3sfe Distributor Problem

[YamahaYB100]

The problem is every time when I go to service station the guy washes the engine bay with pressurized water aor bas khaori shuru distributor kholo point ,rotor aor plug wire saaf karo ya agar barish ho gaye tu missing shuru
I changed the distributor cap on mechanic recommendation but it's same as before

Anyone knows the proper solution
I also saw an engine without distributor now the question is that is it possible to remove distributor and add the coils setup

[waqar19]

Which car?

[YamahaYB100]

Which car?

mazda b2200

[waqar19]

Kindly check plug wires continuity and check for moisture in dist. cap.
And next time don't let them wash the engine.Do it yourself at home while engine is cold. Because its harmful while engine is hot, especially to diesel engines.
Experts can explain better about distributor problem.

[YamahaYB100]

Is it possible to remove dist. and add only coils

[YamahaYB100]

Anyone

[Xulfiqar]

use silicone grease on the cap end - and DONT wash the engine with water - leave it alone, if you do want to wash it then do it yourself when its dead cold and simply spray and wipe.

[YamahaYB100]

use silicone grease on the cap end - and DONT wash the engine with water - leave it alone, if you do want to wash it then do it yourself when its dead cold and simply spray and wipe.

Thanks a lot sir but kya is ka distributor khatam kar k sirf coils lag sakti hain . Kyun k distributor cap body ko touch karta hai aor jab kholna ho tu azaab hai

[Xulfiqar]

thats only possible with a different ecu, a pulse trigger for the ECU to run 4 ignitors etc. or you can do a relocate kit that works like the 4AGE 20V in RWD platform.