar bonnet se button ghaib karwta to paint karwana parta na.

  5. #244
    Senior PakWheeler Follow
    supraman2jz's Avatar
    Join Date
    Jun 2008
    Location
    Karachi
    Age
    33
    Posts
    2,700
    Follows
    1
    Following
    0
    Mentioned
    76 Post(s)
    Tagged
    1 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by Xulfiqar View Post
    brake squeal is eliminated by applying a special greasy sticky paste on the back of the brake pads, and correctly lubricating the brake caliper sliders and pad carriers with high temperature silicon grease.
    I'm sorry I used the wrong word, it isn't squealing, it's more of a hard scratching sound, like metal to metal rubbing. It continues to this day! If it was brake squeal I'd live with it. But this is some other ****.

  6. 31-03-2012, 08:48 AM

    Site Banned

    Reason
    Spam

  7. #245
    Senior PakWheeler Follow
    dr3vil's Avatar
    Join Date
    May 2009
    Posts
    11,929
    Follows
    11
    Following
    0
    Mentioned
    201 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by supraman2jz View Post
    I'm sorry I used the wrong word, it isn't squealing, it's more of a hard scratching sound, like metal to metal rubbing. It continues to this day! If it was brake squeal I'd live with it. But this is some other ****.
    im sure leather change karo use soft lathers it happened with me as most of problems i already faced them
    Hanjiii Kaa Storeey Eehh !

  8. #246
    PakWheeler Follow
    mani_11's Avatar
    Join Date
    Jun 2010
    Location
    Rawalpindi
    Age
    26
    Posts
    304
    Follows
    0
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    what is the best solution for fog lights in mehran..??
    can we install some gud bulb in indicators and use them as fog lights and use yellow bulbs in dim lights and use them as indicators?? car under consideration is 2007mehran..

  9. #247
    Senior PakWheeler Follow
    dr3vil's Avatar
    Join Date
    May 2009
    Posts
    11,929
    Follows
    11
    Following
    0
    Mentioned
    201 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by mani_11 View Post
    what is the best solution for fog lights in mehran..??
    can we install some gud bulb in indicators and use them as fog lights and use yellow bulbs in dim lights and use them as indicators?? car under consideration is 2007mehran..
    Fog lights need a good reflective material on the back and indicator lights on 05+ models are round and low reflective surface plus using dim lights on new model lights is just stupid in night time when light will be on full beam then no one can see ur indicator coz its a small blub in head light and fog lights are available for older shape for fitting in bumpers
    but u can fit any shape on the bumpers make sure adjust them and install them to other side of no plate both close to each other
    Hanjiii Kaa Storeey Eehh !

  10. #248
    PakWheeler Follow
    mani_11's Avatar
    Join Date
    Jun 2010
    Location
    Rawalpindi
    Age
    26
    Posts
    304
    Follows
    0
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by ekdrifter View Post
    Fog lights need a good reflective material on the back and indicator lights on 05+ models are round and low reflective surface plus using dim lights on new model lights is just stupid in night time when light will be on full beam then no one can see ur indicator coz its a small blub in head light and fog lights are available for older shape for fitting in bumpers
    but u can fit any shape on the bumpers make sure adjust them and install them to other side of no plate both close to each other
    hmmm thanks for the suggestion bro..

  11. #249
    PakWheeler Follow
    meezatechnologies's Avatar
    Join Date
    Dec 2011
    Location
    Karachi
    Posts
    26
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    yaar mehran 2001 ff cng kia average dayti hai ? today i m facing problem with Cng average, my car run 1KM cost RS.9.3 of cng.

  12. #250
    Senior PakWheeler Follow
    dr3vil's Avatar
    Join Date
    May 2009
    Posts
    11,929
    Follows
    11
    Following
    0
    Mentioned
    201 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by meezatechnologies View Post
    yaar mehran 2001 ff cng kia average dayti hai ? today i m facing problem with Cng average, my car run 1KM cost RS.9.3 of cng.
    Sir jahan tak meri knowledge hai mehran mein ff kit 2002 k december mein aye thi and tuning karva lo computerized tuning plus check leakge are u using a/c coz of it car gives bad avg
    Hanjiii Kaa Storeey Eehh !

  13. #251
    PakWheeler Follow
    mani_11's Avatar
    Join Date
    Jun 2010
    Location
    Rawalpindi
    Age
    26
    Posts
    304
    Follows
    0
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by ekdrifter View Post
    Sir jahan tak meri knowledge hai mehran mein ff kit 2002 k december mein aye thi and tuning karva lo computerized tuning plus check leakge are u using a/c coz of it car gives bad avg
    bro what is computerized tunning?
    and can u tell me some place from where i can get it done in rawalpindi islamabad

  14. #252
    Senior PakWheeler Follow
    dr3vil's Avatar
    Join Date
    May 2009
    Posts
    11,929
    Follows
    11
    Following
    0
    Mentioned
    201 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by mani_11 View Post
    bro what is computerized tunning?
    and can u tell me some place from where i can get it done in rawalpindi islamabad
    ITs done form Enercon Centers they charge little more then normal guys but once u do Tappets and all adjustment from them they monitior every thing on Computer system and can get the mixture exact not like Gari ko race de de k uska engine mar den try to find ENERCON in Islamabad or pindi
    Hanjiii Kaa Storeey Eehh !

  15. #253
    PakWheeler Follow
    meezatechnologies's Avatar
    Join Date
    Dec 2011
    Location
    Karachi
    Posts
    26
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by ekdrifter View Post
    Sir jahan tak meri knowledge hai mehran mein ff kit 2002 k december mein aye thi and tuning karva lo computerized tuning plus check leakge are u using a/c coz of it car gives bad avg
    meri car main landirenzo kit hai, car main pak suzuki CNG ka sticker bhi hai, haan aik baat hai meri car main cng filling kay point per aik brass pin nahi hai, woh nahi hai...main nay aksar cars main dekhi hai, kahin aisa to nahi kay wahan say lealkage hoo, aik sawal or hai k air filer say cng consumption main fark parta hai ya nahin ? car main ac hai but not working..............

  16. #254
    Senior PakWheeler Follow
    dr3vil's Avatar
    Join Date
    May 2009
    Posts
    11,929
    Follows
    11
    Following
    0
    Mentioned
    201 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by meezatechnologies View Post
    meri car main landirenzo kit hai, car main pak suzuki CNG ka sticker bhi hai, haan aik baat hai meri car main cng filling kay point per aik brass pin nahi hai, woh nahi hai...main nay aksar cars main dekhi hai, kahin aisa to nahi kay wahan say lealkage hoo, aik sawal or hai k air filer say cng consumption main fark parta hai ya nahin ? car main ac hai but not working..............
    What u mean by that brass cover which is on the filler woh nahi hai
    bhai aaj kal 50 rs ka sticker milta hai ps CNG wala take pics of both ur cylnder and Kit then will really tell its FF or local
    Air filter se kafi farak parta hai after 5000km mehran tappets karvana mangti hai do CNG tunning and tappets air filter gaurd wala best hai
    Hanjiii Kaa Storeey Eehh !

  17. #255
    PakWheeler Follow
    atherrr's Avatar
    Join Date
    Jun 2009
    Location
    Toronto
    Age
    24
    Posts
    446
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by ekdrifter View Post
    AOA
    i have owned mehran for 7 years almost and most of the stuff has gone wrong so if some one has an issue with mehran he can ask me here i will be glad to help a mehran brother to put him out of this misery as mehran is a car that can make u go mad and pull ur hair a part KIDDING
    so some one has problem post it here i will do my best to come up with a solution
    i will share problems and their cure In my First Post......

    Problem no 1: Starting in winters is a hell if ur getting late dhicka will do the trick but u need to check few things Park the car in night on petrol,Open the Self as mechs call it SULF and check barrings in it they are copper barrings and if needed so replace them else ask the electrification to clean the self,and reinstall it
    then check the battery DON'T add water over the High level mark as in winters problems is that Engine OIl freezes or gets thick and it needs extra kick from the battery
    other things related are clean the plugs and change the plug wires possible to 8mm ones and clean or replace the Point which comes in Distributor
    also check the
    +ve wire of the self is Tight to battery as most of the time its a small thing which makes u go mad

    PRoblem no 2
    :
    Axel and CV joints so CV joints are too weak in mehran and 3 years of rough driving can kill them and when replacing CV joints never go for a kabuli AXEL as they tend to be repaired most of them use Chinese ones they work good and tell the Kharaiya to never temper with the length of the Axel in fitting of the Cv joints the length should be as OEM specs
    and if the Straight joint is worn out replace it with Cross and the Cross kupa but be careful for length and the kuppa pick the kuppa which has the smoothest end which goes in to the Gearbox as it can damage Axel seals in gear box
    always use the Original Rod of ur car as its build for ur car a mechanic will suggest u to replace whole AXEL with Kabuli but its from an older model besides most of them are repaired
    Issue in top speed and pick
    when i first got the chance to Floor mehran on M1 with iridium plugs and 8mm wires bought from Shoba i was really Disappointed with results car was hitting 110km/h MAX on petrol i was so mad but in this i noticed a few things which were wrong in my car
    1 Cv joint of right axel
    2 Cylinder Packing it made dar dar sound like old taxies after 80Km/h mark
    3 and wires from shoba had no life in them they were used and abuses
    so excpet for CV joint i changed wires to new 8mm which are cheaper then shoba wali Kabuli wires and Cylinder Packing plus whole exhaust had wholes so repaired it all got her tuned from ENERCON center and after a few days i hit the M1 again plus similar iridiums were in it and this time results were amazing mehran ha 165/70/12 tires and speedo was showing 130 so u can guess what it was in real speed as big tires cause speedo to give an error 100 in speedo = 112.2 Km/h in real

    Ignition Coil replacement


    as most of mehrans have OIL ignition coil which Comes FF and it sucks it has a limited life and mechs do make a mistake when coil dies they assume that head gasket is gone and which leads to other problems.replace coil with magnetic coil which Alto and Cultus use its way better and gives an edge in starting costs were low when i did this 600 for the coil brand new but now i herd its for 1500 or something comes in a triangle box.

    Front Guarder o
    r GADRI

    as time passes Front Guarder or GADRI become rusted and weak which causes problems for mountings of the front jumping rod a new Front Guarder or GADRI is about 1000 and 4 bolts hold it in place on a non accidented car its not a big job Front bumper needs to be opened and jumping rod and 4 bolts and its the reverse process while fitting but a car which had some accident then its a job in which a denter makes some $$$$ but there is always a way around intall gaudri and all stuff and see if there is some difference on alingment of bolts of front engine mounts cut a whole with welding torch in the engine mounting plate and its easy and also make adjustments to the jumping rod u can make tires placement in the wheels where they will fit but go for some good dentor so frame can be pulled out will cost more but its the right way
    installation of Foam in Doors to reduce sounds
    its a simple task install some pieces of foam behind the lock wires and door handle wires inside the door
    open the inner door covers first take the hadle out its held with 2 screws then take the cover of handle out held with single screw then the window winder take it out but it requires a trick rool it to a point u can see the joint end of the pit take it out with a screw driver and window winder will be free
    then take the cover our its held with clips but don't put much pressure on them they can break after its out check all bolts and screws inside the doors if they are loose tight them and hit the door with ur fist so u can hear sounds now with other hand start detecting what wire is loose cut some foam and put it between the door and line
    by this u can reduce 90% of sounds in mehran

    Almost wateevr u said was absouletly correct but theres one thing very wrong according to me nd my experience....
    i have kpt 3 mehrans since last 7 years.....nd the first two of them had there original coil in them which worked absoluetly perfect for 3 years( as long as i have kept the car....)

    NOW..the mehran which im using currently had a coil of cultus in it..or wat u called magnetic coil...its the small one compared to mehrans original...nd it heated up nd expired one day...nd i had to change it to the orignals mehrans....
    so ur probably nor correct in this part
    Religion and Science are not at odds, Science is just too young to understand.

  18. #256
    Senior PakWheeler Follow
    dr3vil's Avatar
    Join Date
    May 2009
    Posts
    11,929
    Follows
    11
    Following
    0
    Mentioned
    201 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by atherrr View Post
    Almost wateevr u said was absouletly correct but theres one thing very wrong according to me nd my experience....
    i have kpt 3 mehrans since last 7 years.....nd the first two of them had there original coil in them which worked absoluetly perfect for 3 years( as long as i have kept the car....)

    NOW..the mehran which im using currently had a coil of cultus in it..or wat u called magnetic coil...its the small one compared to mehrans original...nd it heated up nd expired one day...nd i had to change it to the orignals mehrans....
    so ur probably nor correct in this part
    we kept mehran for 7 years and that car is still with my neighbor and still running fine i had coil issues back in 2008 oct and from that time its running with magnetic coil without a single problem probably u got low quality coil plus an experienced electrician is needed to install it not any baboon with wire cutter and tape can install it. most of electricians miss judge wiring for magnetic coil its a bit different.
    Hanjiii Kaa Storeey Eehh !

  19. #257
    PakWheeler Follow
    atherrr's Avatar
    Join Date
    Jun 2009
    Location
    Toronto
    Age
    24
    Posts
    446
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Ur talking about experienced mechanic....how about an inexperienced mechanic with a GENUINE COIL that company is Giving u.....ur making ur own theories...u hav kept a mehran for 7 yearss..nd i have kept 3 mehrans within 7 years....nd coil is no issue as long as u havv orignal one...
    Religion and Science are not at odds, Science is just too young to understand.

  20. #258
    PakWheeler Follow
    atherrr's Avatar
    Join Date
    Jun 2009
    Location
    Toronto
    Age
    24
    Posts
    446
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    aapki ye theory k mehran ki orignal cheezain utaar k cultus nd alto ki cheezain lagan shuru kardo....is DEAD WRONG
    Religion and Science are not at odds, Science is just too young to understand.

  21. #259
    Senior PakWheeler Follow
    dr3vil's Avatar
    Join Date
    May 2009
    Posts
    11,929
    Follows
    11
    Following
    0
    Mentioned
    201 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by atherrr View Post
    Ur talking about experienced mechanic....how about an inexperienced mechanic with a GENUINE COIL that company is Giving u.....ur making ur own theories...u hav kept a mehran for 7 yearss..nd i have kept 3 mehrans within 7 years....nd coil is no issue as long as u havv orignal one...
    if original goes wrong then?
    dude ask any electrical engineer magnetic coil is newer why does newer cars use these? and not merhan wala from the 80's its better
    plus u are right according to ur experience but the one kabuli is all wahsed up and new one which they say is JENIAN isn't at all
    Hanjiii Kaa Storeey Eehh !

  22. #260
    Senior PakWheeler Follow
    dr3vil's Avatar
    Join Date
    May 2009
    Posts
    11,929
    Follows
    11
    Following
    0
    Mentioned
    201 Post(s)
    Tagged
    7 Thread(s)
    Problems Posted
    0
    Problems Solved
    0
    Best Answers
    0
    Good Answers
    0

    Default

    Quote Originally Posted by atherrr View Post
    aapki ye theory k mehran ki orignal cheezain utaar k cultus nd alto ki cheezain lagan shuru kardo....is DEAD WRONG
    Agar lagti toh kia maza hota ma mehran sale na karta cultus ka g10b efi swap kara leta aur pher mehran ki speede hoti
    and i have alto now and coil in alto looks same but it isn't same wiring is different
    Hanjiii Kaa Storeey Eehh !

+ Reply to Thread

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •