2021 Honda City GM6 Dedicated Discussion, Owner/ Fan Club Thread

[ifadey]

I will check, but from the image you posted, it looks like the engine shield is not installed properly

[dms664]

please check and if possible post photos of your car in same angle like I have posted.

[chinyoti]

Dont know about the Sheild, But when in Multan i made a wrong UTURN to go on the bridge the car literally went on the side divider and at one point stuck in the middle hanging , i didnt see anything and just pressed the accelerator so i get out of this mess, Since i had my wife with me. and i thot ill check car once i reach somewhere.

Some how it went through, People instead of helping kept shouting (NAVI GADDI DI ESSI DI TESSI KERDETI AE)

Fortunatly only scrapped some undercoat, Rest ALHAMDULILLAH 100 TIMES Nothing at all happened.

[dms664]

sir could you please just check below the hood if the belly (engine shield) is bulging out like mine or mine one is not correctly fixed. I will be thankful really.

[ifadey]

I think your vehicle is fine. It's same as mine

Closer view

[dms664]

Many Thanks Fawad. so we have to live with it or there is any possibility to fix it a bit higher especially the 2nd shield. the first one near the bumper looks fine to me.

[ifadey]

I don't think there's any solution for this.

[pwuser165176643628]

I think there should be a way to drop the rear shocks by 2-3 inches

[dms664]

For comparison this is the sheild of corolla 1.6. It allows you all the ground clearance the car height is allowing/offering but in city gm6 the ground clearance is available at the back only and in the front the bulging out engine shield is eating away the ground clearance available due to increased height.

[pwuser165176643628]

Argument is understood, waiting for a professional pakwheeler to tell how to drop the city bomb

[marwan]

Anybody using 1.2 manual? What average you are getting plus how is its performance? Is it under powered? I am interested in buying one

[ifadey]

Manual version of 1.2 is fine. You may not feel it as underpowered as 1.2 CVT version.
For CVT, 1.5 engine is better option.

[dms664]

The manual specifies 3.6 litre oil change with filter whereas I have seen people pouring 3.7 litre in their aspire 1.5 gm6. Please guide as I proceeds for my first oil change.

[ifadey]

100ml won't do any harm.
The key is stay between min/max limit.
With 3.7 liters, the level stays way under max

[dms664]

You're right.
Got the oil and oil filter changed and with 3.7 complete jug poured in the oil is hardly touching the top mark. Whats the catch?

[ifadey]

The correct quantity of oil doesn't mean it will touch the full mark. In fact, touching the upper is not a good idea.

[dms664]

While inspecting the under carriage I found a black box type of device which the honda tech identified as charcoal canister and told that it is placed outside the tank as it is bigger. In Toyota and other cars we were advised to autofill the tank and not to the brim so that fuel doesn't get into the charcoal canister. If the charcoal canister of gm6 city is outside it means we can safely fill the tank to the brim?

[dms664]

In Toyota if you put specified amount it always cross the top mark. In corolla gli it is 3.7 litre with filter but people pour 3.5 because it always cross the top mark if you pour 3.7. Nevertheless i always poured 3.7 in my ex ride and it was fine.
Reading your comment now I am ok as I was the view that oil level is less if its not touching or exceeding the top mark.

[zeeshan-hdr]

As per manual, oil level should be in the middle

[zeeshan-hdr]