2jz Suzuki FX

[pwuser150545863947]

Complete modification of Suzuki FX with 2JZ engine.

Built by Amjad Ustad and his 2 brothers at Kashmiri Market, High court Rd, Car Chowk Rawalpindi.

If need any work done contact:- (Shezard)03458577736

[abuzarabdurrehman1]

Share some pictures of the car.

[Hassan1991]

Waste of money,time,car and engine.

[ali454]

People put jet engines in cars. How is this a waste of time and money?

[Hassan1991]

All those swaps are done my americans , have you seen any jet engine swapped car in Pk?
There's no comparison between there fabrication then with our mechanics fabrication....Reason they are proper trained and educated. They done ton's of calculations before swap. Just look at the quality, look at the front bumper did he know how much drag it produces? How much drag spoiler produces? What should be the center of gravity of the car? etc etc.....what a waste.

[ali454]

My dear friend please be generous enough to admire the amount of effort coming out from a small dirty workshop.

Im sure the man behind this didnt want to set record lap timings; for that there has to be a circuit present in the first place.

Atleast he can put a big ass sticker on the back that says: "Built not Bought".

[Hassan1991]

Bhai muja koe shooq nae degrade krna ka but it's useless now. Just a show car.
It's better to restore that car to it's original specs and believe me it's much more difficult to what he has done. If he want a drag Fx then there's many option for swap rather then that. Now there's nothing original left in that car.

[ali454]

Youre not getting the point.

[asadalizai]

I guess the point was to make a fast car. We shouldnt hurry in making any statements. Let the car perform and we'll know what to do. Either praise or critcise.

[Hassan1991]

Agreed

[pwuser150545863947]

The owner of ther cars objective was to build a drag car in the smallest possible car available in Pakistan.

But I respect the guys who have worked on this car as they worked hard to get this car to this point. They did everything in a small backstreet garage as a challenge. Btw it’s still not complete.

[pwuser150545863947]

its Been changed to rear wheel drive.

[Hassan1991]

will be waiting for a run video "if it's a drag car"

[deltree]

Its going to be fast as Fck and unsafe as Fck

[mehrozniazi1]

its good for fun ..but no use for drag ..on stock boost it wont catch up with top guns..and this chassis wont last long and cant take more then 400 hp ..... if its done on tubframe then it can work

[pwuser149510964772]

great project and car looks awesome i think its first project on local FX

[aliaamar1101]

This post was flagged by the community and is temporarily hidden.

[OwaisYunus1]

This looks like a fun project! But something that can turn ugly really quick. I hope they've strengthened the chassis in some way, ideally the addition of a tube frame.

I really appreciate the effort that must've gone into it. At times, a project car doesnt have to make sense, its the uniqueness and the ingenuity behind it that sets it apart. However, it is important that they take safety seriously and the least that should be done is install a tubular cage inside it to protect the occupants in case something untoward happens.

I have always been fascinated by the idea of a G13b Turbo in an FX, RWD! This however is on another level, which of course would pose concerns of a similar magnitude as well.

Would be looking forward to seeing it run and more details on the transmission, diff, brakes and suspension.

[zahid.shafi.5851]

can you tell me any institute that would teach us Extensively about aerodynamics in Pakistan so we could guide others to the right path and any other technical institute same as quality education given abroad hope so it would make other people succeed

[aliaamar1101]

This post was flagged by the community and is temporarily hidden.