Hello Guys
Up for sale are a lot of Brand New 24 cc Four Stroke Gas Engines and i am having arround 60 engines and the engines are in very good condition and have a test run for less then 1 to 2 hours so that it is ensured that all the engines are in perfect working condition.These engines are a new modle of Honda Leaf blower Engine.
starting procedure
Converted 26 cc four stroke gas engine for sale - YouTube
These engines can be used for various purposes and the projects that i have carried out with these engines are as follows
1.For Rc Airplanes:
I have used one of my 24 cc four stroke gas engines to power a 1/5th scale rc airplane because this engine have a walbro pumping carbeutor which is very useful for an rc airplane as it sucks the fuel from the fuel tank and you dont have to put a new pumping sustem in it and the weight of will not increase
2.For Electric Generator
I am dealing in commercial generators in Pakistan for about 8 years and i have a lot of experience in it.As a hooby activity i have also made a small DC generator from my 24cc four stroke engine and as an alternator i have used a 24 volts DC motor which are commonly used in electric scooters and the maximum output was about 24volts and 12ampheres so the out put was about 288 Watts.
If you are worried about the fuel consumption of this engine ,then dont worry about it because it is a very fuel efficient engine and you can also place a gas kit on it which will cost you Rs.999 and it comes with a 10 year warranty
3.For Motorized Bicycle
After all that i am in the process of converting my bicycle into a motorized bicycle by the use of my 24cc four stroke gas engine and from the calculations i am aspecting a that the maximimum speed will be about 60 Km/hr and it can for 1 litter of fuel it wii cover a distance of about 150 Kilometers
The discription of these engines are as follows
price:Rs. 3,000(ONLY)
RPM: 7,500
Made: Japan
Weight: 2.5 kg
Displacement: 24 cc
Horsepower: 1.2
Ignition System: Transistorized magneto
Engine Type: Four stroke
Carburetor: Walbro Pumping Carbeutor(no need to mount the fuel tank above the engine)
Net torque 1.1 N.M at 5,000 RPMs
i will also send this engine to all over Pakistan and several other countries for a very small shipment charges
If you guys want any other information about the engine then feel free to contact me at my email address or call me the following are a few pics of the engine
email address falconsamad@gmail.com
(for quick response)
phone no 021-34117013
Abdul Samad
