My new ride Vitz 2006, fresh import

2006

Tags: #<Tag:0x007fb3f3c26f10>

ahamid (ahamid) 2012-02-13 15:57:05 +0500 #61

@syed-shoaib,

Masha Allah. Allah naseeb kare.

Have you also checked your cabin air filter? It might also need cleaning / replacement. It is located behind the passenger glove-box (you will have to slide it out).

syed-shoaib (syed-shoaib) 2012-02-13 16:52:13 +0500 #62

JazakAllah brother.

No I havnt check it yet. I will go for an A/C service in the end of March or start of April. I will get the cabin filter checked at that time inshAllah.

regards,

syed-shoaib (syed-shoaib) 2012-02-13 17:01:56 +0500 #63

hmm I have read some information on internet about the CVT fake feeling of normal gearbox shifting. That's an eye opening thingi for me

JazakAllah for informing me.

tyrone_40 (tyrone_40) 2012-02-14 04:04:52 +0500 #64

Make sure your present when they do it and also that they do a complete drain and refill as mentioned by one PW member here in a post, about changing CVT transmission

TheTransformers (TheTransformers) 2012-02-14 04:30:34 +0500 #65

Bohat Bohat Mubarak ho Shoaib bas ALLAH har nazar say bachaye Ameen

syed-shoaib (syed-shoaib) 2012-02-14 04:54:05 +0500 #66

Bohat jazakAllah sir. Allah app ko bhi apni hifz o aman main rakhay. Ameen.

regards,

syed-shoaib (syed-shoaib) 2012-02-14 05:05:07 +0500 #67

jazakAllah for all the information you have provided sir. The oil is now finally changed. And the pictures are uploading right now

syed-shoaib (syed-shoaib) 2012-02-14 05:10:15 +0500 #68

So that's the place from where we started. Here's the procedure which I saw:

1) The bolts were removed.

syed-shoaib (syed-shoaib) 2012-02-14 05:12:45 +0500 #69

2) Gear oil started to drip :)

syed-shoaib (syed-shoaib) 2012-02-14 05:16:28 +0500 #70

3) The lid was removed.

4) The panel was cleaned with Petrol.

syed-shoaib (syed-shoaib) 2012-02-14 05:21:53 +0500 #71

5) After cleaning the Lid started to look clean and shiny

6) WD-40 and Nasa Carb cleaner were utilized. The silicon gel in the background was used to seal the container.

akhterrasool (akhterrasool) 2012-02-14 05:22:32 +0500 #72

Beautiful Car. Allah mubarik kare or mehfooz rakhe. Ameen.

nina (nina) 2012-02-14 05:23:31 +0500 #73

sir any difference BTW 1.0 and 1.3 version price

FlyBoys (FlyBoys) 2012-02-14 05:25:14 +0500 #74

Congrats Man ! How much did it cost you ?!

syed-shoaib (syed-shoaib) 2012-02-14 05:28:11 +0500 #75

7) The seal was created using silicon gel. Hmmm. I think the technician can use this skill to bake cakes and put chocolate linings on them

8) Putting the lid back at its place. Afterwards we waited for one hour, so that, the silicon becomes hard and take its proper place as seal.

syed-shoaib (syed-shoaib) 2012-02-14 05:32:56 +0500 #76

9) And here's the Toyota Genuine CVT Oil. Time to get it in.

10) Here we go! The last step. The technician first filled it until the oil started to drop from a hole under the hood. Afterwards he started the car and kept it running for some time in idle. When it became hot he put it in gear and accelrated it for some time. Afterwards he fed more gear oil to check if there is some more space remaining.

Thats it!! I have got new CVT Thanks to Allah. Allhumdulilah.

syed-shoaib (syed-shoaib) 2012-02-14 05:35:59 +0500 #77

Thank bro. JazakAllah. Here the cost:

Labor: 2500 Rs.
Gear Oil: 4200 Rs. (4 Liter)
Silicon Gel: 250 Rs.

Total: 6950 Rs.

regards,

syed-shoaib (syed-shoaib) 2012-02-14 05:38:28 +0500 #78

The price of Car or the price of OIL Change ?

Well I think you r asking for the ride's price. Oh yes there is a difference. 1.0 is available in between 10.2k to 10.6k but 1.3 is above 11k.

regards,

syed-shoaib (syed-shoaib) 2012-02-14 05:41:28 +0500 #79

The really needed prayer! Bohat jazakAllah bro. May Allah keep you safe and sound too. Ameen

regards,

HAshims (HAshims) 2012-02-14 05:57:42 +0500 #80

you did the very right thing with your transmission. I ended up damaging my transmission for using ATF in CVT.
Now just enjoy your properly maintained ride.