10th Generation Civic Owners/ FanClub Discussion Thread

[zeeguy]

those also. If it does then that would mean a mechanical issue

Thanks for detailed response.
I heaven t changed tyres since Honda Fort workshop confirmed tyres are okay and no flat bed found.

I will try changing RIM/Tyres with another wise to confirm. I am still using the BG LUXO.

[khuram2703]

Adding to it first rotate the front tyre rims with rear ones and then try..... BGs in some cars create shudder. Wobbling starting from 40km/h indicates three things.

1. Tyres front
2. Rims front
3. Inner axles ( very rare chance) but can happen.

Hope it will be diagnosed.... keeping the air pressure at 30 for checking.

[Abdullah_Xia]

Assalam O Alikum Brothers, I want to tell u people that I got petrol from a PSO pump in this bottle and after filling my pressure washer's fuel tank till its neck,this much petrol remained in bottle,I mistakenly placed it under direct sunlight for about 4 hours !! its colour changed from pure light green(which normally its colour is when u get it from the pump) to dark green and this black residue was settled down at the bottom of bottle;When i lightly shaken the bottle, the particles of residue came up ,those can be seen in the pics attaced !! I want u people to conduct the same experiment with a very small amount of petrol from any of ur nearst pump to confirm that either all of us are getting this poor fuel or only pump i got fuel from is having that poor fuel;and can someone tell what kind of residue is this???

[Abdullah_Xia]

well my pressure washer's tank was previously having fuel​ that's why it got filled with about a liter,and half a liter was left in the bottle.

[binyameen488]

My car is about 200km driven and I drove it for the first time on motorway and faced exactly the same issue, wobbling at 40 - 70 and then better at 90+

Tyre: BG
Pressure: 32

Should I bring down the pressure to 30?

[ag3ntx]

Installed trunk liner

[ag3ntx]

[Bonhomie]

So picked my FL from showroom yesterday, it was kinda dusty so couldn’t spot any thing on the pain job but rest of everything was good as told however later on after getting the vehicle cleaned I spotted brownish specks here and there on about whole vehicle. It was at that moment when the long list disappointing experiences bestowed by Pkdms flashed before my eyes and with a sigh I said to myself; here we go again..

Took new ride back to showroom next day where they did best to downplay this bs and showed me 3 more vehicles with same crap showered all over parked in display area, I honestly didn’t know what to say to them.. they made it sound like it’s a part feature of paint we picked. Pft!

[ag3ntx]

It looks like rust. Please lodge a complaint on pakistan citizen portal in Citizen Rights section and subsection consumer rights. From category list choose Products.

Attach these photos and photos of invoice. Tell the whole story.

[fastian04]

Since dealership will not do anything..as u already picked the car...try using carpro irox and then compound it it will be cleared plus use any sealant or wax afterwards..may be it got rusted as it remained park for longer in Karachi.

Customer has no value in our country after all.

[bhasnain]

File a sue against Atlas and dealership to give you faulty car.

[bhasnain]

If Honda Metallurgy is of this quality, we all should be ready to get corrosion soon on Atlas produced vehicle. Brand new car should not get rust this much early only in few weeks regardless stay in most humid city.

[nraziz]

I had rust in my grande under the hood. Dozens of spots here and there.. so not just honda.

[Bonhomie]

They admitted that it’s their fault and should have cleaned it before handing over so they’ve asked me to drop it for a day. They will clear these using 3M stuff in their detailing room, one of the area they applied paste on was cleared instantly so I’m guessing it will all be okay.. will it? I saw a couple of Tafetta White in the body shop getting this treatment done, looks like the whole lot is plagued with this rustic shower. God knows what the hell happened to their quality control.

On a brighter note, I’m really loving the drive as well as the finish and looks of the Modulo kit it came with.

[Bonhomie]

You’re spot on about consumer value.. moving away from Grande and that sore experience dealing with IMC you know, I really thought I won’t have to deal with these problems anymore but guess what they both are two faced lying pos sides of the same damn coin who’d do anything to get you sign that paper and be done with you.

[Bonhomie]

It’s in Isb, they said Mfg July 5, reached here on 10th and handed over the next day.

[fastian04]

Don't wanna hurt but despite shitty experience with imc, if u just have a look at the weld points and other finishes....civic ka Allah hi hafiz hai...m finding one under 30 lacs and 25000 plus driven are showing signs of 100k kms....horrible build

[khuram2703]

These Panels show they are not rust treated hence a Flaw at Honda Atlas Side.....

Since you got the delivery now . Immediately rush to after sales office and meet after sales Manager. Ask them to arrange Factory Engineer visit. Get the date and threat them for going into consumer court.

3S are Chays who do not resolve your issue...

[drtariqazeem]

How much ?
Location?

[ag3ntx]

Rs. 4000. Montgomery road lahore