1nz with CVT trany swap cost

engnr.mubashir (engnr.mubashir) 2023-06-09 16:31:20 +0500 #1

How much swap of 1nz with CVT cost these days if one want to swap in 11 generation corolla everyone is quoting mad amount. Anyone who have recently done or get it done in their ride.

Hassan1991 (Electrical Engineer ) 2023-06-09 16:51:02 +0500 #2

Only R1nz engine costs 3 lac now.
We bought R1nz with manual transmission and V1nz manifolds for 124k about an year ago.

engnr.mubashir (engnr.mubashir) 2023-06-09 19:44:36 +0500 #3

What the heck that’s so much expensive. Any other affordable swap available for 11 gen corolla.

Hassan1991 (Electrical Engineer ) 2023-06-09 20:42:01 +0500 #4

Even AFE series goes in 3 lac now. That's the cheapest one.
If your engine is weak then go for rebuild.
Trend of Market prices are illogical. I bought k24a engine for 78k exactly a month before R1nz. Now complete one sets you back 450k.

engnr.mubashir (engnr.mubashir) 2023-06-09 21:40:09 +0500 #5

Engine is in good shape.
I have issue with its average in local and being underpowered as it’s auto gear shifting is sluggish required complete rebuild.
If I make if little faster with piggyback that still requires 125k to get 15nm torque and 20hp also bring gear in healthy shape requires 50k so totals 175k so that’s why thought for swap with 1nz.

Hassan1991 (Electrical Engineer ) 2023-06-09 23:02:24 +0500 #6

Well then you have to buy 1nzfe.
Or you can get your car stock map tuned to make it " feel " quicker.

pwuser165176643628 (Ali kiyani) 2023-06-09 23:55:08 +0500 #7

Elaborate on the tune, there is not turbo so how can more power be extracted

pwuser165176643628 (Ali kiyani) 2023-06-09 23:56:17 +0500 #8

Also what is the rebuild cost if ring pistons timing chain assembly and valves are changed for 2nz

engnr.mubashir (engnr.mubashir) 2023-06-10 00:14:16 +0500 #9

Turbo doubles the power and piggyback ECU can help extract more power than stock by making little rich or lean depends on conditions.

engnr.mubashir (engnr.mubashir) 2023-06-10 00:20:06 +0500 #10

They mostly add timing snd injector pulse width to extract more power on NA setup that is limited for performance.

Hassan1991 (Electrical Engineer ) 2023-06-10 00:36:59 +0500 #11

Now a days would be like 1 lac.

Hassan1991 (Electrical Engineer ) 2023-06-10 00:40:50 +0500 #12

Timing is limited to knock.
These new cars are very easy to pretend quick.
You can just change Electronic throttle table and torque table of transmission.

engnr.mubashir (engnr.mubashir) 2023-06-10 01:05:22 +0500 #13

But still room for advancement as manufacturers tune it according to euro emission standards.
Never heard if ETC and Transmission table with piggyback.

Hassan1991 (Electrical Engineer ) 2023-06-10 01:10:34 +0500 #14

They are available in stock fuel maps. Cvt's got them usually.
Highly depend upon the software used.

pwuser165176643628 (Ali kiyani) 2023-06-10 01:33:43 +0500 #15

Even rebuild is very expensive now

haseeb.basharat 2023-06-10 02:11:08 +0500 #16

Last time I checked 3zrfe 2.0L with cvt and ecu was costing 350k from shoba peshawar.